BROMIC IM0050HC-NR Self Contained Ice Machine Hollow Cube
Specifications
- Model: IM0050HC-NR
- Part Number: 3935193
- Unit Weight: 45kg
- Packaged Weight: 53kg
- Ambient Temperature: Suitable for various ambient temperatures
- Energy Consumption: 6.2 kWh/24h
- Refrigeration Capacity: 250W
- Refrigerant: R290
- Current: 1.5A
- Electrical Voltage: 230V
- Frequency: 50Hz
- Power Supply: Single Phase
- Plug Supplied: 1 x 10A Rear, bottom left
- Water Consumption: 2L/h
- Maximum Daily Production: 50kg/24h
- Ice Type: Hollow Cube
- Storage Bin Capacity: 17kg
- Warranty: 3 Years Parts & 1 Year Labour Bromic Extra Care
- External height excludes legs
- Production is based on kg/24hr at 10°C air & 10°C water
DIMENSIONS
| Dimension Type | Width (mm) | Depth (mm) | Height (mm) |
|---|---|---|---|
| External | 485 | 575 | 810 |
| Packaged | 550 | 640 | 840 |
Ice Dimensions
Features
Installation
- Site Requirements
- Ventilation: Maintain at least 150mm clearance on all sides.
- Ambient Temp: Operate between 10°C and 38°C for optimal performance.
- Surface: Ensure the unit is installed on a level, stable, and waterproof floor.
- Plumbing
- Water Inlet: Connect to a cold water supply (pressure 100–550 kPa).
- Backflow Prevention: A check valve is recommended.
- Drainage: Gravity drain must be below machine level. No upward slopes or loops.
- Electrical
- Power: 220–240V AC, 50Hz, 10A outlet.
- Plug Access: Socket must be accessible for service and shut-off.
- No Extension Leads: Direct plug-in only to avoid electrical hazards.
- Leveling
- Use adjustable legs to ensure the machine is level front to back and side to side. This ensures proper ice formation and water drainage.
Operation
- Startup
- Connect water supply and drainage.
- Plug In the unit and turn the power switch ON.
- Initial Cycle: Allow the machine to complete a full cycle and discard the first batch of ice (this flushes out the system).
- Normal Operation
- Automatic Ice Production: Ice is made continuously and drops into the integrated bin.
- Bin Thermostat: Production stops automatically when the bin is full.
- Indicator Lights: Status LEDs on the control panel show operation, error, or full-bin status.
- User Tips
- Leave Space around unit for airflow.
- Keep Door Closed when not accessing ice to maintain storage temperature.
Cleaning and Maintenance
Daily
- Wipe External Surfaces: Use a damp cloth and mild detergent.
- Empty Bin if not in use overnight.
Weekly
- Clean Ice Bin Interior: Use food-safe sanitizer.
- Inspect Water Filter (if installed): Check for flow or discoloration.
Monthly
- Check Air Vents and Filters: Remove dust buildup using a soft brush or vacuum.
- Flush Drain Line: Pour warm water to ensure no clogs.
Every 6 Months
Descale Machine:
- Turn OFF and drain water from the system.
- Add a recommended descaler solution.
- Run cleaning cycle or manually clean internal components.
- Rinse thoroughly before resuming operation.
Inspect Seals, Valves, and Connections: Replace any worn or damaged parts.
Important Notes
- Never Use Harsh Chemicals or Abrasives.
- Turn Off Power and Water supply before servicing or cleaning.
- Service By Qualified Technicians Only for internal repairs or gas system checks.
FAQ
Q: How often should I clean the ice machine?
A: It is recommended to clean the ice machine at least once a month to maintain hygiene and efficiency.
Q: Can this ice machine be used in a commercial setting?
A: Yes, this self-contained ice machine is suitable for both commercial and residential use.
Documents / Resources
 |
BROMIC IM0050HC-NR Self Contained Ice Machine Hollow Cube [pdf] Installation Guide IM0050HC-NR, 3935193, IM0050HC-NR Self Contained Ice Machine Hollow Cube, IM0050HC-NR, Self Contained Ice Machine Hollow Cube, Ice Machine Hollow Cube, Machine Hollow Cube, Hollow Cube |