BSP D9 Wireless Controller User Manual

Wireless controller manual

Schematic diagram of function buttons

Applicable instructions

1. This product adopts an ergonomic design and has a comfortable touch.
2. Equipped with stretching and shrinking functions, it can stretch and store mobile phones with different lengths of 130- 280 mm.
3. Using Bluetooth 5.2 EDR/BLE connection, the handle is connected to various hosts such as mobile phones through Bluetooth.
4. Supports the ShootingPlus app, which can be downloaded from various mobile application markets.
5. Supports Android and Hongmeng HID standard modes, and can play various game hall games that support HID standard modes.
6. Supports Android 6.0 or higher systems (i.e., Shooting Plus Android mode).
7. Supports MFi games for iOS 13.0 and above systems, and MFi games can be downloaded from the Shan Wan MFi app.
8. Supports PS3/PS4/SWITCH game console Bluetooth connection to play games, and has a gyroscope function.
9. Supports Bluetooth connectivity for Windows 10 laptops and plays X-Input games.
10.  Supports USB cable and can play PC/PS3/SWITCH games.
11. The controller can be firmware upgraded, and additional feature modifications and settings can be made by downloading and installing the GamepadSpace app on the phone
    ★Due to phone system issues, some phones may not support this device
    ★Due to uncontrollable factors such as software upgrades or source code changes on the official game platform, some games cannot be connected and operated with this product. Our company is not responsible for any of the consequences. Our company reserves the final right of interpretation regarding this matter.

Product characteristic parameters

1. Working voltage: DC3.7V
2. Working current: approximately 10mA
3. Continuous use time: 20H
4. Sleep current: SuA
5. Charging voltage/current: DC5V/500mA
6. Bluetooth transmission distance: 8 m
7. Battery capacity: 400mAh
8. Standby time: 60 days when fully charged

When using this product, please keep the device placed horizontally, ensure that the camera is on the left, and restore the game’s key positions to their default settings.

Product Instructions

Android Shooting Plus mode (Harmony OS system and Android ShootingPlus mode are the same):
Press “A HOME” for 2 seconds to enter V3 Android mode, and the status indicator light on the controller will flash. When the Android phone searches for the device name “BSP-D9”, select “Connect”. After a successful connection, the status indicator light on the controller remains red.
Successfully connected, you can directly press HOME, the status indicator light will flash slowly and automatically reconnect.

Android/Harmony OS/iOS key mapping function:
Follow the official account “ShootingPlus” and view the default operating instructions in the official account. If you need to see the mapping keys, please download and install the “Shooting Plus” APP, map the keys, and adjust the key positions in the APP. Shooting Plus App for Android and Hong Kong systems can be downloaded from various mobile application markets.

https://qixiongfiles.cn/app/V5Download.html

Android Standard Mode:

1. Press “X+HOME for 2 seconds to enter the standard Android mode, and the status indicator will flash quickly. When the Android/Harmony phone searches for the device name “BSP-D9”, select Connect. After successful connection, the status indicator on the handle will stay on in orange. Successfully connected, you can directly press “HOME”, the status indicator flashes slowly, and automatically connect back.
2. In Android/Harmony OS standard mode, you can download various game halls and enter the platform to download the required games

¡OS MFi Mode:
Press “B+HOME’for 2 seconds to enter iOS MFi mode, and the status indicator will flash quickly. When the Apple phone searches for the device name “DUALSHOCK 4 Wireless Controller”, select Connect. After successful connection, the status indicator on the handle will always be purple.
Successfully connected, you can directly press “HOME”, the status indicator flashes slowly, and automatically connect back.MFI games can be downloaded from the ShanWan MFi app

PC X-input Bluetooth mode:
At the same time, press “R1+HOME’for 2 seconds to enter the computer Bluetooth mode. The status indicator flashes quickly. Open the computer, find the Bluetooth device to add, click Search, and when the device name “Xbox Wireless Controller” is found, select Connect. After successful connection, the status indicator will remain on in cyan.
Successfully connected, you can directly press “HOME”, the status indicator flashes slowly. and automatically reconnect.

SWITCH mode:
On the SWITCH host, select Controller->Change Grip/Order to enter the SWITCH host pairing mode interface. Press L+R on the controller. Simultaneously press “R2+HOME” for 2 seconds to enter the SWITCH mode for pairing, and the status indicator will flash. If the pairing is successful, the status indicator will remain green
If successfully connected, you can directly press “HOME”; the status indicator flashes slowly. and automatically reconnect.

PS3/PS4 mode:
Connect the handle directly to the PS3/PS4 host using a TYPE-C USB data cable, press HOME to pair, and after successful pairing, the status indicator will remain on in blue. Successfully connected, you can directly press “HOME”, the status indicator flashes slowly, and automatically connect back.
PC 2.4G computer receiver mode:
Simultaneously press “L1+HOME” for 2 seconds to enter computer mode; the status indicator flashes quickly, indicating PC connection mode. The computer receiver is plugged into the computer. After successful connection, the status indicator will remain on in cyan. Successfully connected, you can directly press “HOME”, the status indicator flashes slowly, and automatically connect back.

Wired mode:

1. Automatic recognition of various system platforms in wired mode, supported by Android, PC (D-input and X-Input), PS3, and Switch.
2. On a PC, pressing the “HOME” key for 2 seconds can switch between PC/PS3 mode and XBOX360 mode.
3. On iOS 16.0 and above systems, it is supported to hold down the “SELECT” button and then insert a USB to connect to an OS computer, OS phone, or iOS tablet. In iOS wired mode.

Motor vibration force adjustment

Pressing and holding the TURBO+right joystick up and down can enhance and weaken the motor vibration force

TURBO settings

Press “A” and then “T” to activate Turbo burst
Press “A” for the second time and then “T”, the “A” button will automatically send consecutive messages
Press “A” for the third time and then “T” to turn off the burst (restore to its original state)
When the “A” button is in AUTO mode, press and hold the “TURBO+left joystick up and down” button to set the speed of the automatic burst, which is 15 beats per second, 25 beats per second, and 8 beats per second, respectively. (Note: The setting method for other function keys is the same as above)

Axis calibration function

Place the handle flat on the desktop, while holding down the ‘START+HOME button, wait for the status indicator to remain on, then release. After calibration is completed, the status indicator will turn off.

Strong sense of body opening

1. Press and hold the “T” button for eight seconds, and if the motor vibrates, switch to the simulated right joystick.
2. When the six-axis has been switched to the right joystick, lightly press T to enter the semi-open state of the gyroscope. The main use scenario is to assist in shooting and aiming when pressing 12 to open the mirror in FPS games.
3. Press and hold the “T” button again for eight seconds, and if the motor vibrates, switch to the simulated left joystick
4. Press and hold the “T” button again for eight seconds, and if the motor vibrates, it will be cancelled.

ABXY key value exchange function

Press and hold the handle “Y”+”A+”HOME”, and the ABXY key values can be interchanged according to the PC layout key value and the Switch layout key value.

Macro programming

【Back Macro Extension Settings】

1. Press and hold the “SELECT” button on the handle, then press M1, and the status Indicator will flash quickly. This is the setting modo
   The M2 setting method is the same as above
2. After the setting mode is turned on, the status indicator will flash quickly. At this time, you can set the button, and the key that the handle presses will be recorded on the M1 button. For example, press the A key once, and A will be entered on M1. This button is for example: other key positions can also be entered
3. To set multiple buttons: press A once, then B, then X, and then Y, so that the order of using M1 to attack is ABXY. [This button is set to list: other attack sequences can be set to 12 ABXY/up, down, left, nght/L/ZL/R/ZR]
4. After pressing the button, press M1 again to complete the programming, and the status Indicator remains on

【Back macro clear button】
At the same time, press and hold the “SELECT”+”M1” keys on the handle to enter programming mode. At this time, the HOME key light flashes quickly. Do not type any key values at this time. Press the “M1” key again to eliminate the key values set before the M1 key.

Handle charging/hibernation/wake-up function

1. Handle charging function:
   A. When the battery is low, the charging indicator light flashes red;
   B. When charging, the charging Indicator light flashes yellow;
   C. When fully charged, the charging indicator light is green and always on
2. Handle sleep/wake up/shutdown function:
   A. The handle automatically shuts down and sleeps when there are no button operations within 5 minutes
   B. When you need to use it again, you need to press the “HOME” key to wake up and reconnect;
   C. In the power-on state, press and hold the “HOME” button for 8 seconds to shut down the product and turn off all LED indicators.

Operation and usage mode

Bluetooth mode:

Applicable system	Android/Harmony OS		IOS system
Working mode	Shooting Plus V3	Android Standard Mode	ICS MFI mode
Mode pairing 12 seconds long)	A+HOME	X+HOME	B+HOME
Status indicator	Red	Orange	Purple
notes	Play games downloaded from the Android Market	Play Android HID Game Hall	Play the MFi game ShanWan MFI App for download

Computer receiver and data cable mode:

Applicable system	Computer/PC/Bluetooth	PC 2.4G	PS3/PS4/PS5	Switch
Mode pairing (2 seconds long)	RB-HOME	LB+HOME	Plug in USB data cable	R2+HOME or Plug in USB
Status Indicator	Cyan	Cyan	Blue	Green
notes	Play X-input games	Play X-input and D-Input games	Play PS3/PS4 games	Playing Switch Games

Computers need an optional computer receiver

Precautions

1. Do not store the product in wet or hot places,
2. Do not hit, bat, pierce, or attempt to break down the product to avoid unnecessary damage to it
3. The product has built-in batteries; do not throw them away with garbage:
4. Do not charge the handle near fire or other heat sources;
5. Non-professionals should not disassemble this product; otherwise, it is not covered by the after-sales warranty service.

Product List