BUILDING BLOCK 33400 Remote App Control User Guide

Product Information:
The XYZ-2000 is a high-quality electric kettle designed for fast and efficient boiling of water. With a power rating of 1200W, it can quickly heat up 1.5 liters of water in its stainless steel body. The compact dimensions of 10 x 12 x 8 inches make it suitable for both home and office use.

Product Usage Instructions

Initial Setup:
Before using the XYZ-2000 electric kettle for the first time, ensure that all packaging materials are removed and that the kettle is placed on a stable, flat surface near a power outlet.

Filling the Kettle:
Open the lid of the kettle by pressing the release button. Fill the kettle with water up to the desired level, making sure not to exceed the maximum capacity of 1.5 liters.

Boiling Water:
Close the lid securely and plug the kettle into a power source.
Press the power button to start the boiling process. The kettle will automatically turn off once the water reaches boiling point.

Pouring and Serving:
Once the water has boiled, carefully pour it out using the spout of the kettle. Use caution as the water will be hot. Serve the hot water as needed for beverages or cooking.

In line with the world’s popular children’s programming.9 education content, it connects with the Primary. school education and mal<es learning fun through P.ersonalized programming tasks. Achieve visual programming effects and make children fall in love with programming. Multi-mode parallelism, fast connection, interesting graphics programming, real-time command control, and unlimited creativity.

* Remote Control Pattern * Programming Model * building blocks

APP Installation

This product needs to be used with your mobile phone or tablet.

Supports mobile phones and tablets of los 10.0 and above, supports devices of iPhone 6 and above, screen size 4.7 and above, and supports devices of iPad and above.
Support Android 8.0 and above versions of the system’s tablet and mobile phone;

Screen size: 4.7 or more; front-end camera; 5 million or more pixels;

Note: The instructions contain important information. Please keep it properly. It will take some time for installation. Please wait patiently.

Activation code

For first-time use, please open the APP, watch a short animation and then enter the home page.

Open the APP, enter the homepage, and the “Power Box” icon will appear.

Note: It needs to be activated while connected to the Internet. It is recommended to use it in a WiFi environment.

Chinese-English switching

Please open the “Power Box” APP and enter the homepage

CONTROL FUNCTION

Swipe right on the interface to show more
Enter the function selection interface, click on the Remote icon, and enter the control function interface

Click the WIFI button on the remote control interface. The WIFI button will turn blue when the connection is successful.
Click the steering wheel to control the main controls.

Click the switch motor direction button, and switch the motor control direction .
Click the switch operation wheel direction button, Switch the left and right operation panels.
Click Convert Mode .

Other interfaces

Programming function

Enter the function selection interface and click the Program icon to enter the programming function interface.
Enter the programming list interface, click Add Programming, and enter the programming interface.
Enter the programming list interface, click Add Programming, and enter the programming interface.

If the WIFI icon shows no connection, click Connect first and then drag the programming module.

Product Summary

Smart creative module

Remote Control/Voice Remote Control

Method Of Operation

Tum on the power switch and indicator lights when staring.

NOTE:
Please turn off the power and use it outside It is forbidden to work for a long time .It will stop when working state is longer than 24 hours. You need to charge the Smart creative module.

Remote Control Operation

Remote control operation install the battry before using it, tum on the switch, the indicator li ht is on, and the link is successful.
AAA Battery 2

Direction button control: Front /back/left/right

Link Operation
First tum on the main control module switch, then install the remote control battery, tum on the switch, when the indicator light is on, the link is successful.

NOTE:
If the power is not turned on for a long time, repeat the installation of the remote battery connection.

Charging Operation

Use usb charging. Connect the main smart creative module and the computer usb port. When charging, the light is red; after charging, the light goes out. The charging time is 100 minutes. Please unplug the connector after charging.

NOTE:
The charing input voltage should not exceed SV and the current should not exceed lA.

Precautions Smart creative module is not removable and must not subject the product to mechanical shock;
Smart creative module contains batteries, away from heat sources and locations above 60 C;
Smart creative module cannot be charged for a long time to avoid danger;

The USB charging cable is an electronic component and cannot be used for play;
This product contains small parts and is prohibited for use by children under the age of three to avoid the risk of suffocation.

The remote control function keys vary with the product series.

FCC STATMENT

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception,which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

Consult the dealer or an experienced radio/TV technician for help.

The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction

Frequently Asked Questions

Q: Can I heat liquids other than water in the XYZ-2000 electric kettle?
A: It is recommended to only use the electric kettle for boiling water. Heating other liquids may damage the kettle and affect its performance.

Q: How do I clean the XYZ-2000 electric kettle?
A: To clean the kettle, unplug it and allow it to cool down. Wipe the exterior with a damp cloth and use a mild detergent to clean the interior if needed. Do not immerse the kettle in water.

Documents / Resources

BUILDING BLOCK 33400 Remote App Control [pdf] User Guide
33400, 2BLBH-33400, BLBH33400, 33400 Remote App Control, 33400, Remote App Control, App Control

References

User Manual

BUILDING BLOCK 33400 Remote App Control