Kohler K-1997-4-0

KOHLER Brenham Wall Mount Lavatory K-1997-4-0 User Manual

Model: K-1997-4-0

Introducció

This manual provides comprehensive instructions for the installation, operation, and maintenance of your KOHLER Brenham Wall Mount Lavatory, model K-1997-4-0. Please read this guide thoroughly before beginning installation or use to ensure proper function and longevity of your product. This wall-hung lavatory is crafted from vitreous china, offering both durability and a refined aesthetic suitable for various bathroom environments.

Informació de seguretat

Always observe basic safety precautions when installing or servicing plumbing fixtures. Failure to follow these instructions could result in property damage, personal injury, or death.

  • Turn off the main water supply before beginning any installation or repair work.
  • Utilitzeu equips de protecció personal adequats, com ara ulleres de seguretat i guants.
  • Si teniu dubtes sobre alguna part del procés d'instal·lació, consulteu un lampista qualificat.
  • Assegureu-vos que totes les connexions estiguin ben fixades i sense fuites abans de restablir el subministrament d'aigua.
  • Do not overtighten connections, as this may cause damage to the fixture or plumbing.

Contingut del paquet

Verify that all components are present before beginning installation. If any parts are missing or damaged, do not proceed with installation and contact KOHLER customer service.

  • KOHLER Brenham Wall Mount Lavatory Unit
  • Guia d'instruccions (aquest document)
  • Mounting Hardware (may vary by package)

Configuració i instal·lació

This section outlines the general steps for installing your wall-mount lavatory. Specific details may vary based on your plumbing configuration and local building codes. Always consult local plumbing codes before installation.

1. Comprovacions prèvies a la instal·lació

  • Ensure the wall structure is adequate to support the weight of the lavatory when filled with water. Reinforcement may be necessary.
  • Verify that water supply lines and drain rough-ins are correctly positioned according to the lavatory's dimensions.
  • Gather all necessary tools, including a level, tape measure, drill, wrenches, and sealant.

2. Mounting the Lavatory

  1. Mark the desired height and mounting points on the wall using the lavatory's template or measurements. Ensure the marks are level.
  2. Perforeu forats pilot als llocs marcats.
  3. Secure the mounting brackets or bolts into the wall studs or appropriate anchors.
  4. Carefully lift the lavatory and align it with the mounting hardware. Secure the lavatory to the wall, ensuring it is level and stable.
KOHLER Brenham Wall Mount Lavatory K-1997-4-0

Image: The KOHLER Brenham Wall Mount Lavatory, model K-1997-4-0, shown in white. This image illustrates the overall design and wall-mount configuration of the lavatory unit.

3. Connecting Plumbing

  1. Install the faucet and drain assembly onto the lavatory according to their respective manufacturer's instructions.
  2. Connect the hot and cold water supply lines to the faucet inlets. Hand-tighten, then use a wrench for a final quarter-turn.
  3. Connect the drain tailpiece to the P-trap and then to the wall drain. Ensure all slip nuts are tightened securely.
  4. Apply a bead of silicone sealant around the perimeter of the lavatory where it meets the wall, if desired, for a finished look and moisture seal.
  5. Turn on the main water supply slowly and check for leaks at all connections. Tighten any leaking connections as needed.

En funcionament

The KOHLER Brenham Wall Mount Lavatory operates like any standard sink. Turn the faucet handles to control water flow and temperature. Ensure the drain stopper is properly seated to retain water in the basin when desired. After use, ensure the water is turned off completely to prevent waste and potential overflow.

Manteniment

Proper care and maintenance will help preserve the finish and functionality of your lavatory.

Instruccions de neteja

  • Clean the vitreous china surface regularly with a soft, dry cloth.
  • For deeper cleaning, use a mild, non-abrasive cleaner specifically designed for bathroom fixtures.
  • Avoid harsh chemicals, abrasive scrubbers, or acidic cleaners, as these can damage the finish and void the warranty.
  • Rinse the lavatory thoroughly with clean water after cleaning and wipe dry to prevent water spots.

Resolució de problemes

This section addresses common issues you might encounter with your lavatory. For problems not listed here, contact KOHLER customer service.

ProblemaCausa possibleSolució
Fuites al voltant de les connexionsLoose connections, worn washers/gasketsTighten connections. Replace worn washers or gaskets. Ensure plumber's tape or sealant was used where appropriate.
Drenatge lentClogged drain, P-trap obstructionRemove and clean the drain stopper. Clear any debris from the P-trap. Use a plumbing snake if necessary.
Water spots or stainsHard water deposits, improper cleaningWipe the lavatory dry after each use. Use a mild descaling agent for hard water spots, following product instructions.

Especificacions

Refer to the table below for key specifications of the KOHLER Brenham Wall Mount Lavatory K-1997-4-0.

CaracterísticaDetall
MarcaKohler
Número de modelK-1997-4-0
ColorBlanc
MaterialXina vítria
Dimensions del producte (P x A x A)25.82" x 9.63" x 22.88"
Tipus d'instal·lacióMuntatge en paret
Tipus d'acabatRaspallat
FormaRectangular
Tipus de drenatgeQuadrícula
Pes de l'article40 lliures
Nombre de forats1
UPC650531920195

Garantia

Your KOHLER Brenham Wall Mount Lavatory is covered by a one-year limited warranty. This warranty covers defects in material and workmanship under normal use and service. Please refer to the warranty card included with your product for full terms, conditions, and exclusions. Keep your proof of purchase for warranty claims.

Suport

For technical assistance, replacement parts, or warranty claims, please contact KOHLER customer service. You can find contact information and additional resources by visiting the official KOHLER weblloc: www.kohler.com. When contacting support, please have your model number (K-1997-4-0) and date of purchase readily available.

Documents relacionats - K-1997-4-0

Preview Especificacions tècniques del lavabo de paret Kohler KINGSTON™ K-2005, K-2006, K-2007
Especificacions tècniques i característiques detallades dels models de lavabo de paret Kohler KINGSTON™ K-2005, K-2006 i K-2007. Inclou dimensions, materials, normes aplicables i notes d'instal·lació. Compleix amb la normativa ADA.
Preview Especificacions del lavabo de bany sota encimera Kohler Ladena K-2214-G
Especificacions detallades per al lavabo de bany sota encaix Kohler Ladena K-2214-G, incloent-hi les característiques, les dimensions, els acabats disponibles, les notes d'instal·lació i el compliment de les normes ADA, CSA B651, ASME, EPA WaterSense i ICC/ANSI. Inclou informació sobre la garantia de Kohler.
Preview Lavabo d'alçada confortable Kohler CIMARRON K-3496: característiques, especificacions i diagrama
Informació detallada del producte per al vàter d'alçada Comfort CIMARRON de Kohler (model K-3496). Inclou característiques, codis i estàndards aplicables, especificacions del model, accessoris recomanats, colors, acabats, dades tècniques i un diagrama del producte amb dimensions.
Preview Kohler K-4991-ETSS Bardon High-Efficiency Urinal: Specifications & Features
Explore the Kohler K-4991-ETSS Bardon High-Efficiency Urinal. This vitreous china fixture features an antimicrobial finish, WaterSense compliance, and detailed dimensions for installation. Includes technical specs, recommended accessories, and compliance standards.
Preview Kohler Kingston Ultra K-84325: Especificacions de la tassa del fluxòmetre Top Spud
Especificacions detallades, característiques, notes d'instal·lació i informació tècnica per al fluxòmetre Kohler Kingston™ Ultra Top Spud (model K-84325). Inclou materials, tecnologia, estàndards de compliment i acabats disponibles.
Preview Tassa de fluxòmetre posterior Kohler Kingston Ultra K-84323: especificacions
Especificacions detallades per al Kohler Kingston Ultra K-84323, una tassa de vàter amb descàrrega posterior per muntar a la paret feta de porcellana vitrificada. Les característiques inclouen una tassa allargada, un sifó i el compliment de l'ADA, WaterSense i altres estàndards.