BRIGHTSTAR BR100B Remote Control Instructions

BR100B Remote Control

Product Information

Specifications:

• Preprogrammed to operate LG, Samsung, RCA, Philips, Vizio,
  Hisense, Panasonic, and Zenith TVs
• Requires batteries for operation
• New feature for digital channels
• Revision: 5-24-2024

Product Usage Instructions

Initial Setup:

1. Insert batteries into the remote.
2. The remote is preprogrammed for specific TV brands.

Reprogramming the Remote:

1. Manually turn on the TV.
2. Press and hold the SET-UP key until the LED blinks and stays
   on, then release the button.
3. Enter the 3-digit code from the code table.
4. If LED blinks rapidly after entering the code, recheck the code
   list.

Code Search:

1. Turn on the TV.
2. Press and hold the SET-UP key until the LED blinks and stays
   on, then release the button.
3. Press the channel up button slowly and repeatedly until the
   channel changes.
4. Press ENTER to lock in the code.

Code Identification:

1. Turn on the TV.
2. Press and hold the SET-UP key until the LED blinks and stays
   on.
3. Press the SET-UP key again and release.
4. Slowly press each number key from 0 to 9 to identify the
   code.

Reset to Factory Settings:

1. Press and hold SETUP until the LED stays on.
2. Press CC.

Frequently Asked Questions (FAQ):

Q: What should I do if my TV brand is not listed or the TV
doesn’t respond to the remote?

A: You can try using the code search feature by following the
instructions provided in the manual.

Q: How do I identify the correct code for my TV?

A: Follow the steps under “Code Identification” in the manual to
identify and program the correct code for your TV.

Loading PDF…

−+Fit width100%View FullscreenDownload PDFPrint PDF

×

Loading PDF…

BR100B Instructions

This remote is preprogrammed to operate the following brands without setup: LG, Samsung, RCA, Philips, Vizio, Hisense, Panasonic, and Zenith TVs
Simply insert batteries and you’re done.

Note: Reprogramming the remote will make it operate only the brand you reprogrammed it for.

Reprogramming your Remote:
1. Manually turn on the TV. 2. Press and hold the SET-UP key until the LED blinks and stays on, now release the button. 3. Enter the 3-digit code from the code table. After entering the code, the indicator light will turn off, indicating
completion.

Note: If the LED blinks rapidly after entering the code, you may have entered an invalid code. Doublecheck the code list and try again. If volume and channel functions don’t work, try another code.

Important: If your TV code is not listed or the TV doesn’t respond, try using code search:

1. Turn on the TV. 2. Press and hold the SET-UP key until the LED blinks and stays on, then release the button. 3. Press the channel up button slowly and repeatedly (can take 60 or more times) until the channel changes. 4. Press ENTER to lock in the code.

Note: If you pass the code, press the CH- key to go backward through the library until the TV changes channels again, then press ENTER to lock in the code. You can identify the code for future use with the following step.

Code Identification: 1. Turn on the TV. 2. Press and hold the SET-UP key until the LED blinks and stays on. 3. Press the SET-UP key again and release. 4. Slowly press each number key from 0 to 9. When the LED blinks, that is the first digit of your code. Repeat step
4 to find the next digit and repeat once more for the third digit.

To return the Remote to Factory Setting:
1. Press and hold SETUP until the LED stays on. 2. Press CC.

New feature for digital channels that use or
LG………………………..710 Samsung…………………711 RCA………………………717, 718, 719, 720, 710 Philips…………………….712, 721, 722 Element…………………..731 Hisense……………………725 Insignia……………………729

See next page for all codes:
ONN……………………….727 Sceptre…………………….732 TCL……………………….723,724 Toshiba……………………728 Vizio………………………726 Westinghouse……………..730,731

Copyright© 2025, Command In Hand Inc.

Rev. 5-24-2024