1. Introducció
This manual provides essential information for the safe and effective use of your Eiko EYB 82V 360W T3-1/2 G5.3 Base Halogen Lamp. Please read these instructions carefully before installation and operation to ensure proper function and longevity of the product.
2. Informació de seguretat
Halògen lamps operate at high temperatures and contain pressurized gas. Improper handling or use can result in personal injury or property damage. Adhere to the following safety guidelines:
- Desconnecteu sempre l'alimentació de l'aparell abans d'instal·lar, treure o netejar elamp.
- Permet la lamp to cool completely before handling to prevent burns.
- Avoid touching the glass envelope of the lamp with bare hands. Oils from skin can create hot spots, leading to premature failure. Use a clean cloth or gloves during handling.
- No excedeixi el vol especificattage i wattage per al teu aparell.
- Assegureu-vos que lamp is securely seated in its base before applying power.
- Eliminar l'usatamps according to local environmental regulations.
3. Configuració i instal·lació
Follow these steps for proper installation of the Eiko EYB halogen lamp:
- Desconnexió d'alimentació: Ensure the power supply to the fixture is completely turned off and locked out if possible.
- Refrigeració: Si es substitueix una l existentamp, allow it to cool down for at least 15 minutes to prevent burns.
- Old Lamp Eliminació (si escau): Carefully grasp the old lamp and pull it straight out from the G5.3 base. Avoid twisting if the base is a push-in type.
- Nou Lamp Manipulació: Handle the new Eiko EYB lamp by its ceramic base. Do not touch the glass bulb with bare hands. If the glass is accidentally touched, clean it thoroughly with rubbing alcohol and a lint-free cloth before installation.
- Inserció: Align the two pins of the Eiko EYB lamp with the holes in the G5.3 base. Gently push the lamp straight into the base until it is fully seated. Do not force the lamp.
- Reconnexió d'alimentació: Un cop lamp estigui instal·lat correctament, restableix l'alimentació a l'aparell.
Un primer pla view of the Eiko EYB halogen lamp, showing its clear glass envelope, coiled tungsten filament, and the white ceramic G5.3 base with two metal pins. The base is labeled with 'EIKO EYB 82V 360W CHINA'.
4. Instruccions de funcionament
The Eiko EYB halogen lamp is designed for straightforward operation within compatible fixtures.
- Encès/apagat: Activate the fixture's power switch to turn the lamp encès o apagat.
- Atenuació (si escau): Aquesta lamp is dimmable. If your fixture is equipped with a compatible dimmer switch, you can adjust the light output. Ensure the dimmer is rated for halogen lamps and the total wattage of the installed lamps.
5. Manteniment
Regular maintenance helps ensure optimal performance and longevity of your Eiko EYB halogen lamp.
- Neteja: Si la lamp's glass envelope becomes dusty or dirty, disconnect power and allow it to cool. Gently wipe the glass with a clean, dry, lint-free cloth. For stubborn marks, use a small amount of rubbing alcohol.
- Inspecció: Inspeccioneu periòdicament la lamp for any signs of damage or discoloration. If the lamp appears dim or flickers, it may be nearing the end of its lifespan.
- Substitució: Substituïu la lamp when it fails or when its light output significantly diminishes. Always replace with a lamp of the same voltage i wattage (Eiko EYB 82V 360W) to ensure compatibility and safety.
6. Solució De Problemes
If you encounter issues with your Eiko EYB halogen lamp, consulteu els problemes i solucions habituals següents:
| Problema | Causa possible | Solució |
|---|---|---|
| Lamp no s'encén | No power to fixture, loose connection, faulty lamp, faulty fixture | Check power supply, ensure lamp is fully seated, replace lamp, inspect fixture wiring |
| Lamp és tènue | Lamp nearing end of life, incorrect voltage, dirty glass | Substitueix lamp, verify fixture voltage, clean lamp vidre |
| Lamp fails prematurely | Sobrevoltage, improper handling (fingerprints), excessive vibration, faulty fixture | Verifica el volum de l'aparelltage, handle with gloves, ensure stable mounting, inspect fixture |
If problems persist after attempting these solutions, consult a qualified electrician or the fixture manufacturer.
7. Especificacions
Key technical specifications for the Eiko EYB 82V 360W T3-1/2 G5.3 Base Halogen Lamp:
- Marca: Eiko
- Model: EYB
- Voltage: 82 Volts
- Wattage: 360 watts
- Tipus de llum: Halògen
- Mida de la forma del bulb: T3-1/2
- Base de la bombeta: G5.3
- Color clar: Blanc brillant
- Temperatura de color: 3300 Kelvin
- Brillantor: 10000 lúmens
- Material: Tungstè
- Dimensions del producte: 1 x 1 x 2.7 polzades
- Pes de l'article: 1.6 unces
- Característica especial: Regulable
8. Informació de la garantia
This product is covered by the manufacturer's standard warranty. For specific details regarding warranty terms, duration, and claims procedures, please refer to the official Eiko weblloc web o contacteu directament amb el servei d'atenció al client d'Eiko. Conserveu el rebut de compra com a comprovant de compra.
9. Suport i informació de contacte
For technical assistance, product inquiries, or further support, please contact Eiko customer service.
- Fabricant: Eiko
- Weblloc: Refer to Eiko's official weblloc web per obtenir dades de contacte actuals.
- Atenció al client: Refer to Eiko's official weblloc web per obtenir dades de contacte actuals.
