BRiGADE Safety Camera User Manual

BRiGADE Safety Camera

Product Information

The BL-2730M is a mirror monitor that supports CVBS/AHD 720P/AHD 1080P. It comes with a 7-inch new TFT panel screen with an aspect ratio of 10:9 image. The monitor has 2-channel video input with 2 trigger cable inputs and can auto switch between PAL and NTSC systems. It has a resolution of 1024 x R.G.B x 600 and a brightness of 450cd/m2. The power supply required for the monitor is 12-24V DC. The kit includes a BL-270HM 2 Channel Mirror Monitor, a BL-270HM-BKT Dash-mount bracket, and a BL-270HM-PC 2CH Video Input, 2 x alarm trigger inputs, Power and GND.

Product Usage Instructions

1. Connect the Power and GND cables to Negative12-24V to positive.
2. Connect AV1 – AV2 cables to camera 1 and camera 2.
3. Connect Trigger AV1 – Trigger AV2 cables to trigger the video AV1AV2.
4. Use the Menu Tree to customize the view, system settings, and default settings as per your requirements.

Note: Channel 1 video has priority over Channel 2 video if these are triggered at the same time.
For more information, technical documents or support, please visit https://brigade-electronics.com/product-support-area/ or contact technical support at technical@brigade-electronics.com.

Kit Contents

Mirror Monitor

1. Power
2. Up
3. Menu
4. Down
5. Channel 1/ Channel 2
6. IR

Monitor Specification

• Screen size: 7-inch new TFT panel
• Aspect Ratio: 10:9 image
• Input: 2-channel video input with 2 trigger cable inputs .
• System: PAL and NTSC auto switching
• Resolution: 1024 x R.G.B x 600
• Brightness: 450cd/m2
• Power supply: 12-24V DC
• Built-in speaker
• Operation Temperature: -30℃~+70℃
• Storage Temperature: -40℃~+80℃.

Cable

Note: Channel 1 video has priority over Channel 2 video if these are triggered at the same time.

Usual manual

1. Power connected, GND to Negative；12-24V to positive。
2. AV1 – AV2 connect to camera 1 and camera 2。
3. Trigger AV1 – Trigger AV2 cables to trigger the video AV1、AV2

Wiring Diagram

Menu Tree

View

• Brightness：0-100
• Saturation：0-100
• Contrast：0-100
• Hue：0-100

System

• Reversing Line： MODE 1(2/3)
• Astern Delay ：3s/6s/9s
• Language： English/Japanese/Chinese
• Rotate： LU/RD
• Version： Shows installed O/S/ Firmware version
• Resolution：720P/1080P/CVBS PAL/CVBS N
• Audio Switch： OFF/ON
• Backlight Mode： OFF/ON
• Default Setting
• Image Mirror
• technical@brigade-electronics.com
• www.brigade-electronics.com
• Please refer to https://brigade-electronics.com/product-support-area/ for more information and technical documents