1. Producte acabatview
The Ecowitt HP2561 Wi-Fi Weather Station provides comprehensive weather monitoring with its advanced 7-in-1 wireless outdoor sensor and a vibrant 7-inch TFT display console. This system allows you to track various environmental parameters both indoors and outdoors, and upload data to popular online weather services.
Contingut del paquet
- 1 x HP2560_C Wi-Fi Display/Console
- 1 x WS69 7-in-1 Outdoor Sensor
- 1 x Wind speed cups (to be attached to outdoor sensor body)
- 1 x Wind vane (to be attached to outdoor sensor body)
- 2 x U-Bolts for mounting on a pole
- 4 x Threaded nuts for U-Bolts (M5 size)
- 1 x Metal mounting plate to be used with U-Bolts
- 1 clau per a cargols M5
- 1 x 2.5*0.7mm DC 5V power cord
2. Configuració i instal·lació
2.1 WS69 7-in-1 Wireless Outdoor Sensor
The WS69 outdoor sensor array integrates multiple sensors for comprehensive data collection. It includes a Thermo-hygrometer, Rain Gauge, Wind Speed Sensor, Wind Direction Sensor, Light and UV sensor, and a Solar panel.
Assemblea
- Attach the wind speed cups to the designated shaft on the outdoor sensor body.
- Attach the wind vane to its corresponding shaft on the outdoor sensor body.
- Assegureu-vos que totes les connexions siguin segures.
Font d'alimentació
The WS69 sensor is primarily powered by its built-in solar panel. For backup power, install 2 x AA 1.5V LR6 Alkaline or 2 x AA 1.5V Lithium batteries (not included) into the battery compartment. Ensure correct polarity.
Muntatge
Mount the outdoor sensor in an open area to ensure accurate readings for wind, rain, and sunlight. Use the provided U-bolts and metal mounting plate to secure it to a pole. Common mounting locations include roofs or garden poles.
2.2 HP2560_C 7'' TFT Display Console
Powering the Console
Connect the provided 5V DC Adapter to the console and plug it into a power outlet. The console will power on automatically.
Configuració inicial i aparellament
Upon first power-up, the console will attempt to connect wirelessly with the WS69 outdoor sensor. Ensure the outdoor sensor is powered on and within range (up to 100m/330ft in open field). The console will display collected data once paired.
Configuració Wi-Fi
To upload data to internet weather services and view it on the Ecowitt App, you need to configure the console's Wi-Fi settings. Follow the on-screen instructions on the console to connect it to your local Wi-Fi network. The console supports pairing with various Ecowitt consoles/gateways.
3. Instruccions de funcionament
3.1 Display Console Features
The 7-inch TFT display console features touch buttons and an adjustable backlight for optimal viewing in various lighting conditions. It supports multiple languages including English, Deutsch, Français, Italiano, Español, Nederlands, and Português, and offers dark/light background themes.
Display Layout and Data Points
The console displays various real-time and historical weather data. Refer to the diagram below for an explanation of the numbered data points:
- Cloud servers & Wi-Fi status
- Wind speed & direction data
- Soil Moisture sensor data
- Data i hora
- Outdoor temperature & humidity data
- Dades de PM2.5
- Hora de sortida i posta de sol
- Lightning data
- Temperature & humidity data
- Rainfall data
- Barometer data
- Light & UVI data
- CO₂ data
- Fase de lluna
3.2 Data Upload and Remote Monitoring
The console can push sensor data to cloud weather services such as Ecowitt.net, Weather Underground (WU), and Weathercloud. Custom server data hosting is also possible if compatible.
After Wi-Fi configuration, you can view real-time data of outdoor sensors on the WSView Plus or Ecowitt App. For remote monitoring, upload data to the free Ecowitt Weather Server at www.ecowitt.net.
3.3 Sensors opcionals
The HP2561 system supports additional optional sensors to expand its monitoring capabilities:
- Up to 8 WN31(WH31) multi-channel temperature and humidity sensors or 8 WN30 multi-channel temperature sensors.
- Up to 8 WN34 Temperature Sensors.
- Up to 4 WH41/WH43 PM2.5 air quality sensors.
- One WH45 PM2.5/PM10/CO2/temperature and humidity all-in-one sensor.
- Up to 8 WH51 soil moisture sensors.
- Up to 4 WH55 water leak sensors.
- One WH57 lightning sensor.
4. Manteniment
4.1 Outdoor Sensor Maintenance
- Neteja: Regularly clean the rain gauge funnel and the solar panel to ensure accurate readings and efficient charging. Remove any debris, leaves, or insects.
- Comprovació de la bateria: Periodically check the backup AA batteries in the outdoor sensor. Replace them when the console indicates low battery or during annual maintenance.
- Penell/Copes de vent: Ensure the wind vane and wind cups spin freely. Clear any obstructions.
4.2 Console Maintenance
- Neteja: Wipe the display screen and console body with a soft, dry cloth. Avoid abrasive cleaners.
- Actualitzacions de firmware: Consulta l'Ecowitt weblloc web o aplicació per a qualsevol actualització de firmware disponible per a la teva consola per garantir un rendiment òptim i noves funcions.
5. Solució De Problemes
- No Data on Console: Ensure the outdoor sensor is powered on and within wireless range of the console. Check the outdoor sensor's backup batteries.
- Lectures inexactes: Verify the outdoor sensor is mounted correctly in an open area, away from obstructions that could affect wind, rain, or temperature readings. Clean the rain gauge and solar panel.
- Problemes de connexió Wi-Fi: Ensure your Wi-Fi network is active and the password entered on the console is correct. If using the WSView Plus app, ensure your phone and the gateway are on the same network for local viewing.
- RF Frequency Compatibility: The WS69 sensor operates on different RF frequencies depending on the region (North America: 915MHz; Europe: 868MHz; Other areas: 433MHz). Ensure your console and sensor are compatible with the frequency used in your region.
- Data Not Uploading to Internet Services: Check your Wi-Fi connection. Verify your account settings on Ecowitt.net, Weather Underground, or Weathercloud are correct.
6. Especificacions
6.1 WS69 7-in-1 Weather Sensor
| Paràmetre | Valor |
|---|---|
| Distància de transmissió | 100 m (330 ft) in open field |
| freqüència de RF | North America: 915MHz; Europe: 868MHz; Other areas: 433MHz |
| Interval de temperatura | -40°C – 60°C (-40°F - 140°F) |
| Precisió de la temperatura | ± 1 °C o ± 2 °F |
| Resolució de temperatura | 0.1 °C o 0.1 °F |
| Interval d'humitat | 10% ~ 99% |
| Precisió de la humitat | ± 5% |
| Resolució d'humitat | 1% |
| Interval de visualització del volum de pluja | 0 – 6000 mm |
| Precisió del volum de pluja | ± 10% |
| Resolució del volum de pluja | 0.3 mm (for volume < 1,000mm) 1 mm (for volume ≥ 1,000 mm), or 0.01 in (for volume < 100 in) 1 mm (for volume ≥ 100 in) |
| Interval de velocitat del vent | 0 - 50 m/s (0 ~ 100 mph) |
| Precisió de la velocitat del vent | ± 1 m/s (speed < 5 m/s) ± 10% (speed ≥ 5 m/s), or ± 0.1 mph (speed < 11 mph) ± 10% (speed ≥11 mph) |
| Interval d'índex UV | 0-15 |
| Gamma de llum | 0 – 200 kLux |
| Precisió de la llum | ± 15% |
| Interval d'informes del sensor | 16 segons |
| Power (main) | Panell solar (integrat) |
| Power (backup) | 2 x AA 1.5V LR6 Alkaline (not included), or 2 x AA 1.5V Lithium battery (not included) |
6.2 HP2560_C TFT Display Console
| Paràmetre | Valor |
|---|---|
| Interval de temperatura | -10 °C – 60 °C (14 °F – 140 °F) |
| Resolució de temperatura | 0.1 °C o 0.1 °F |
| Gamma d’humitat | 10% ~ 99% |
| Resolució d’humitat | 1% |
| Interval de pressió baromètrica | 300 – 1,100 hPa (8.85 – 32.5 inHg) |
| Precisió de la pressió baromètrica | ± 3 hPa in 700 – 1,100 hPa range |
| Resolució de pressió baromètrica | 0.1 hPa (0.01 inHg) |
| Durada de l'alarma | 120 segons |
| Interval d'informes del sensor | 60 segons |
| Base Station/Console Power | Adaptador de CC de 5 V (inclòs) |
7. Consells d'usuari
- Col·locació òptima: For the most accurate wind and rain data, ensure the outdoor sensor is mounted in an unobstructed location, away from buildings, trees, or other structures that could interfere with readings.
- Monitorització de la bateria: Regularly check the battery status of your outdoor sensor via the console or app to ensure continuous operation, especially during prolonged periods of low sunlight.
- Regional Frequency: Quan es compraasing or troubleshooting, be aware of the RF frequency used in your region (915MHz for North America, 868MHz for Europe, 433MHz for other areas) to ensure compatibility.
- Connectivitat de l'aplicació: If experiencing issues viewing sensor data on the WSView Plus app, confirm that your phone and the weather station's gateway are connected to the same local network.
8. Garantia i Suport
For warranty information, technical support, or service inquiries, please contact Ecowitt customer service. When contacting support, please provide your product model number (HP2561) and any relevant purchase details.
You can find more information and support resources on the official Ecowitt weblloc.
