Cudy LT300 4G LTE Wi-Fi ruter - korisnički priručnik

1. Uvod

The Cudy LT300 is a 4G LTE Wi-Fi Router designed to provide high-speed internet access using a cellular SIM card. It supports LTE download speeds of up to 150 Mbps and Wi-Fi speeds of up to 300 Mbps. This manual provides instructions for setting up, configuring, and maintaining your LT300 router.

2. Sadržaj paketa

Molimo vas da pažljivo provjerite sadržaj paketa. Ako bilo koji artikal nedostaje ili je oštećen, obratite se prodavaču.

• Cudy LT300 4G LTE Wi-Fi Router
• Adapter za napajanje
• Ethernet kabl
• Detachable LTE Antennas (x2)
• SIM Card Adapters (Nano to Micro, Nano to Standard)
• Vodič za brzu instalaciju

3. Proizvod je gotovview

3.1. Hardverske komponente

Familiarize yourself with the ports, buttons, and LED indicators on your Cudy LT300 router.

Slika 1: Front view of the Cudy LT300 router, showing the power, Wi-Fi, LTE signal, and LAN/WAN LED indicators.

• LED za napajanje: Označava status napajanja.
• Wi-Fi LED: Označava status Wi-Fi mreže.
• LTE Signal LEDs: Indicate 4G LTE signal strength.
• LAN/WAN LED diode: Označava aktivnost Ethernet porta.

Slika 2: Pozadi view of the Cudy LT300 router, displaying the power port, LAN/WAN ports, SIM card slot, and WPS/Reset button.

• Napajanje: Povežite isporučeni adapter za napajanje.
• LAN/WAN portovi: Gigabit Ethernet ports for wired connections. One port can function as WAN for wired internet.
• Utor za SIM karticu: Insert your 4G LTE SIM card here.
• Dugme WPS/Reset: Press for WPS function. Press and hold for 5-8 seconds to factory reset.
• Antenski konektori: Connect the detachable LTE antennas.

4. Podešavanje

4.1. Install LTE Antennas

Screw the two detachable LTE antennas into the connectors on the rear panel of the router. Ensure they are securely tightened and oriented vertically for optimal signal reception.

4.2. Umetnite SIM karticu

The Cudy LT300 uses a standard-sized SIM card. If your SIM card is Nano or Micro, use the provided SIM card adapters to fit it into the standard slot.

1. Uvjerite se da je ruter isključen.
2. Pronađite utor za SIM karticu na zadnjoj ploči.
3. Insert the SIM card into the slot with the metal contacts facing down and the notched corner oriented correctly, as indicated on the router. Push until it clicks into place.
4. If removing, gently push the SIM card in again until it springs out.

Slika 3: Illustration of inserting a SIM card into the Cudy LT300 router's SIM card slot.

4.3. Uključite napajanje

Connect the power adapter to the router's power port and then plug the other end into a power outlet. The Power LED will illuminate, and the router will begin to boot up. This process may take approximately 30-60 seconds.

5. Konfiguracija

5.1. Pristup Web Upravljačko sučelje

To configure your router, you need to access its web-bazirano upravljanje interfejsom.

1. Connect your computer to the router via Wi-Fi (SSID and password are on the label at the bottom of the router) or an Ethernet cable.
2. Otvori a web preglednik (npr. Chrome, Firefox, Edge).
3. Unesite zadanu IP adresu 192.168.10.1 u adresnu traku i pritisnite Enter.
4. Unesite zadane pristupne podatke. Zadano korisničko ime je admin a zadana lozinka je admin (or as printed on the router label).
5. Follow the on-screen instructions for the initial setup wizard, if prompted. It is recommended to change the default login password for security.

5.2. Osnovne Wi-Fi postavke

Navigate to the "Wireless" or "Wi-Fi Settings" section in the web interface to customize your wireless network.

• SSID (ime mreže): Change the default Wi-Fi network name to a unique name.
• Password (Security Key): Set a strong, secure password for your Wi-Fi network. WPA2-PSK AES is recommended.
• Sigurnosni način rada: Select WPA2-PSK.

5.3. LTE/Internet Settings

The router should automatically detect your SIM card and configure the LTE connection. If not, you may need to manually configure the APN (Access Point Name) settings provided by your mobile operator.

1. Go to the "Network" or "LTE Settings" section.
2. Check the connection status. If "Disconnected" or "Limited," verify APN settings.
3. Select "Manual" APN configuration if automatic fails and enter the correct APN, username, and password from your mobile operator.
4. Save changes and reboot the router if prompted.

5.4. VoLTE Configuration

The Cudy LT300 supports VoLTE functionality. If your SIM card and mobile operator support VoLTE, you may find settings under "Voice" or "VoLTE" in the web interface to enable or configure this feature. Consult your mobile operator for specific VoLTE settings if required.

6. Operativni

6.1. Povezivanje uređaja

• Wi-Fi: On your device (smartphone, tablet, laptop), search for the Wi-Fi network name (SSID) you configured and enter the Wi-Fi password.
• Ethernet: Connect an Ethernet cable from a LAN port on the router to the Ethernet port on your computer or other wired device.

6.2. LED indikatori

Monitor the LED indicators on the front panel to understand the router's status:

• LED za napajanje: Solid Green (On), Off (Off).
• Wi-Fi LED: Solid Green (Wi-Fi On), Blinking (Data Transfer), Off (Wi-Fi Off).
• LTE Signal LEDs: Indicate signal strength (e.g., 3 bars for strong, 1 bar for weak).
• LAN/WAN LED diode: Solid Green (Connected), Blinking (Data Transfer), Off (No Connection).

7. Održavanje

7.1. Ažuriranje firmvera

Regularly check for and install firmware updates to ensure optimal performance and security. Firmware files can usually be downloaded from the Cudy official website.

1. Preuzmite najnoviji firmver file for your LT300 model.
2. Pristupite web interfejs za upravljanje.
3. Navigate to "System Tools" or "Firmware Upgrade."
4. Otpremite preuzeti firmver file and follow the on-screen instructions. Do not power off the router during the upgrade process.

7.2. Factory Reset

A factory reset will restore the router to its default settings. This can be useful for troubleshooting or if you forget your login password.

• With the router powered on, press and hold the WPS/Reset button on the rear panel for 5-8 seconds until the LEDs flash.
• Otpustite dugme. Ruter će se ponovo pokrenuti sa fabričkim postavkama.

8. Otkrivanje problema

• Nema internetske veze:
  • Check if the SIM card is inserted correctly and activated.
  • Verify LTE signal strength via the LED indicators.
  • Ensure APN settings are correct in the web interfejs.
  • Ponovo pokrenite ruter i povezane uređaje.
• Ne mogu pristupiti Web Upravljački interfejs:
  • Provjerite je li vaš uređaj povezan na Wi-Fi ili Ethernet mrežu rutera.
  • Provjerite IP adresu 192.168.10.1 je ispravno otkucano.
  • Pokušajte drugačije web pretraživač.
  • Perform a factory reset if you forgot the login password.
• Spora brzina Wi-Fi mreže:
  • Check LTE signal strength; a weak signal will affect overall speed.
  • Ensure the router is placed in a central location, away from obstructions and interference.
  • Smanjite broj povezanih uređaja ili aktivnosti koje zahtijevaju puno propusnog opsega.
  • Consider changing the Wi-Fi channel in the web interfejs.

9. Specifikacije

10. Sigurnosne informacije

• Do not expose the device to water or humidity.
• Ne pokušavajte sami rastaviti ili popraviti uređaj.
• Koristite samo isporučeni adapter za napajanje.
• Držite uređaj dalje od izvora topline i direktne sunčeve svjetlosti.
• Osigurajte odgovarajuću ventilaciju oko uređaja.

11. Garancija i podrška

For warranty information and technical support, please refer to the warranty card included in the package or visit the official Cudy website. Support resources typically include FAQs, firmware downloads, and contact information.