JBL GT5-10D 10-Inch Dual-Voice-Coil Subwoofer User Manual

1. Uvod

The JBL GT5-10D is a 10-inch dual-voice-coil subwoofer designed for car audio systems. It features a vented motor structure and is engineered to deliver robust bass performance. This manual provides essential information for the proper setup, operation, and maintenance of your subwoofer.

Slika 1: Prednja strana view of the JBL GT5-10D Subwoofer.

Ključne karakteristike uključuju:

• 10-inch Dual 4 Ohm GT5 Series Subwoofer
• Peak Power Handling: 1100 watts
• RMS Power Handling: 275 watts
• Recommended power range: 150 - 275 watts RMS
• Polypropylene woofer cone material
• Rubber-coated tinsel leads for enhanced durability
• Proprietary steel frame

2. Postavljanje i instalacija

Proper installation is crucial for optimal performance and longevity of your JBL GT5-10D subwoofer. It is recommended that installation be performed by a qualified car audio professional.

2.1 Zahtjevi za kućište

The subwoofer is designed to operate within a suitable enclosure. Consult the specifications section for recommended enclosure volumes and types. Ensure the enclosure is robust and sealed properly to prevent air leaks, which can degrade sound quality.

Figure 2: Subwoofer dimensions for enclosure planning. The subwoofer measures 12"D x 12"W x 10"H.

2.2 Ožičenje dvostrukih zvučnih zavojnica

The GT5-10D features dual 4-ohm voice coils, allowing for flexible wiring configurations to match your ampZahtjevi za impedansu transformatora. Uobičajene konfiguracije uključuju:

• Paralelno ožičenje: Connect both voice coils in parallel for a 2-ohm load. This configuration typically draws more power from the amplifier.
• Serijsko ožičenje: Connect both voice coils in series for an 8-ohm load. This configuration draws less power and is suitable for amplifiers that are not 2-ohm stable.

Always refer to your amplifier's manual for compatible impedance loads and wiring diagrams. Incorrect wiring can damage both the subwoofer and the amplifier.

Slika 3: Bočna strana view of the subwoofer, illustrating the terminal connections for wiring.

2.3 Priključak za napajanje

Spojite subwoofer na odgovarajući amplifier using high-quality speaker wire. Ensure proper polarity (+ to + and - to -) to avoid phase issues that can negatively impact sound quality. The subwoofer is designed for wired connectivity, typically via RCA inputs from your head unit to the amplifier, and then speaker wire from the amplifier na subwoofer.

3. Uputstvo za upotrebu

Once installed and wired correctly, the JBL GT5-10D subwoofer will enhance your car audio system's bass response. The primary control for the subwoofer will be through your car's head unit or external ampkontrole lifiera.

3.1 Početno uključivanje i podešavanje

1. Ensure all connections are secure before powering on your audio system.
2. Počnite sa amplifier's gain control set to its minimum (lowest) setting.
3. Play a piece of music with a good bass range.
4. Polako povećavajte amppojačanje lifiera dok se ne postigne željeni nivo basa bez izobličenja.
5. Podesite niskopropusni filter (LPF) na vašem amppojačalo ili glavnu jedinicu za besprijekorno spajanje izlaza subwoofera s glavnim zvučnicima. Uobičajena početna tačka je oko 80-100 Hz.
6. If your system includes a phase control, experiment with 0° and 180° settings to find the one that provides the most impactful and coherent bass.

While the product specifications mention "Touch" as a control method, for a passive subwoofer like the GT5-10D, this typically refers to controls on the connected amplifier or head unit, not directly on the subwoofer itself.

4. Održavanje

The JBL GT5-10D subwoofer is built for durability, but proper care will ensure its long-term performance.

• čišćenje: Use a soft, dry cloth to wipe down the subwoofer cone and surround. Avoid using harsh chemicals or excessive moisture.
• inspekcija: Periodically check the speaker terminals and wiring for any signs of corrosion or loose connections. Ensure the rubber-coated tinsel leads are intact, as they protect against wear.
• Faktori okoline: While designed for car environments, extreme temperatures and direct sunlight can affect performance over time. Ensure adequate ventilation around the subwoofer.

5. Otkrivanje problema

If you experience issues with your JBL GT5-10D subwoofer, refer to the following common problems and solutions:

Ako problemi i dalje postoje, obratite se profesionalnom tehničaru za auto audio.

6. Specifikacije

7. Understanding Your Subwoofer (Video)

This video provides additional insights into the design and technology behind JBL and Infinity speakers, including concepts relevant to your subwoofer's performance, such as materials and cone design.

8. Garancija i podrška

The JBL GT5-10D subwoofer comes with a standard manufacturer's warranty. Please refer to the warranty documentation included with your product for specific terms, conditions, and registration information. For technical support or service inquiries, please contact JBL customer service or visit the official JBL website.

Manufacturer: Harman Kardon