LEDONE Uputstvo za upotrebu mikrotalasnog senzora pokreta

1. Proizvod je gotovview

The LEDONE Microwave Motion Sensor is designed for commercial lighting applications, offering advanced motion detection and 0-10V dimming capabilities. This sensor provides reliable performance across a wide range of environmental conditions, contributing to energy efficiency and automated lighting control.

Front view of the LEDONE Microwave Motion Sensor, a white rectangular device with a small black sensor window and a white adjustment knob, with wires extending from one end.

Slika 1: Prednja strana view of the LEDONE Microwave Motion Sensor.

Ključne karakteristike:

0-10V Dimmable: Compatible with most popular dimmers for commercial projects.
360° Wide Angle Detection: Detects movement up to 20 feet from any angle.
Stabilan i pouzdan: Operates effectively in temperatures from -40°F to 158°F.
Ušteda energije: Automatic on/off functionality based on detected movement.

2. Postavljanje i instalacija

Proper installation is crucial for optimal performance. This device is designed for wall mount installation and requires a corded electric connection. Consult a qualified electrician for wiring if you are unfamiliar with electrical installations.

Side view of the LEDONE Microwave Motion Sensor showing multiple colored wires (red, black, white, grey, purple) extending from one end, indicating electrical connections.

Slika 2: Bočna strana view of the sensor with wiring connections.

Koraci instalacije:

Isključivanje struje: Ensure power to the installation area is turned off at the circuit breaker before beginning any wiring.
Montaža: Securely mount the sensor to a wall using appropriate hardware. Ensure the sensor has an unobstructed view područja detekcije.
Ožičenje: Connect the sensor to the power supply and lighting fixture according to local electrical codes and the wiring diagram provided with the product packaging. The sensor supports 0-10V dimming; ensure proper connections for this functionality if desired.
Priključak za napajanje: Nakon što su svi priključci sigurni, vratite napajanje u strujno kolo.
Početni test: Perform an initial test to ensure the sensor powers on and the connected lights respond.

Konfiguracija:

The sensor can be configured using either DIP switches or a remote control (sold separately). Refer to the specific instructions included with your product for detailed settings related to detection sensitivity, hold time, and daylight harvesting.

3. Uputstvo za upotrebu

The LEDONE Microwave Motion Sensor operates by detecting movement within its 360-degree detection zone. Once configured, the sensor will automatically control connected lighting based on presence detection and ambient light levels (if daylight harvesting is enabled).

Automatski rad:

When motion is detected, the sensor will activate the connected lighting.
If no motion is detected for a pre-set "hold time," the sensor will either dim the lights (if 0-10V dimming is configured) or turn them off completely.
The detection range is up to 20 feet, covering a wide area.

Podešavanje postavki:

Settings such as sensitivity, hold time, and dimming levels can be adjusted via the DIP switches on the unit or through a compatible remote control. Consult the specific configuration guide for your model to understand each setting's function and how to adjust it.

4. Održavanje

The LEDONE Microwave Motion Sensor is designed for minimal maintenance. Regular checks can help ensure continued optimal performance.

čišćenje: Periodically wipe the sensor's surface with a soft, dry cloth to remove dust or debris. Avoid using abrasive cleaners or solvents.
inspekcija: Annually inspect the wiring connections for any signs of wear or damage. Ensure the sensor is securely mounted.
Faktori okoline: Ensure the sensor is not obstructed by new installations or objects that could interfere with its detection field.

5. Otkrivanje problema

If you encounter issues with your LEDONE Microwave Motion Sensor, refer to the following common troubleshooting steps:

Problem	Mogući uzrok	Rješenje
Lights do not turn on with motion.	Nema napajanja za senzor. Neispravno ožičenje. Sensor sensitivity set too low. Obstruction in detection path.	Provjerite prekidač i priključke za napajanje. Provjerite ožičenje u odnosu na dijagram. Increase sensor sensitivity via DIP switch or remote. Uklonite sve prepreke.
Lights remain on or turn on without motion.	Sensor sensitivity set too high. Interference from external sources (e.g., HVAC, vibrations). Hold time set too long.	Decrease sensor sensitivity. Relocate sensor or identify source of interference. Adjust hold time setting.
Funkcija zatamnjenja ne radi.	Incorrect 0-10V wiring. Incompatible dimmer or fixture.	Verify 0-10V wiring connections. Ensure connected fixture and dimmer are 0-10V compatible.

If the problem persists after attempting these solutions, contact LEDONE customer support for further assistance.

6. Specifikacije

Feature	Detalj
Brand	LEDONE
Broj modela	0-10V DIMMING (LOD-BRI810-B-D)
Boja	Bijelo
Izvor napajanja	Corded Electric (120-277 Vac)
Maksimalni domet	20 stopa
Vrsta montaže	Zidni nosač
Ugao detekcije	360 stepeni
Radna temperatura	-40°F do 158°F
Dimenzije proizvoda	4.17 x 1.6 x 1.46 inča
Težina artikla	1 funta

7. Informacije o garanciji

LEDONE products are manufactured to high standards. For specific warranty terms and conditions applicable to your Microwave Motion Sensor, please refer to the documentation included with your purchase or visit the official LEDONE website. LEDONE is based in California and aims to provide quality products and services.

8. Korisnička podrška

For technical assistance, troubleshooting beyond this manual, or inquiries regarding your LEDONE Microwave Motion Sensor, please contact LEDONE customer support.

You can typically find contact information on the LEDONE official webweb-mjestu ili putem prodavača gdje je proizvod kupljen.

Online resursi: Posjetite LEDONE Store on Amazon za dodatne informacije o proizvodima i podršku.

LEDONE 0-10V DIMMING (LOD-BRI810-B-D)