Specifications
- Model: YW/YD/YG4418M2
- Maximum Range: 50m
- Supported Voltage:
- 240 VAC – 150 W
- 110 VAC – 75 W
- Compatible with:
- Incandescent or halogen lamps
- Dimmable LED lamps, electronic transformers, ferromagnetic transformers, compact fluorescent lamps
Description
- Control pushbutton
- Notification LED
- Factory reset pushbutton: press and hold down the red LED turns on
- Connection clamps
= controlLed phase- B = pushbutton input
Electric diagrams
- Basic diagram
- Diagram with non-backlit remote control pushbuttons (Max 20)
Switch the power supply OFF before any work on the system.- Remote operation may cause damage to people or property
- Protect a with ≤a 10 A thermal magnetic circuit breaker
Mounting
Disassembling
Technical features
|
• Carichi |
Lampada incandescente o lampada alogena | Lampada a LED DIMMERABILE (*), |
| 240 VAC | 150 W | 150 VA |
| 110 VAC | 75 W | 75 VA |
|
• Loads |
Filament lamp or halogen lamp | DIMMER LED lamp (*), |
| 240 VAC | 150 W | 150 VA |
| 110 VAC | 75 W | 75 VA |
|
• Charges |
Ampoule à incandescence ou lampe halogène | Ampoule à LED AVEC VARIATEUR (*), |
| 240 VAC | 150 W | 150 VA |
| 110 VAC | 75 W | 75 VA |
|
• Stromlasten |
Glühlampe oder Halogenlampe | Dimmbare LED-Lampen (*), |
| 240 VAC | 150 W | 150 VA |
| 110 VAC | 75 W | 75 VA |
|
• Cargas |
Bombilla incandescente o bombilla halógena | Lámpara LED REGULABLE (*) | ||
| 240 VCA | 150 W | 150 VA | ||
| 110 VCA | 75 W | 75 VA | ||
|
• Ladingen |
|
DIMBARE LEDlamp (*). | ||
| 240 VAC | 150 W | 150 VA | ||
| 110 VAC | 75 W | 75 VA | ||
|
• Cargas |
Lâmpada de LED COM VARIADOR DIMMER (*), Transformadores eletrónicos com variador dimmer, Transformadores ferromagnéticos com variador dimmer (**), Fluoresc entes compactas com variador dimmer | |||
| 240 VCA | 150 W | 150 VA | ||
| 110 VCA | 75 W | 75 VA | ||
- (*) For good lighting comfort, we recommend the use of lamps of the same type and from the same supplier. Maximum 15 lamps.
- (**) Use only in “Leading edge” mode
Settings
- Led colour legend
- Led status legend
Note: Exit Settings mode automatically if no action is taken for 2 minutes.
Adjustment of lighting thresholds – 
Green LED
Lighting setting Max.
Lighting setting Min.
Save/Exit settings mode
- Led off/Led on/Locator/Indicator mode –
Blue LED - LED off mode
- LED on mode
- Locator mode
- Indicator mode
- Save/Exit settings mode
- Lighting state memory function – Orange LED
- Function enabled
- Function disabled
- Save/Exit settings mode
- Trailing / Leading mode – Pink LED
- Trailing – * Capacitive loads – Default value
- Leading – Inductive loads
- Save/Exit settings mode
Warning: Loads with ferromagnetic transformers must only be used in “leading” mode. Risk ofthe product breaking.
Documents / Resources
 |
bticino YG4418M2 Universal Pushbutton Dimmer [pdf] Installation Guide YW4418M2, YD4418M2, YG4418M2, YG4418M2 Universal Pushbutton Dimmer, Universal Pushbutton Dimmer, Pushbutton Dimmer, Dimmer |