Uvod
The HUAWEI FreeBuds 4i are wireless in-ear headsets designed to provide a high-quality audio experience with active noise cancellation. Featuring a compact design and long battery life, these earbuds are suitable for various daily activities, from listening to music to making calls. This manual provides instructions for setting up, operating, maintaining, and troubleshooting your FreeBuds 4i.

Image: The HUAWEI FreeBuds 4i charging case, open to reveal the two earbuds nestled inside. The case and earbuds are white.
Setup
1. Početno punjenje
Before first use, ensure your HUAWEI FreeBuds 4i and their charging case are fully charged. Connect the charging case to a power source using a USB-C cable. The indicator light on the case will show charging status.
2. Uparivanje sa vašim uređajem
For HUAWEI devices running EMUI 10.0 or later:
- Open the charging case with the earbuds inside, and hold it close to your HUAWEI phone or tablet.
- A pop-up notification will appear on your device, prompting you to pair. Follow the on-screen instructions to complete the pairing process.
- Once paired, the earbuds will automatically connect to your device whenever you open the charging case.
For other devices (Bluetooth pairing):
- Open the charging case. Press and hold the Function button on the side of the charging case for 2 seconds until the indicator light flashes white. This indicates the earbuds are in pairing mode.
- On your device, go to Bluetooth settings and select "HUAWEI FreeBuds 4i" from the list of available devices.
- Potvrdite uparivanje.

Image: Two individual HUAWEI FreeBuds 4i earbuds, shown in white, highlighting their in-ear design.
Uputstvo za upotrebu
Otkazivanje aktivne buke (ANC)
The FreeBuds 4i feature Active Noise Cancellation to reduce ambient noise. Sensors actively detect and reduce surrounding sounds, allowing for a more immersive audio experience. The dual-mic system and beamforming technology also enhance call clarity by reducing wind noise and accurately picking up your voice.
Dodirnite Kontrole
The FreeBuds 4i utilize touch controls for various functions. Specific gestures (e.g., tap, long press) can be used to:
- Pusti/pauziraj muziku
- Odgovaranje / završavanje poziva
- Switch between ANC modes (Active Noise Cancellation, Awareness Mode, Off)
Refer to the HUAWEI AI Life app for customizable touch control settings and detailed gesture functions.

Image: A person wearing HUAWEI FreeBuds 4i earbuds in a bustling urban environment, with icons below depicting "Station," "Metro," and "Mall," signifying the effectiveness of Active Noise Cancellation in various noisy settings.
Održavanje
Punjenje
The HUAWEI FreeBuds 4i offer remarkable battery endurance. A full charge provides up to 10 hours of continuous music playback. The quick charge technology allows for 4 hours of audio enjoyment from just a 10-minute charge. Always use a compatible USB-C charger.

Image: A graphic highlighting "10 Hours continuous Playback" with the text "Last All Day, Music All the Way," featuring the HUAWEI FreeBuds 4i earbuds.
Čišćenje
Da biste održali optimalne performanse i higijenu, redovno čistite slušalice i kućište za punjenje.
- Koristite meku, suhu krpu koja ne ostavlja dlačice za brisanje slušalica i kućišta za punjenje.
- Gently remove any earwax or debris from the ear tips and speaker meshes using a small, soft brush or cotton swab.
- Izbjegavajte upotrebu abrazivnih materijala, rastvarača ili jakih hemikalija.
- Ensure the charging ports are free of dust and debris.
Rješavanje problema
Slušalice se ne uparuju ili ne povezuju
- Provjerite da li su slušalice i kućište za punjenje dovoljno napunjeni.
- Place the earbuds back into the charging case, close the lid, wait a few seconds, then open it again to re-initiate pairing mode.
- For non-HUAWEI devices, ensure Bluetooth is enabled on your device and the earbuds are in pairing mode (flashing white indicator).
- Pokušajte zaboraviti uređaj u Bluetooth postavkama telefona i ponovo ga upariti.
Nema zvuka ili je zvuk lošeg kvaliteta
- Provjerite nivoe jačine zvuka i na uređaju i na slušalicama.
- Provjerite da li su slušalice pravilno postavljene u uši.
- Clean the ear tips and speaker meshes to remove any obstructions.
- Približite se povezanom uređaju kako biste izbjegli ometanje signala.
Problemi s punjenjem
- Provjerite je li kabel za punjenje sigurno spojen i na kućište i na izvor napajanja.
- Pokušajte koristiti drugi USB-C kabel i adapter za napajanje.
- Provjerite da li su kontakti za punjenje na slušalicama i unutar kućišta čisti i bez prljavštine.
Specifikacije
| Brand Name | HUAWEI |
| Naziv modela | Otter-CT030 |
| Boja | Bijelo |
| Slušalice Postavljanje uha | U uhu |
| Form Factor slušalica | U uhu |
| Tehnologija povezivanja | Bežični |
| Kontrola buke | Aktivno poništavanje buke |
| Impedansa | 32 Ohma |
| Osjetljivost | 93 dB |
| Priključak za slušalice | usb |
Garancija i podrška
For detailed warranty information, please refer to the warranty card included with your product or visit the official HUAWEI support website.
For further assistance, technical support, or to download the latest user guides and software updates, please visit: HUAWEI Support





