BROADCOM-LOGO

BROADCOM AFBR-S50-FEK Evaluation Kit for Time Of Flight Sensor Modules

BROADCOM-AFBR-S50-FEK-Evaluation-Kit-for-Time-Of-Flight-Sensor-Modules-PRODUCT

AFBR-S50-FEK
Evaluation Kit for Time-of-Flight Sensor Modules

Copyright © 2023 Broadcom. All Rights Reserved. The term “Broadcom” refers to Broadcom Inc. and/or its subsidiaries. For more information, go to www.broadcom.com. All trademarks, trade names, service marks, and logos referenced herein belong to their respective companies.
Broadcom reserves the right to make changes without further notice to any products or data herein to improve reliability, function, or design. Information furnished by Broadcom is believed to be accurate and reliable. However, Broadcom does not assume any liability arising out of the application or use of this information, nor the application or use of any product or circuit described herein, neither does it convey any license under its patent rights nor the rights of others.

Getting Started

Evaluation Kit Overview
The Broadcom® AFBR-S50 family evaluation kit is composed of the following components:

  • STM32F401RE MCU evaluation board
  • Functional sensors:
    • AFBR-S50MV85I
    • AFBR-S50MV85G
    • AFBR-S50MV68B
    • AFBR-S50LV85D
    • AFBR-S50LX85D
  • Adapter board, with socket included
  • USB-mini to USB-typeA cable
  • Information cards with an overview of key sensor parameters, key dependencies, and important links

    BROADCOM-AFBR-S50-FEK-Evaluation-Kit-for-Time-Of-Flight-Sensor-Modules-FIG-1

Hardware Assembly

  1. Connect the adapter board and the MCU evaluation board at the Arduino pinout.

    BROADCOM-AFBR-S50-FEK-Evaluation-Kit-for-Time-Of-Flight-Sensor-Modules-FIG-2

  2. Ensure the sensor orientation is correct. Plug the sensor into the socket on the adapter board.

    BROADCOM-AFBR-S50-FEK-Evaluation-Kit-for-Time-Of-Flight-Sensor-Modules-FIG-3

  3. Use the USB cable to connect the evaluation board to the PC.

    BROADCOM-AFBR-S50-FEK-Evaluation-Kit-for-Time-Of-Flight-Sensor-Modules-FIG-4
    NOTE: For more information regarding the use of AFBR-S50 Explorer, refer to the AFBR-S50 User Guide at docs.broadcom.com/docs/AFBR-S50-EK-UG.

Related Documents

The references in the following table may be used in conjunction with this document.

Table 1: References

Document Name Document Number Source
AFBR-S50 User Guide AFBR-S50-EK-UG docs.broadcom.com/docs/AFBR-S50-EK-UG

Revision History

AFBR-S50-FEK-UG100; November 30, 2023
Initial release.

Copyright © 2023 Broadcom. All Rights Reserved. The term “Broadcom” refers to Broadcom Inc. and/or its subsidiaries. For more information, go to www.broadcom.com. All trademarks, trade names, service marks, and logos referenced herein belong to their respective companies.
Broadcom reserves the right to make changes without further notice to any products or data herein to improve reliability, function, or design. Information furnished by Broadcom is believed to be accurate and reliable. However, Broadcom does not assume any liability arising out of the application or use of this information, nor the application or use of any product or circuit described herein, neither does it convey any license under its patent rights nor the rights of others.

Documents / Resources

BROADCOM AFBR-S50-FEK Evaluation Kit for Time Of Flight Sensor Modules [pdf] User Guide
AFBR-S50-FEK Evaluation Kit for Time Of Flight Sensor Modules, AFBR-S50-FEK, Evaluation Kit for Time Of Flight Sensor Modules, Kit for Time Of Flight Sensor Modules, Time Of Flight Sensor Modules, Flight Sensor Modules, Sensor Modules, Modules

References

Leave a comment

Your email address will not be published. Required fields are marked *