1. Introducció
This manual provides essential instructions for the installation, operation, maintenance, and troubleshooting of your Juniper EX2200-C-12T-2G Layer 3 Switch. Please read this manual thoroughly before using the device to ensure proper functionality and safety. The Juniper EX2200-C-12T-2G is a compact, fanless, and power-efficient platform designed for low-density micro branch deployments, commercial access, or enterprise workgroup environments.
2. Producte acabatview
2.1. Característiques clau
- Silent and power-efficient operation.
- Compact and fanless form factor.
- Layer 3 switching capabilities.
- 12 x 1000Base-T RJ-45 ports.
- 2 x SFP ports.
- Runs on Junos Operating System.
2.2. Contingut del paquet
Verifiqueu que tots els elements siguin presents al paquet:
- Juniper EX2200-C-12T-2G Layer 3 Switch
- Cable d'alimentació
- 12 x 1000Base-T RJ-45 cables (Ethernet cables)
- 2 x SFP cables
2.3. Descripció física
The Juniper EX2200-C-12T-2G switch features a robust design with various ports and indicators on its front panel.
Figura 1: Frontal view of the Juniper EX2200-C-12T-2G Layer 3 Switch. This image displays the front panel of the switch, highlighting the 12 RJ-45 Ethernet ports, two SFP uplink ports, console ports (RJ45 and Mini-USB), and various status LEDs including SYS, SPD, ALM, DX, CON, EN, and PoE indicators.
Figure 2: Alternative front view of the Juniper EX2200-C-12T-2G Layer 3 Switch. This perspective offers a clearer view of the port numbering (0-11 for RJ-45 ports) and the labeling of the SFP ports and management interfaces.
3. Configuració
3.1. Preparació del lloc
- Medi ambient: Place the switch in a clean, dry, and well-ventilated area. Ensure the ambient temperature does not exceed 40 degrees Celsius.
- Muntatge: The compact design allows for desktop placement or wall mounting (mounting hardware not included).
- Font d'alimentació: Connect the switch to a reliable power outlet using the provided power cable. The switch operates on 230 Volts.
3.2. Connexió del commutador
- Connexió d'alimentació: Connect the power cable to the switch's power inlet and then to an appropriate electrical outlet.
- Connexions de xarxa:
- Ports RJ-45: Use the provided 1000Base-T RJ-45 cables to connect network devices (computers, servers, other switches) to the 12 Ethernet ports (labeled 0-11) on the front panel.
- Ports SFP: Insert SFP transceivers (if required) into the two SFP ports and connect fiber optic cables for uplink or high-speed connections.
- Console Connection (Initial Configuration): For initial configuration and management, connect a serial cable from your management workstation to the CON (console) port on the switch. Alternatively, a Mini-USB console port is also available.
4. Instruccions de funcionament
4.1. Encès
Once the power cable is connected, the switch will automatically power on. The boot process for the Junos OS may take several minutes.
4.2. Indicadors LED
Superviseu els LED del panell frontal per comprovar l'estat de funcionament:
- SYS (Sistema): Indicates the overall system status. Typically solid green for normal operation.
- SPD (Velocitat): Indicates the link speed of the connected port.
- ALM (alarma): Indicates an alarm condition. Refer to the Junos OS documentation for specific alarm codes and troubleshooting.
- DX (Duplex): Indicates the duplex mode of the connected port.
- CON (Console): Indicates activity on the console port.
- EN (Enable): Indicador d'estat.
- PoE (alimentació per Ethernet): If applicable, indicates PoE status for ports. (Note: This model does not explicitly list PoE as a feature, but the LED is present).
4.3. Configuració
The Juniper EX2200-C-12T-2G switch is managed using the Junos Operating System via a Command Line Interface (CLI). Access the CLI through the console port or via SSH after initial network configuration. Refer to the official Juniper Networks Junos OS documentation for detailed configuration procedures, including VLAN setup, routing protocols, and security settings.
5. Manteniment
5.1. Atenció general
- Keep the switch clean and free from dust. Use a soft, dry cloth for cleaning.
- Ensure adequate airflow around the device, even though it is fanless, to prevent heat buildup.
- Eviteu exposar l'interruptor a temperatures extremes, humitat o llum solar directa.
5.2. Actualitzacions de firmware
Comproveu periòdicament el suport de Juniper Networks website for available Junos OS updates. Applying updates can improve performance, add new features, and address security vulnerabilities. Follow the instructions provided by Juniper Networks for safe firmware upgrade procedures.
6. Solució De Problemes
6.1. Problemes d'energia
- Sense energia: Verify the power cable is securely connected to both the switch and the power outlet. Check the power outlet with another device.
6.2. Problemes de connectivitat
- Sense enllaç: Check the Ethernet or fiber optic cables for secure connections and damage. Verify the connected device is powered on and functioning correctly. Observe the port's Link/Activity LED.
- Connexió lenta: Ensure cables are appropriate for the desired speed (e.g., Cat5e/6 for Gigabit Ethernet). Check for duplex mismatches or network congestion.
6.3. Alarm LED On
If the ALM LED is illuminated, it indicates a system alarm. This could be due to various reasons such as hardware failure, environmental issues, or configuration errors. Access the switch's CLI via the console port to view detailed alarm messages and logs. Consult the Junos OS documentation or Juniper Networks support for specific alarm interpretations and resolution steps.
7. Especificacions tècniques
| Característica | Especificació |
|---|---|
| Número de model | EX2200-C-12T-2G |
| Marca | Juniper Networks |
| Pes de l'article | 4.41 lliures |
| Dimensions del producte (LxWxH) | 9 x 11 x 2 polzades |
| Voltage | 230 Volts |
| Material de la caixa | Plàstic |
| Classificació de temperatura superior | 40 graus centígrads |
| Tipus d'interfície | RJ45, SFP |
| Velocitat de transferència de dades | 1000 megabits per segon |
| Nombre de Ports | 12 (RJ-45) + 2 (SFP) |
| RAM | 512 MB |
| Mida de la memòria flash | 1024 MB |
| Sistema operatiu | Junos |
8. Garantia i Suport
8.1. Informació de la garantia
For detailed warranty information regarding your Juniper EX2200-C-12T-2G switch, please refer to the warranty card included with your product or visit the official Juniper Networks weblloc web. Els termes i condicions de la garantia poden variar segons la regió i la data de compra.
8.2. Suport tècnic
If you encounter issues that cannot be resolved using the troubleshooting steps in this manual, or require advanced assistance, please contact Juniper Networks technical support. Support resources, including documentation, knowledge bases, and contact information, are available on the official Juniper Networks support portal.
