BUILTBRIGHT BB6105B Strobe Link Configurator
INCLUDED
- lx LED light bar
- lx Wireless remote controller
- 2x Plastic mounting brackets
- 8x 6mm x 20 bolts
- 8x 6mm flat, lock washers and nuts
- 4x 6mm x 35 mounting bolts
- 4x 6mm flat, lock washers and nuts
INSTALLATION
The LED light bar is engineered to be mounted using the included mounting brackets and hardware for your specific type of installation. To ensure proper placement of your LED light bar it is recommended that you measure and mark your preferred location prior to installation or seek professional installation assistance.
WIRING
- Red-To +VDC——————— White-To +VDC
- Black -To chassis ground —————–
- Yellow -To select the flash pattern,use either the wireless remote control (refer to TABLE 2) or the yellow trigger wire (refer to WIRING). Connect the yellow wire to +VDC:
- < 1 second to choose the next pattern.
- 2-4 seconds to select the previous pattern.
- >5 seconds to clear the pairing address with the remote control.
PATTERN TYPE
REMOTE CONTROL
WIRELESS REMOTE CONTROLLER
WARRANTY
ARC Lighting provides a 5 year warranty against manufacturing defects from date of purchase. If warranty service is needed, please contact the authorized dealer of where your product(s) were originally purchased.
Customer Support:
Phone: (888)608-2220
- Email: support@arc.lighting
- Website: www.arc.lighting/warranty-claim
BUILTBRIGHT
BASTROP, TEXAS 78602
UNITED STATES OF AMERICA
WWW.BUILT-BRIGHT.COM
WARNING: CANCER
AND REPRODUCTIVE HARM
WWW.P65WARNINGS.CA.GOV
BUILT RIGHT & DESIGNED BRIGHT | BUILT-BRIGHT.COM
Documents / Resources
 |
BUILTBRIGHT BB6105B Strobe Link Configurator [pdf] Instructions BB6105B, 240827, BB6105B Strobe Link Configurator, BB6105B, Strobe Link Configurator, Link Configurator, Configurator |