1. Introducció
This manual provides comprehensive instructions for the safe installation, operation, and maintenance of your Lutron Nova T NT-600-WH Incandescent Dimmer. Please read these instructions carefully before beginning installation or use. Retain this manual for future reference.
Informació important de seguretat
- ADVERTIMENT: Per evitar incendis, descàrregues elèctrices o la mort, desconnecteu l'alimentació a l'interruptor o a la caixa de fusibles i comproveu que estigui apagada abans de connectar el cablejat.
- Instal·leu segons tots els codis elèctrics nacionals i locals.
- Use only with incandescent or halogen lighting loads. Do not use with fluorescent, LED, or low-voltage lighting unless specifically rated for those types.
- No instal·leu si el producte té danys visibles.
- Només per a ús interior.
2. Producte acabatview
The Lutron Nova T NT-600-WH is a 1-pole, 600W slide-to-off dimmer designed for incandescent and halogen lighting. It provides smooth, continuous dimming control and features a thin profile for easy installation. The slide control allows for precise adjustment of light levels, while the integrated switch turns the lights completely off.
Figura 2.1: Frontal view of the Lutron Nova T NT-600-WH Dimmer.
Característiques principals:
- Single-pole application (controls light from one location).
- 600W maximum capacity for incandescent/halogen bulbs.
- Slide-to-off functionality for full range dimming and positive off.
- Pro primfile disseny.
- Operates at 120V AC.
3. Especificacions
| Especificació | Valor |
|---|---|
| Número de model | NT-600-WH |
| Marca | Lutron |
| Wattage | 600W |
| Voltage | 120 V AC |
| Tipus de canvi | 1-Pole (Single-Location Control) |
| Compatibilitat del tipus de bombeta | Incandescent, Halògen |
| Mode d'operació | Automatic, Off |
| Tipus d'actuador | Diapositiva |
| Tipus de terminal | Terminals de cargol |
| Color | Blanc |
| Dimensions (L x A x A) | 0.3 x 2.75 x 4.56 polzades |
| Pes de l'article | 6.4 unces |
| Classificació de protecció internacional | IP54 |
| UPC | 027557392006 |
4. Instal·lació (Configuració)
Eines necessàries:
- Tornavís (Phillips i/o de punta plana)
- Pelacables
- Cinta elèctrica (opcional)
- Voltage provador
Passos previs a la instal·lació:
- Apagueu l'alimentació: Locate the circuit breaker or fuse that controls the light switch you are replacing. Turn it OFF.
- Comproveu que l'alimentació estigui apagada: Utilitzeu un voltage tester to confirm that power is off at the switch box.
- Remove the existing wall plate and switch from the wall box.
- Carefully disconnect the wires from the existing switch. Note which wire was connected to which terminal.
Instruccions de cablejat:
The Lutron NT-600-WH dimmer is designed for single-pole applications. It typically has two black wires (load/line) and one green ground wire.
Figura 4.1: Esquena view of the dimmer with wiring connections.
- Cable de terra: Connect the green ground wire from the dimmer to the bare copper or green ground wire in the wall box. If no ground wire is present, consult a qualified electrician.
- Line/Load Wires: Connect the two black wires from the dimmer to the two wires that were connected to your old switch. For single-pole applications, these wires are interchangeable. Use wire nuts to secure connections.
- Cablejat segur: Ensure all wire connections are tight and secure. Gently push the wires and the dimmer into the wall box.
- Regulador d'intensitat de muntatge: Fixeu el regulador d'intensitat a la caixa de paret amb els cargols proporcionats.
- Instal·leu la placa de paret: Attach the new or existing wall plate over the dimmer.
- Restaura l'alimentació: Torneu a encendre l'alimentació a l'interruptor automàtic o a la caixa de fusibles.
5. Funcionament
The Lutron Nova T NT-600-WH dimmer provides simple and intuitive control over your incandescent or halogen lighting.
Encendre/apagar els llums:
- To turn the lights ON, slide the control lever upwards. The lights will turn on to the previously set dimming level.
- To turn the lights OFF, slide the control lever all the way down until it clicks into the 'off' position.
Dimming/Brightening Lights:
- A il·luminar the lights, slide the control lever upwards.
- A dim the lights, slide the control lever downwards.
6. Manteniment
Your Lutron Nova T dimmer is designed for long-lasting performance with minimal maintenance.
Neteja:
- Desconnecteu sempre l'alimentació a l'interruptor automàtic abans de netejar.
- Netegeu el regulador d'intensitat i la placa de paret amb un drap suau iamp drap. No utilitzeu netejadors abrasius, dissolvents ni esprais químics, ja que poden danyar l'acabat o els components interns.
- Ensure the dimmer is completely dry before restoring power.
Atenció general:
- Do not paint the dimmer or wall plate.
- Ensure the dimmer is not overloaded beyond its 600W capacity. Overloading can cause premature failure and is a fire hazard.
7. Solució De Problemes
If you experience issues with your dimmer, refer to the following common problems and solutions:
| Problema | Causa possible | Solució |
|---|---|---|
| Lights do not turn ON. | Power is off at the breaker; loose wiring; bulb burned out. | Check circuit breaker; verify wiring connections; replace bulb. |
| Els llums no s'atenuen ni parpellegen. | Incorrect bulb type (not incandescent/halogen); dimmer overloaded; loose wiring. | Ensure bulbs are incandescent/halogen; check total wattage does not exceed 600W; verify wiring. |
| El regulador d'intensitat és càlid al tacte. | Normal operation for dimmers. | This is normal. If it is excessively hot or smells of burning, turn off power immediately and consult an electrician. |
| Dimmer makes a buzzing sound. | Some buzzing is normal with certain incandescent bulbs; dimmer overloaded. | Try different brand of incandescent bulbs; ensure total wattage no supera els 600W. |
If the problem persists after trying these solutions, turn off power at the circuit breaker and contact a qualified electrician or Lutron customer support.
8. Garantia i Suport
Lutron products are manufactured to high-quality standards and are typically backed by a limited warranty. For specific warranty details, please refer to the documentation included with your purchase or visit the official Lutron weblloc.
Atenció al client:
For technical assistance, troubleshooting beyond this manual, or warranty inquiries, please contact Lutron customer support directly. You can often find contact information on the product packaging or on the official Lutron weblloc.
També podeu visitar el Botiga Lutron a Amazon per obtenir més informació sobre el producte i recursos.
