• 3-Circuit (1-10V / DALI) Track System
• Surface Mounted and Recessed options available
• Various components for customization
• Electrical, mechanical, and thermal compatibility must be ensured
• Contact Bright Light for technical support

Product Usage Instructions

Installation Guide
When installing the 3-Circuit Track System, follow these steps:

1. Ensure you are using components belonging to this track system only.
2. Mount the track system according to the provided instructions for either surface mounted or recessed installation.
3. Test all connections and electrical lines before attaching any fixtures.
4. Check for electrical, mechanical, and thermal compatibility with attached fixtures.

Safety Precautions
For safety reasons, please note the following:

• Do not use components not belonging to this system.
• Ensure proper installation according to the instructions provided.
• Contact the manufacturer for any technical queries or support.

• Q: Can components from other track systems be used with this product?
  A: No, only components belonging to this specific track system should be used to ensure safety and functionality.
• Q: How should I test the connections before attaching fixtures?
  A: Use a multimeter or consult an electrician to ensure all connections are properly established and functioning.
• Q: Are there any specific maintenance requirements for this system?
  A: Regularly check for loose connections, dust accumulation, and signs of wear to maintain optimal performance.