Uvod
This manual provides instructions for the ALLIMITY Replacement Remote Control, designed to operate various Sanyo LCD HDTV models. This remote control is an infrared (IR) device and requires no programming; simply insert batteries to begin use.
Setup
Instalacija baterije
- Pronađite odeljak za baterije na poleđini daljinskog upravljača.
- Pomaknite poklopac baterije prema dolje ili prema van da biste ga otvorili.
- Insert two (2) AAA batteries, ensuring the positive (+) and negative (-) terminals align correctly with the markings inside the compartment. Batteries are not included.
- Vratite poklopac baterije tako što ćete ga gurnuti nazad na mjesto dok ne klikne sigurno.
Slika: Stražnja strana view of the remote control with the battery cover removed, illustrating the correct placement for two AAA batteries.
Operacija
Osnovne funkcije
Once batteries are installed, the remote control is ready for use. Point the remote control directly towards the infrared sensor on your Sanyo LCD HDTV. Ensure there are no obstacles between the remote and the TV sensor.
Slika: Front view of the ALLIMITY Replacement Remote Control, displaying its button layout.
Kompatibilni modeli
This replacement remote control is compatible with a wide range of Sanyo LCD HDTV models. Below is a list of known compatible models:
- GXFA Series: DP19648, DP26640, DP26648, DP26649, DP32648, DP32649, DP37649, DP37819, DP39842, DP39843, DP39E23, DP42848, DP42849, DP46812, DP46819, DP46848, DP46849, DP50719, DP52848, FVE3923, FVE3963, DP19649
- GXBD Series: DP26647, DP26746, DP32647, DP32746, DP37647, DP42545, DP42647, DP42746, DP50747, HT27546, HT27547, HT32546, HT27745, HT28745, HT30746, DP26647A, DP37647AR
- GXBM Series: DP32640, DP32642, DP42142, DP42740, DP42841, DP46841, DP47840, DP50741, DP50842, FVM3982, FVM4212, FVM5082, DP42840, DP26640-00, DP26640-01, DP26640-02, DP26640-04, DP32640-00, DP32640-01, DP32640-03
- CS-90283-1T Series: DP32242, DP46142
If your specific model is not listed, please refer to the support section for assistance.
Image: A visual comparison of the ALLIMITY replacement remote with various original Sanyo remote controls, highlighting compatibility.
Održavanje
Čišćenje
Za čišćenje daljinskog upravljača koristite meku, suhu krpu. Za tvrdokornu prljavštinu, lagano obrišiteampen the cloth with water or a mild cleaning solution. Avoid using harsh chemicals or abrasive materials, as these can damage the remote's surface or internal components.
Skladištenje
Kada se daljinski upravljač ne koristi duži period, preporučuje se uklanjanje baterija kako biste spriječili curenje, koje može oštetiti daljinski upravljač. Čuvajte daljinski upravljač na hladnom i suhom mjestu, dalje od direktne sunčeve svjetlosti i ekstremnih temperatura.
Rješavanje problema
Daljinski upravljač ne reaguje
- Provjerite baterije: Ensure batteries are inserted correctly with the correct polarity (+/-). Replace old or depleted batteries with new AAA batteries.
- Linija vida: Verify that there are no obstructions between the remote control and the TV's infrared sensor. The remote requires a clear line of sight to function.
- Udaljenost: Ensure you are within an effective range of the television.
Specific Functions Not Working
While this is a direct replacement, some advanced or rarely used functions might behave differently or not be present compared to the original remote. If a primary function (e.g., power, volume, channel) is not working, refer to the 'Remote Control Not Responding' section.
Specifikacije
- Dimenzije proizvoda: 7 x 2 x 0.7 inča
- Težina artikla: 2.25 unce
- Broj modela: AMT-4IN1-GXFA
- Potrebne baterije: 2 AAA baterije (nisu uključene)
- Connective Technology: infracrveni (IR)
- Kompatibilni uređaji: Sanyo LCD HDTVs
- Boja: Crna
Podrška
For further assistance, including inquiries about specific model compatibility not listed in this manual, please contact ALLIMITY customer support. While specific warranty details are not provided in this document, please retain your purchase receipt for any potential warranty claims.
