Cisco Catalyst 2960 Series Switch WS-C2960S-48TS-L User Manual

Model: WS-C2960S-48TS-L

Introducció

This manual provides comprehensive instructions for the installation, operation, maintenance, and troubleshooting of the Cisco Catalyst 2960 Series Switch, model WS-C2960S-48TS-L. Designed for optimal power efficiency and robust network performance, this switch is a key component for various network environments. Please read this manual thoroughly before operating the device.

Informació de seguretat

Pautes generals de seguretat:

Assegureu-vos de la connexió a terra adequada del dispositiu.
No feu funcionar l'interruptor en ambients humits o excessivament humits.
Use only the power supply unit provided or specified by Cisco.
Refer to local electrical codes and regulations for proper installation.
Eviteu bloquejar les obertures de ventilació per evitar el sobreescalfament.

Contingut del paquet

The Cisco Catalyst 2960 Series Switch WS-C2960S-48TS-L package should contain the following items:

Cisco Catalyst 2960 Series Switch (WS-C2960S-48TS-L)
Unitat d'alimentació

Note: Rack mount kits and power cables are typically included but may vary by seller or region.

Producte acabatview

The Cisco Catalyst 2960 Series Switch WS-C2960S-48TS-L is a high-performance network switch designed for enterprise-class access. It features 48 Gigabit Ethernet ports and supports advanced power management capabilities for efficient network operation.

Davant view of Cisco Catalyst 2960 Series Switch WS-C2960S-48TS-L, showing 48 RJ45 ports and indicator lights.

Figura 1: Frontal view of the Cisco Catalyst 2960 Series Switch WS-C2960S-48TS-L, displaying its 48 RJ45 ports and various indicator lights.

Configuració

1. Preparació del lloc

Ensure the installation site is clean, dry, and has adequate ventilation. Maintain appropriate temperature and humidity levels as per environmental specifications to ensure optimal performance and longevity of the switch.

2. Muntatge de l'interruptor

The switch can be mounted in a standard 19-inch equipment rack. Secure the rack-mount brackets (if provided) to the sides of the switch using the appropriate screws. Then, attach the switch to the rack using suitable rack screws, ensuring it is stable and level.

3. Potència de connexió

Connect the power cable to the power supply unit on the rear of the switch and then to a grounded AC power outlet. Verify that the power source meets the switch's voltagrequisits electrònics (240 volts).

4. Connexió de xarxa inicial

Connect your network devices (e.g., computers, servers, other switches) to the RJ45 ports on the front panel using standard Ethernet cables. The switch supports a data transfer rate of 1000 Megabits Per Second (Gigabit Ethernet) for high-speed connectivity.

Funcionament de l'interruptor

Encès

After connecting the power cable, the switch will automatically power on. Observe the system LED indicators on the front panel for boot-up status. The system LED should turn green once the switch has successfully initialized.

Llums indicadores

The front panel features various LED indicators that display the operational status of the switch and its individual ports. These LEDs provide visual feedback on link status, activity, and potential errors. Refer to the official Cisco documentation for a detailed explanation of each LED's behavior and meaning.

Configuració bàsica

For initial configuration and management, connect a console cable to the console port (if available) and use a terminal emulation program on a computer. Alternatively, if the switch has already acquired an IP address, you may be able to access its management interface via a web browser or command-line interface (Telnet/SSH).

Manteniment

Neteja

Periodically clean the exterior of the switch with a soft, dry, lint-free cloth. Ensure that all ventilation openings are free from dust and obstructions to maintain proper airflow. Do not use liquid cleaners or aerosol sprays directly on the switch.

Actualitzacions de firmware

Regularly check the official Cisco support website for available firmware updates for your specific model. Keeping the firmware current ensures optimal performance, security, and access to new features. Always follow Cisco's official procedures for firmware upgrades to avoid potential issues.

Consideracions ambientals

Operate the switch within its specified temperature and humidity ranges. Extreme environmental conditions can lead to device malfunction or premature failure. Ensure the operating environment is stable and within recommended limits.

Resolució de problemes

Sense poder

Verify the power cable is securely connected to both the switch and a functional power outlet.
Check the power source (e.g., wall outlet, power strip) for functionality.
Ensure the power supply unit is correctly seated and connected to the switch.

Sense connectivitat de xarxa

Check the link status LEDs on the connected ports. If an LED is off, verify the Ethernet cable connection at both ends.
Ensure the connected device (e.g., computer, server) is powered on and functioning correctly.
Verify that the network configuration (IP addresses, VLANs) is correct for the connected devices and the switch.

Mal funcionament del sistema

If the switch exhibits unusual behavior or error messages, consult the official Cisco documentation for specific error codes or LED patterns. A factory reset might be necessary as a last resort, but be aware that this will erase all custom configurations on the switch.

Especificacions

The following are key specifications for the Cisco Catalyst 2960 Series Switch WS-C2960S-48TS-L:

Característica	Detall
Número de model	WS-C2960S-48TS-L
Marca	Cisco
Nombre de Ports	48 (RJ45)
Velocitat de transferència de dades	1000 megabits per segon (Gigabit Ethernet)
Tipus d'interfície	RJ45
Voltage	240 Volts
Pes de l'article	10.6 lliures (aprox. 4.81 kg)
Dimensions del producte	17.52 x 11.77 x 1.77 polzades (aprox. 44.5 x 29.9 x 4.5 cm)
Dispositius compatibles	Desktop (and other network devices)

Informació de la garantia

This Cisco Catalyst 2960 Series Switch WS-C2960S-48TS-L typically comes with a standard manufacturer's warranty. For specific warranty terms and conditions, including duration and coverage, please refer to the documentation provided with your purchase or visit the official Cisco website. Any additional warranties offered by sellers are separate and should be verified with your point of purchase.

Atenció al client

For technical assistance, product documentation, or further support regarding your Cisco Catalyst 2960 Series Switch, please visit the official Cisco support website. You can find detailed contact information, knowledge bases, and resources on Cisco's Support Portal. Ensure you have your product model number (WS-C2960S-48TS-L) ready when contacting support.

	Guia de transició de les sèries Cisco Catalyst 2960/2960-SF/2960-S Una guia per a la transició dels models de commutadors Cisco Catalyst més antics a la sèrie Cisco Catalyst 2960-L, que destaca les funcions i les rutes de migració.
	Guia de configuració d'instal·lació intel·ligent de Cisco Apreneu a configurar Cisco Smart Install per a una implementació sense contacte i una gestió eficient d'imatges/configuracions dels commutadors de xarxa Cisco. Aquesta guia tracta la configuració, la gestió de clients, la configuració de DHCP/TFTP i les estratègies d'agrupació.
	Guia de configuració fàcil de la sèrie Cisco Catalyst 2960-L Una guia pas a pas per configurar fàcilment el commutador Cisco Catalyst sèrie 2960-L, que cobreix la connexió i la configuració bàsica.
	Guia de commutadors de Cisco: informació completaview de Solucions de Commutació LAN Un acabatview de l'extensa cartera de commutadors LAN de Cisco, que detalla commutadors modulars, de configuració fixa, blade i virtuals per a campXarxes de sucursals i centres de dades dels EUA. Destaca l'escalabilitat, la intel·ligència i les funcions avançades.
	Notes de la versió dels commutadors de les sèries Cisco Catalyst 3560-CX i 2960-CX: Cisco IOS 15.2(7)Ex Notes de la versió 15.2(7)Ex del programari Cisco IOS per als commutadors de les sèries Catalyst 3560-CX i 2960-CX, que detallen les característiques, les advertències i els requisits del sistema.
	Notes de la versió del commutador Cisco Catalyst sèrie 3650: Cisco IOS XE Denali 16.2.x Aquest document proporciona notes de la versió per al commutador Cisco Catalyst sèrie 3650 que executa el programari Cisco IOS XE Denali 16.2.x. Detalla les noves funcions de maquinari i programari, notes importants i models de maquinari compatibles.

Cisco WS-C2960S-48TS-L