Adaptador d'entrada per a generador Anker SOLIX

Especificacions

Rated AC Input / Output	120V/240V, 60Hz, 25A Max (< 3hrs), 6000W Max/24A Max (continuous), L1+L2+N+PE
Longitud total	6.6 peus / 2 m
Interval de temperatura de funcionament normal	-4 °F a 104 °F / -20 °C a 40 °C
Garantia	2 Anys

Nota: The applicable electrical frequency of this product is 60Hz, and the electrical system is L1+L2+N+PE. Do not use an electrical system that does not meet the applicable conditions of this product.

Què hi ha a la caixa

Acabatview

1. Port NEMA L14-30P
2. Indicador d'estat
3. Port del panell d'alimentació de casa

Avís

• Anker SOLIX Generator Input Adapter is only available for Anker SOLIX F3800 Plus Portable Power Station and Anker SOLIX Home Power Panel. Do not connect the adapter directly to the grid.
• When the Anker SOLIX Generator Input Adapter is connected to the Anker SOLIX F3800 Plus Portable Power Station, the NEMA 5- 20R AC output ports on the power station will be disabled.
• The applicable electrical frequency of the adapter is 60Hz, and the electrical system is L1+L2+N+PE. Do not use an electrical system that does not meet the applicable conditions of this product.

Aplicació Anker per al control intel·ligent

Descarrega l'App
Cerca “Anker” i descarrega l'aplicació Anker a través de l'App Store o Google Play. Escaneja el codi QR següent per anar a la botiga d'aplicacions corresponent.

Actualització del firmware

1. Navigate to the Firmware Upgrade page via the Settings menu.
2. A red dot will appear to indicate that a new firmware version is available.
3. Click the red dot to start the upgrade process.
4. Follow the in-app instructions to complete the firmware upgrade.
5. Anker SOLIX F3800 Plus Portable Power Station and Home Power Panel must be connected to a stable Wi-Fi network.
6. Ensure the battery level othe f the Anker SOLIX F3800 Plus Portable Power Station is at least 5%.
7. The Anker SOLIX Generator Input Adapter must be connected to the Anker SOLIX F3800 Plus Portable Power Station to perform firmware updates.

Retard de transferència i retard d'inici

• Tenir un retard d'arrencada pot ser útil per evitar que el generador s'engegui durant un tall de corrent momentani.tages or brownouts.
• The start-up delay of the Anker SOLIX Generator Input Adapter is 2 seconds.
• However, it’s important to note the transfer delay, which is the time it takes for the power to switch from the utility to the generator.
• The transfer delay of the Anker SOLIX Generator Input Adapter is 50 ms.

Ús amb la central elèctrica portàtil Anker SOLIX F3800 Plus
When charging the Anker SOLIX F3800 Plus Portable Power Station with a generator, you can use the Anker SOLIX Generator Input Adapter.

Connecting with the Anker SOLIX F3800 Plus Portable Power Station and Generator

1. Apagueu el generador.
2. Connect the Anker SOLIX Generator Input Adapter with the Anker SOLIX F3800 Plus Portable Power Station via the Home Power Panel port.
3. Connect the Anker SOLIX Generator Input Adapter with the generator via the NEMA L14-30P port.
4. Turn on the generator. The status indicator of the Anker SOLIX Generator Input Adapter will be white if it works normally.
5. If the generator is 120V, you need to purchase a TT-30 to L14-30R adapter to connect with the Anker SOLIX Generator Input Adapter. Only the NEMA TT-30R port of the power station can be used.
6. After connecting the 240V Generator, one Anker SOLIX F3800 Plus recharges at a maximum power of 3,300W; if Anker.
7. SOLIX F3800 Plus is connected to expansion batteries, recharging power can be up to 6,000W.

Configuració de l'aplicació amb la central elèctrica portàtil Anker SOLIX F3800 Plus
Before using the Anker SOLIX Generator Input Adapter, please check and ensure that the firmware of the Anker SOLIX F3800 Plus Portable Power Station and the Anker SOLIX Generator Input Adapter have been updated to the latest version.

1. Keep a good quality Wi-Fi signal strength and do not place the power station too far away from the router.
2. Add Anker SOLIX F3800 Plus Portable Power Station in the app.
3. When using the Anker SOLIX Generator Input Adapter with the Anker SOLIX F3800 Plus Portable Power Station for the first time, set the generator’s running wattage i aigua de recàrrega màximatage a l'aplicació.
4. Otherwise, the generator will charge the power station with default values.
5. The generator can charge the Anker SOLIX F3800 Plus Portable Power Station while supplying power to the load. The maximum input of the power station is 3,000W (120V) or 6,000W (240V). It varies with the voltage.
6. The maximum pass-through charging power from a generator is 6,000W.

Disconnecting from the Anker SOLIX F3800 Plus Portable Power Station and the Generator
Apagar el generador directament pot causar una fallada de correnttage for several seconds. Please follow the steps below to avoid power disruptions.

1. Desconnecteu l'interruptor de corrent altern del generador.
2. Disconnect the Anker SOLIX Generator Input Adapter from the Anker SOLIX F3800 Plus Portable Power Station.

Ús amb el panell d'alimentació domèstica Anker SOLIX
When charging the Anker SOLIX Home Power Panel with a 240V generator, you can use the Anker SOLIX Generator Input Adapter. Connecting with the Anker SOLIX Home Power Panel and a 240V Generator.

Avís

• Anker SOLIX Generator Input Adapter cannot be used while the grid is operating. If the adapter is used, the status indicator will be red.
• Before connecting the Anker SOLIX Generator Input Adapter to the Anker SOLIX Home Power Panel, ensure that its firmware has been updated to the latest version.
• If it has not been updated yet, first connect the Anker SOLIX Generator Input.

Adapter to F3800 Plus Portable Power Station, then update the firmware of both the adapter and the power station to the latest version.

1. Turn off the 240V generator and the circuit breaker that controls the Home Power Panel port connected to the Anker SOLIX Generator Input Adapter.
2. Connect the Anker SOLIX Generator Input Adapter with the Anker SOLIX Home Power Panel via the Home Power Panel port.
3. Connect the Anker SOLIX Generator Input Adapter to the generator via the NEMA L14-30P port. If the generator’s output port is NEMA L14-50, purchase a NEMA L14-30R to L14-50P adapter to connect with the Anker SOLIX Generator Input Adapter.
4. Turn on the generator and circuit breaker. The status indicator of the Anker SOLIX Generator Input Adapter should be white, indicating normal operation.
5. When the Anker SOLIX Home Power Panel is connected to the Anker SOLIX F3800 Plus Portable Power Station and a 240V generator, excess generator power output can charge the power station.

Configuració de l'aplicació amb Anker SOLIX Home Power Panel
Before using the Anker SOLIX Generator Input Adapter, ensure the firmware of the Anker SOLIX Home Power Panel has been updated to the latest version.

1. Keep a good quality Wi-Fi signal strength and do not place the Home Power Panel too far away from the router.
2. Add the Anker SOLIX Home Power Panel in the app.
3. When using the Anker SOLIX Generator Input Adapter with the Anker SOLIX Home Power Panel for the first time, please set the generator running wattage a l'aplicació.
4. The maximum input of the Home Power Panel is 6,000W. If the running wattagSi la potència del generador supera els 6,000 W, el quadre elèctric de la llar funcionarà a 6,000 W.

Disconnecting from the Anker SOLIX Home Power Panel and a 240V Generator
Apagar el generador directament pot causar una fallada de correnttage for several seconds. Please follow the steps below to avoid power disruptions.

1. Turn off the circuit breaker connected to the Anker SOLIX Generator Input Adapter, located on the Home Power Panel.
2. Desconnecteu l'interruptor de corrent altern del generador.
3. Disconnect the Anker SOLIX Generator Input Adapter from the Home Power Panel.

Preguntes freqüents

Q1: Is the Anker SOLIX Generator Input Adapter compatible with the Anker SOLIX F3800 Portable Power Station?
No, the Anker SOLIX Generator Input Adapter can only work with the Anker SOLIX F3800 Plus Portable Power Station and the Anker SOLIX Home Power Panel.

Q2: How do I connect the Anker SOLIX Generator Input Adapter to the Anker SOLIX Home Power Panel?
Connect the Anker SOLIX Generator Input Adapter to any port at the bottom of the Home Power Panel. When there is a power outage, turn on the generator, and it will power the backup loads. If the Anker SOLIX F3800 Plus Portable Power Station is connected to another Home Power Panel port, the generator will also charge the power station.

Documents/Recursos

Adaptador d'entrada per a generador Anker SOLIX [pdfGuia de l'usuari Adaptador d'entrada de generador SOLIX, SOLIX, Adaptador d'entrada de generador, Adaptador d'entrada, Adaptador

Referències

• Manual d'usuari