Lenz rcB 1200

Lenz litijumski paket rcB 1200 Uputstvo za upotrebu

Model: rcB 1200

Uvod

This manual provides essential information for the safe and effective use of your Lenz Lithium Pack rcB 1200. Please read it thoroughly before operating the device and retain it for future reference.

The Lenz Lithium Pack rcB 1200 is a lightweight, rechargeable battery pack designed to power various Lenz heated products, including socks, vests, bandages, and gloves. It offers adjustable heat settings and can be controlled via the pack itself or remotely using a smartphone via Bluetooth.

Sadržaj paketa

Sigurnosna uputstva

Uvijek se pridržavajte sljedećih sigurnosnih mjera opreza kako biste spriječili ozljede ili oštećenje uređaja:

Setup

Punjenje baterija

Before first use, fully charge both Lithium Pack rcB 1200 battery packs.

  1. Connect the USB charging cable to the global USB-charger.
  2. Plug the USB-charger into a standard electrical outlet (100-240 VAC).
  3. Connect the charging cable to the charging port on each Lithium Pack rcB 1200. The charging port is typically located on the side or bottom of the pack.
  4. The charging indicator on the USB cable will show the charging status. A full charge typically takes several hours.
  5. Once fully charged, disconnect the battery packs from the charger.
Lenz Lithium Pack rcB 1200 battery packs and charging cable

Image: Two Lenz Lithium Pack rcB 1200 battery packs. One pack shows the power button and heat level indicators. The other pack shows the snap connectors. Below, a battery pack is shown connected to a charging cable.

Attaching to Heated Products

The Lithium Pack rcB 1200 attaches to compatible Lenz heated products using press studs.

  1. Locate the press studs on your Lenz heated socks, vest, bandage, or gloves.
  2. Align the press studs on the battery pack with those on the heated product.
  3. Firmly press the battery pack onto the product until the studs click into place, ensuring a secure connection.

Uputstvo za upotrebu

Powering On/Off and Adjusting Heat Levels (Manual Control)

Each battery pack has a power button and indicators for heat levels.

  1. Za uključivanje: Press and hold the power button (usually marked with a 'G' or power symbol) on the battery pack for a few seconds until the indicator lights illuminate.
  2. Za podešavanje nivoa toplote: Briefly press the power button to cycle through the three available heat settings. The indicator lights (1, 2, 3) will show the current heat level.
    • Level 1: Lowest heat setting.
    • Level 2: Medium heat setting.
    • Level 3: Highest heat setting.
  3. Za isključivanje: Press and hold the power button again for a few seconds until all indicator lights turn off.

Smartphone Control (Bluetooth Smart Ready)

The Lithium Pack rcB 1200 can be controlled remotely via a smartphone application.

  1. Download the official Lenz Heat App from your smartphone's app store (iOS or Android).
  2. Provjerite je li Bluetooth omogućen na vašem pametnom telefonu.
  3. Open the Lenz Heat App and follow the on-screen instructions to pair your Lithium Pack rcB 1200 battery packs. The app will guide you through the pairing process.
  4. Once paired, you can use the app to power the packs on/off, adjust heat levels, and monitor battery status.

Održavanje

Čišćenje

To clean the battery packs, gently wipe them with a damp cloth. Do not use harsh chemicals or abrasive cleaners. Ensure the packs are completely dry before storing or recharging.

Skladištenje

When storing the battery packs for extended periods, ensure they are charged to approximately 50-70% capacity. Store them in a cool, dry place away from direct sunlight and extreme temperatures. Recharge them every 3-6 months to maintain battery health.

Rješavanje problema

ProblemMogući uzrokRješenje
Battery pack not turning on.Baterija je prazna.U potpunosti napunite bateriju.
Baterija se ne puni.Charger or cable faulty; improper connection.Ensure charger and cable are properly connected. Try a different USB port or outlet. Verify charger is functional.
Heated product not heating.Battery pack not securely attached; battery pack not powered on; battery pack depleted.Ensure battery pack is securely attached via press studs. Power on the battery pack. Charge the battery pack.
Nije moguće povezivanje putem Bluetootha.Bluetooth not enabled on phone; battery pack not in pairing mode; app issue.Ensure Bluetooth is on. Restart battery pack and phone. Reinstall Lenz Heat App. Follow app pairing instructions carefully.

Specifikacije

Garancija i podrška

For warranty information and technical support, please refer to the official Lenz webweb-mjesto ili direktno kontaktirajte njihovu korisničku službu. Sačuvajte dokaz o kupovini za slučaj reklamacije.

Proizvođač: Lenz

Webstranica: www.lenzproducts.com (Npramplink, stvarni link se može razlikovati)

Povezani dokumenti - rcB 1200

Preview LENZ litijumska baterija rcB 1400 / rcB 2000 Sistem za grijanje tijela - uputstvo za upotrebu i sigurnosne upute
Sveobuhvatne sigurnosne mjere i upute za upotrebu za LENZ litijumsku bateriju rcB 1400 i rcB 2000 sistem za grijanje tijela. Saznajte više o punjenju, upotrebi, sigurnosnim značajkama i održavanju za optimalne performanse.
Preview Lenz litijumski uložak rcB 1200 Uputstvo za upotrebu
Sveobuhvatno uputstvo za upotrebu Lenz litijum-jonskih uložaka rcB 1200, koje detaljno opisuje rukovanje, sigurnost i održavanje. Naučite kako da koristite i održavate svoje grijane uloške.
Preview LENZ sigurnosne upute za tekstilne i elektroničke proizvode
Sigurnosne upute za LENZ proizvode koji kombiniraju tekstil i elektroniku, s naglaskom na upotrebu kompatibilnih LENZ litijumskih baterija i pridržavanje sigurnosnih mjera opreza kako bi se spriječio strujni udar, požar i ozljede.
Preview LENZ upute za sigurnost i njegu grijane odjeće
Sigurnosne smjernice i smjernice za njegu LENZ grijane odjeće, s detaljnim opisom pranja, sušenja i upotrebe LENZ litijumskih baterija kako bi se spriječili strujni udar, požar i ozljede.