Bryant C-Flo Lite Multi Material Heater
www.bryant.dental
UK +44 (0)1932 320064
AUS +61(2)72089592
The BD story
Bryant Dental was created by dentists to solve clinical problems they themselves had faced, by using technology in unprecedented ways.
Dr Connor Bryant CEO and Founder
Since our incorporation, we have grown exponentially, thanks to our community of passionate, talented dentists who believe, like us, that dentistry can be done differently.
Dr Priyam Patel Co CEO
Inspired by clinicians who strive for brilliance, we aim to bring the latest innovation and technology to extraordinary dentists to facilitate their pursuit of excellence.
The C-Flo story
More than a composite heater.
C-Flo is a one-stop solution for better, longer lasting fillings, more effective root canal treatments, and painless anesthesia, giving you the adaptability to constantly achieve your most outstanding work.
C-Flo Lite instructions
Intended use: C-Flo is a material heating device that is used to heat composite, local anesthetic (LA) and sodium hypochlorite. The device is designed to be used by qualified dental professionals, including, but not limited to, dentists and dental hygienists. C-Flo must be used with the attachments provided.
What’s included
- x1 C-Flo Lite Base
- x1 Power supply unit
- x1 Indicator tag
- Getting started
Insert the USB-C power cable into the C-Flo base.
Please position the C-Flo Pro on a surface so that the power supply is readily accessible to allow it to be disconnected easily if required. - Switch ON
Touch and release the C-Flo logo.
- Changing temperature
To change the temperature quickly touch the C-Flo logo on the base. The unit will change color with each touch. Stop when the desired color/temperature is active.
LA: Local anesthetics
Please note: Heating times (+/-10%) & temperatures (+/-0,5⁰C) may vary depending on environmental conditions. - Switch OFF
Hold down the C-Flo logo for 3 seconds until the LED light turns OFF.
C-Flo Lite
C-Flo Lite has the capacity to work in ways that suit you, holding a range and number of materials. With a high density alloy acting as an efficient & conductive heat sink.
Temperature guide
39ºc
LA cartridges only
45ºc
Composites and hypochlorite
55ºc
Composites and hypochlorite
Power supply
It’s important to use the official mains adaptor that has been provided, at all times. Using third-party adaptors can affect the product’s performance and its warranty.
Technical
Specification
| Heating time for each temperature | See table |
| Temperature fluctuation variance | +/- 0.5ºC |
| IPX rated | IPX 0 |
| Adverse reactions | None Known |
| Storage temperature | 0-40ºC |
| Operating temperature | 0-30ºC |
| Input power | 12V  4A |
| Output power | 100-240V~50/60Hz 1.5A |
| Voltage fluctuations | 100-240Hz~50/60Hz 9V-15V 0.01-5.00A@48W |
Only use supplied charging plug.
Item gets very hot risk of burning.
Environmental Operating Conditions
| Relative humidity | 30-75% |
| Atmospheric pressure | 70.0 kPa to 106.0 kPa |
| Environment | Indoor use only |
| Altitude | Up to 3000m |
| Pollution | Degree 2 |
Repairs
Accidental damage
- Safely return: Please let us, or your local Bryant Dental distributor know as soon as possible so we can work out how best to support you in the interim.
- Inspection & repair: Our engineers will inspect the damage and, carry out a root cause analysis and repair or replace the damaged parts.
- Return & swap: Once repaired, we will ask you to confirm a delivery address and ship your C-Flo back to you.
Please note: If damage is not covered by Warranty you will be advised of any costs before hand.
Warranty.
Limited liability policy
Bryant Dental will repair any C-Flo issue arising from a manufacturing defect for a period of 2 years, without charge. The liability will not exceed the amount you originally paid for the product. The warranty does not cover defects arising from negligence, product modification, unauthorized repairs, accidental damage, theft, loss or acts of God.
Safety instructions
Conditions
- Only use power supply provided. Use of any other power supply may cause harm and will invalidate the warranty.
- Do not immerse the C-Flo in water.
- If problems occur with the unit, return to Bryant Dental for repair, attempting to repair yourself will void the warranty.
- Do not change or modify any of the existing components without authorization from Bryant Dental.
- Do not leave the unit on without supervision.
- Always follow manufacturer instructions when deciding to heat a material.
- Take care when touching the surfaces during and after use as they may be hot.
- C-Flo is not to be autoclaved, attachments may be.
- Do not use the C-Flo power supply with any other USB-C compatible device, it may destroy the other device.
- The C-Flo will not work as intended with other USB-C power supplies.
- Do not use any power supply unit other than the one provided.
- Item gets very hot risk of burning.
Troubleshooting
Unit is not heating
Please remove the power cord and leave the device to reset for 10 seconds before re-inserting. If still not heating after this hard reset, please contact Bryant Dental.
Device not powering on
Please check and re-insert connections and ensure power is switched on.
Disposal notice.
When you plan to dispose of the device, please return to Bryant Dental for recycling.
The European Union Waste Electrical and Electronic Equipment (WEEE) Directive forbids the disposal of waste electrical and electronic equipment as unsorted municipal waste, requiring that it be collected and recycled or disposed of separately. Hazardous substances are present in electrical and electronic equipment and present potential risks to human health and the environment if disposed of in municipal landfills, which are not designed to prevent migration of substances into the soil and groundwater.
Compliant with RoHS Directive 2011/65/EU.
Take a tour at BD
You’re welcome to visit BD HQ and research laboratory in Virginia Water, Surrey, any time.
Meet the engineers and product development teams to share your ideas of product improvements and to see where your products are made.
If you have any ideas on the next generation of smart products why not work with us to develop them.
This is the 2nd generation of the dental material heater developed by BD. Help us to develop the 3rd.
Thank you for choosing Bryant Dental.
We believe in creating excellent products for extraordinary dentists, and we are always proud to gain a new member of our community of passionate clinicians. Join the BD club to see what other members have done with C-Flo.
Intended use
C-Flo was developed to be used by dental professionals as a medical device to heat dental materials including composite resin, sodium hypochlorite and local anesthetic.
Get in touch
If you have any questions or concerns, please don’t hesitate to get in touch.
Scan to connect
Our 24/7 support team is always on hand if you need anything. In the first instance please contact your product specialist or local distributor, you can find their contact details on the support page of the website at www.bryant.dental/support
Our office team are also available to answer any questions you may have.
UK office contact number:
- + 44 (0)1932 320064
- + 44 (0)7990 113723
UK office address:
Bryant Dental, Hilltop Farm, Lyne Lane, Chertsey, KT16 0AW, United Kingdom
Australian office contact number:
+61(2)72089592
+61 483 835 021
Australian Office Address:
Bryant Dental, Suite 12, 13U/175 Lower Gibbes St Roseville NSW 2069, Australia
Bryant Dental x Husti.
Husti is a charity which empowers children in rural India using education and offering them tools to improve their lives. Bryant Dental are proud to partner with this cause which aims to change lives and build communities for underprivileged children.
You have the power to change lives.
Find out more about the work they do here
Parts List:
| Part Name | Part Code | Supplier |
| C-Flo® Lite | 5060678495930 | Bryant Dental |
| Power Supply Unit (Country Specific) | 5060678496449 | Bryant Dental |
Applicable Standards:
- EN 60601-1:2006+A1:2013+A12:2014
- EU-MDR 2017/745
REF AXKJ-6
SN See C-Flo Lite reverse side
GTIN13 5060678495930
Follow instructions for use
Do not use if package is damaged
Fragile, handle with care
This device is not sterile
Do not dispose
Keep dry
Item gets very hot risk of burning
Temperature limit
Known Contraindications: None
Advena Ltd. Tower Business Centre, 2nd Flr., Tower Street, Swatar, BKR 4013 Malta
Bryant Dental, The Barns, Hilltop Farm, Lyne Lane, Chertsey, KT16 0AW
Meets requirements of the
Medical Device Directive
UK +44 (0)1932 320064
AUS +61(2)72089592
UK +44 (0)7990 113723
AUS +61 483 835 021
Bryant Dental, The Barns, Hilltop Farm, Lyne Lane, Chertsey, KT16 0AW
C-Flo® and Bryant Dental® are registered trademarks in the United Kingdom and Australia.
Registered in England & Wales No. 10396020. Registered in Australia No. 634 752 980
Documents / Resources
 |
Bryant C-Flo Lite Multi Material Heater [pdf] User Manual C-Flo Lite Multi Material Heater, C-Flo, Lite Multi Material Heater, Material Heater |
