BSEED EA9 Smart Plug User Guide

Scan the QR code provided in the manual or search for Smart
Life in the APP store.
Download and install the Smart Life APP.
Open the Smart Life APP to proceed with device connection.

Add Device

Network Pairing Method

There are two network pairing methods available:

Automatic Discovery:
1. Enable BLE, WiFi, and location permissions on your device.
2. Open the Smart Life APP and log in or register an account.
3. Press and hold the main switch button on the device until it
  flashes red.
4. Select the device to add and click ‘Add.’
5. Enter your WiFi name and password, then click ‘Next.’
6. Tap the ‘+’ on the APP homepage to add the device.
7. Wait for successful pairing confirmation and proceed to device
  operation.
AP Network Pairing:
1. Enable BLE, WiFi, and location permissions on your device.
2. Open the Smart Life APP and log in or register an account.
3. Press and hold the main switch button on the device until it
  flashes red.
4. Tap the ‘+’ on the APP homepage to add the device and click the
  corresponding icon.

Frequently Asked Questions (FAQ)

Q: How do I know if the Smart WiFi Plug is connected to the
network?

A: The red light flashes during network distribution, the blue
light stays continuously on when connected to the network, and the
light is off when in low-power mode.

Q: What should I do if the indicator light is not on?

A: If the device has not been paired to the network for 10
minutes, it enters low power mode. Set it on the app for the
indicator light to be normally on.

Q: Can I control connected devices using Amazon Alexa or Google
Assistant?

A: Yes, you can operate Alexa and Google Assistant to control
connected devices.

“`

View Fullscreen

Smart Plug EA9 User Guide

Catalog
Reference 01
Product Introduction 02
Parameters 04
Installation of Smart Life APP 04
Add Device 05
Functions 09
Share Smart Plug EA9 10
Connecting Amazon Alexa 13
Intelligent Scene Linkage 14
Safety Information 15
Please read the instruction manual carefully before using this product.

Reference
This guide applies to the Smart Plug EA9.
· Smart Plug EA9: Independent control of the
power switch, can be used to manage appliances in the kitchen, home appliances remote control, etc.By setting the boot time, through the power metering, remote control andother functions, greatly enhance the convenience and safety of family life,but also help users better manage energy consumption and save costs.
· Quick pairing WiFi and indicator pairing flashing · Voice Control: Use simple voice commands to
operate Alexa and Google Assistant to control connected devices.
· Timing: Create a countdown, timer, cycle timer,
random timer, and tap switch for connected devices.
· Safety Guarantee: Built-in overheat protection,
combined with flame retardant housing and rugged construction, keeps you and your equipment safe.
01

Product Introduction

Switch Button

Type-A Type-C1 Type-C2

· Button Description
Switch button: 1.Short press once to switch on the Smart Plug. 2.Long press (5 sec) to enter the distribution
mode, red indicator light flashes.
02

· Indicator light color description
Red light: Light flashes indicating the status of distribution network. Blue light: Light continuously on indicating the Smart WiFi Plug connect with network and is energized. Off light: Light is off indicate that it is in the process of being distributed Off lightLight is off indicate that the device is in low-power mode and is powered on.
Notes: The device has not been paired to the network
for 10 minutes, and enters the low power mode. Set on app to indicator light normally on.
Tip: The illustrations of products, accessories, user interface, etc.in the manual are schematic diagrams for reference only. Due to product updates and upgrades, there may be slight differences between the actual product and the schematic, please refer to the actual product.
03

Parameters
Model: EA9 Working Temperature: -5–35 Wireless Type: 2.4GHz 802.11b/g/n Frequency Range: 24002483.5 MHz Wi-Fi/Bluetooth Max. Transmitting Power: 20 dBm Ratings: 230 V~ 50Hz 16A MAX 3680 W Type-C1/Type-C2 Single Port Output: 5 V 3 A,9 V 3 A,12 V 2.5 A,15 V 2 A,20 V 1.5 A Type-A Single Port Output: 5 V 3 A,9 V 3 A,12 V 2.5 A Type-A + Type-C Multi-Port Output: 5 V 3 A Compatible with Android 5.0 & iOS 9.0 or above
Installation of Smart Life APP
Scan the QR code below or search for “Smart Life”in the APP store to download and install the Smart Life APP will be directed to the device connection page.
04

Add Device
Network Pairing Method
1. Automatic discovery of network pairing network. Enable BLE, WiFi and location permission (WiFi
needs to be connected 2.4GHz).
Open Smart Life APP and log in your account, please register an account first if you don’t have one.
Press and hold the main switch button of the device so that the device flashes red to enter the network pairing mode.

Discover the device to be added and then click “Add”
Connect to WiFi and enter the WiFi name and corresponding password of WiFi, then click “Next”.

Tap “+” in the upper right corner of the APP homepage to enter the Add Device Page.

Wait for network pairing until prompted “Added successfully”, then click “Done”, enter the device operation interface.

2. AP Network Pairing Enable BLE, WiFi and location permission
( WiFi needs to be connected 2.4GHz). Open Smart Life APP and log in your account,
please register a account first if you don’t have one. Press and hold the main switch button of the device so that the device flashes red to enter the network pairing mode. Tap “+” in the upper right corner of the APP homepage to enter the Add Device Page and click the corresponding icon.
07

Connect to WiFi and enter the WiFi name and corresponding password of WiFi, then click “Next”.
The interface pops up a prompt box , then clicks on the “Blink Slowly”.
Connect to the WiFi emitted by the device (WiFi name starts with Smart Life).
08

After the connection is completed, return to the Smart Life APP and wait for the phone successfully add the device to enter the device operation interface.
Functions
Mobile Phone Remote Control: mobile phone APP remote control intelligent switch. Countdown: Set the countdown time, and turn the device on or off after the countdown ends. Timing: Set a user-defined time to enable or disable the device. You can customize multiple groups and support weekly cycle. Round Robin Timing: Set a total period of time in which the enable and disable time ranges can be set. The time ranges are enabled and disabled.
09

Random Timing: Set a start time and an end time, supporting a weekly cycle. After the start time is reached, a random timing time is set. Click Switch: After this function is enabled, the device automatically shuts down after running for a period of time. Voice Control: Support Amazon Alexa, Google Assistant voice control functions. Power ConsumptionIt can display today’s power consumption, current, power consumption, voltage and total power consumptionData can be stored for one year. Clearing Battery Data: The battery data can be cleared. After the data is cleared, the historical data cannot be viewed. Power-on Status: Power off, power on, keep the status before power off. Child Lock Switch: After opening the child lock, press the main button 4 times to temporarily release 10 seconds.
10

Share Smart Plug EA9
You can invite your family members to manage your devices together by entering the Smart Plug EA9 ID of the device you want to share. Method 1 1. Open the Smart Life
App to select the shared device.
2. Click the edit button on the main screen of the device.
11

3. Go to the editing screen and then click “Share Device”.
4. Click to share Smart Life account and enter the corresponding ID.
Method 2 1. Open the Smart Life APP 2. Go to the “Me” screen
and click on home management.
12

3. Select the My home to which you want to add members.

My home ..

4. Click add member to bring up the invitation methods dialog box and then select one of the methods to invite the corres ponding person.

Connecting Amazon Alexa

Download Alexa APP and register an account.

Add equipment: Add Smart Plug EA9 in Smart Life APP.

Bound Speaker: Open Smart Life APP and click “My” interface, in the Voice Third-party services, select Alexa and click login to bind.

Binding Success: Devices can be controlled by

voice commands.

Intelligent Scene Linkage
The product can be linked with EA9 by creating Smart Scenes through the Smart Life APP. Smart Scene Linkage ExampleSetting conditions Sunrise or Sunset. 1. After clicking add “Automation”, you will be
taken to the ” Create Scenario” guild page. 2. First set up a scene trigger conditions, here
choose the “Climate Change”. 3. In the “Climate Change”, you need to select
another detailed condition,here you select Sunrise and Sunset and click “Next”. 4. In Sunrise or Sunset, you can also select the time period before and after the sunrise or sunset, select the current city and click “Next”. 5. Execution conditions can be selected to control a single device, or you can choose to send a notification reminder, after selecting click “Next” to save, enter the scene name and click “Confirm”. 6. After setting the conditions, it will automatically jump to the page of setting tasks.
14

For more linkage functions, you can click “+”in the upper right corner of the App’s “Scene” page, based on the time scenario, select the device as the trigger condition, or execute the action, and create smart linkage scenarios on your own.
Safety Information
· Keep it Out of the Reach of Children and Pets. · Do Not use this Product in Humid Environments
or Outdoors. It’s for Indoor use Only.
· Do Not Place this Product Near Heating Devices,
Such as Microwave Ovens, or Radiators.
· Protect the Product from Extreme Temperatures
Direct Sunlight, Strong Jolts High Humidity, Moisture, Flammable Gases, Vapors and Solvents.
· Do Not Disassemble Modify, or Repair your
Device.and Ask Help From the Authorized Professionals for Device Malfunction.
· Do Not use the Device when it is No Longer
Working Properly or Visibly Damaged.
· Do Not Store the Device for Extended Periods in
Poor Ambient Conditions. 15

· Do not connect appliances to this remote
controlled socket-outlet if the instruction manual of the appliances prohibits being remote controlled (for example appliances according to EN 60335-2-9 like grills, toasters and similar portable cooking appliances, or portable kitchen appliances, or appliances with heating elements like ovens or heaters, etc.).
· Do not connect any appliances to this remote
controlled socket-outlet which are radiating heat and may cause ignition or burning of surrounding materials (for example radiation heaters, portable heaters, portable floodlights, desk lamps, etc.).
· Take into consideration that connected
appliances might be moved by pets, cleaning staff or other persons who are not aware of the remote control functions.
· Do not connect any appliances with potential
hazards by moving parts (for example drills, table saws,blenders, etc.).
· Do not cover when in use.
(· Nicht abgedeckt betreiben. )
· Only voltage free if the plug is pulled.
(· Spannungsfrei nur bei gezogenemtecker. )
· Do not connect in series.
( ·Nicht hintereinander stecken.)
16

· Never use Aggressive Detergents Such as
Rubbing Alcohol or Other Chemical Solutions Because these Could Damaae the Casing or Even Impair the Functioning of the Product.
Note: The Image Shown in the Manual is Indicative Only. If There is Inconsistency Between the Image and the Actual Product, the Actual Product Shall Govern.
WEEE Disposal and Recycling Information
All Products Bearing This Symbol are Waste Electrical and Electronic Equipment (WEEE as in Directive 2012/19/EU) Which Should Not be Mixed with Unsorted Household Waste. Instead, Vou Should Protect Human Health and the Environment by Handing Over your Waste Equipment to a Designated Vollection Point for the Recvcling of Waste Electrical and Electronic
Equipment Appointed by the Government or Local Authorities. Correct Disposal and Recycling will Help Prevent Potential Negative Consequences to the Environment and Human Health. Please Contact the Installer or Local Authorities for More Information About the Location as Well as Terms and Conditions of Such Collection Points.
17

Hereby, We declares that the radio equipment type EA9 is compliant with Directive 2014/53/EU.
The full text of the EU declaration of conformity is available at the following internet address: https://www.dgorient.com/downloads.html

MADE IN CHINA 18

Documents / Resources

BSEED EA9 Smart Plug [pdf] User Guide
EA9 Smart Plug, EA9, Smart Plug, Smart Plug, Smart, Plug

References

User Manual

BSEED EA9 Smart Plug User Guide

EA9 Smart Plug

Specifications

Product Usage Instructions

Installation of Smart Life APP