DTAPE DT50 Uputstvo za upotrebu laserskog mjernog alata

1. Uvod

This manual provides detailed instructions for the safe and effective operation of your DTAPE DT50 Laser Measuring Tool. Please read this manual thoroughly before using the device to ensure proper functionality and to prevent damage or injury. The DTAPE DT50 is designed for high-accuracy distance, area, and volume measurements in various environments.

2. Sigurnosne informacije

UPOZORENJE: Lasersko zračenje

This device emits Class 2 laser radiation. Do not stare into the laser beam. Avoid direct eye exposure. Do not aim the laser beam at people or animals. Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure.

• Ne pokušavajte modificirati ili rastaviti uređaj.
• Držite uređaj van domašaja djece.
• Ne koristite uređaj u eksplozivnim okruženjima ili u blizini zapaljivih materijala.
• Uvjerite se da je pretinac za baterije sigurno zatvoren tokom rada.

3. Sadržaj paketa

Provjerite da li se u vašem paketu nalaze sve dolje navedene stavke:

• 1x DTAPE DT50 Laser Measuring Tool
• 2x AAA baterije
• 1x torbica za nošenje
• 1x remen za zapešće
• 1x uputstvo za upotrebu

Image: Contents of the DTAPE DT50 package, including the device, batteries, carrying pouch, and wrist strap.

4. Proizvod je gotovview

The DTAPE DT50 is a compact and robust laser distance meter designed for precise measurements. It features a backlit LCD display and intuitive button layout.

Slika: Front view of the DTAPE DT50, showing the LCD screen and control buttons.

Ključne karakteristike:

• visoka preciznost: Delivers ±1/16 inch accuracy.
• Raspon mjerenja: Measures distances up to 165 ft (50m).
• LCD ekran sa pozadinskim osvetljenjem: Za lakše čitanje u uslovima slabog osvjetljenja.
• Više jedinica: Easily switch between inches, feet, and meters.
• Više funkcija: Calculates area, distance, volume, and supports Pythagorean mode.
• Memorija podataka: Stores up to 20 groups of data.
• Robustan dizajn: IP54 dust/water resistance with an anti-slip rubber body.

Slika: Sa strane view of the DTAPE DT50, illustrating its compact dimensions (115mm length, 50mm width, 29mm height) and highlighting the 2-inch backlit screen and IP54 rating.

5. Podešavanje

5.1. Instalacija baterije

The DTAPE DT50 requires 2 AAA batteries (included). To install the batteries:

1. Pronađite poklopac odjeljka za bateriju na stražnjoj strani uređaja.
2. Otvorite poklopac.
3. Umetnite 2 AAA baterije, pazeći na ispravan polaritet (+/-).
4. Čvrsto zatvorite poklopac odeljka za baterije.

5.2. Uključivanje/isključivanje

• Za uključivanje: Pritisnite dugme Snaga button (central button with power symbol).
• Za isključivanje: Pritisnite i držite Snaga button for a few seconds. The device will also automatically power off after 150 seconds of inactivity to conserve battery.

6. Uputstvo za upotrebu

6.1. Osnovno mjerenje

1. Uključite uređaj.
2. Point the laser at the target object.
3. Pritisnite Mjera button (top arrow button) once to activate the laser.
4. Pritisnite Mjera ponovo pritisnite dugme da biste izvršili mjerenje. Rezultat će biti prikazan na ekranu.

Image: The DTAPE DT50 emitting a laser beam to measure a distance, demonstrating its high accuracy capability.

6.2. Promjena mjernih jedinica

To cycle through measurement units (meters, feet, inches, feet+inches):

• Pritisnite JEDINICA button (bottom left) repeatedly until your desired unit is displayed.

Image: The DTAPE DT50 display showing measurement results in meters, feet, and feet+inches, illustrating its multi-unit support.

6.3. Changing Measurement Reference Point

The device can measure from its front or rear edge. This is indicated by an icon on the display.

• Pritisnite Referentna tačka button (top right, next to the speaker icon) to switch between front and rear reference points.

6.4. Mute Mode

To mute the device's sounds:

• Pritisnite Mute button (speaker icon) to toggle sound on/off.

7. Načini mjerenja

The DTAPE DT50 supports various measurement functions:

• Jednostruko mjerenje udaljenosti: Standard point-to-point measurement.
• Kontinuirano mjerenje: Displays real-time distance as you move the device.
• Mjerenje površine: Izračunava površinu pravougaonog prostora.
• Mjerenje zapremine: Calculates the volume of a cubic space.
• Pythagorean Measurement (3-point): Calculates indirect distances using the Pythagorean theorem.
• Sabiranje/Oduzimanje: Dodajte ili oduzmite mjere.

7.1. Odabir načina mjerenja

To select a measurement mode:

• Pritisnite Funkcija button (grid icon, bottom left) repeatedly to cycle through the available modes. The icon for the selected mode will appear on the display.

Image: Visual representation of different measurement modes, including distance, volume, and Pythagorean calculations, showing how the device is used in various scenarios.

8. Upravljanje podacima

8.1. ViewPohranjeni podaci

The DTAPE DT50 can store up to 20 groups of measurement data.

• Pritisnite Memorija button (top left, with stacked lines icon) to view istorijski zapisi.
• Use the arrow buttons to navigate through the stored measurements.

Image: The DTAPE DT50 display showing multiple historical measurement records, demonstrating its data storage capability.

8.2. Brisanje podataka

To clear the current measurement or exit a mode:

• Pritisnite Clear/Off button (C button) to clear the last measurement or return to the previous screen.

9. Održavanje

• Očistite uređaj mekom, damp tkanina. Nemojte koristiti abrazivna sredstva za čišćenje ili rastvarače.
• Do not immerse the device in water, despite its water resistance.
• Uređaj čuvajte u torbici za nošenje kada se ne koristi kako biste ga zaštitili od prašine i udaraca.
• Izvadite baterije ako uređaj nećete koristiti duži period kako biste spriječili curenje.

10. Otkrivanje problema

11. Specifikacije

12. Garancija i podrška

Your DTAPE DT50 Laser Measuring Tool comes with a 24-month warranty from the date of purchase. This warranty covers manufacturing defects and ensures the product meets its specified performance standards under normal use.

For warranty claims, technical support, or any inquiries regarding your device, please contact DTAPE customer service through the following channels:

• Refer to the contact information provided on the product packaging or the official DTAPE website.
• Posjetite DTAPE Store on Amazon za dodatne resurse i podršku.

Molimo sačuvajte račun kao dokaz o kupovini radi provjere garancije.