BRiGADE MDR-641 Mobile Caddy Unit Reader

The MDR-641 Mobile Caddy Unit Reader is a device designed to read data from Brigade’s MDR-641 Mobile Data Recorder. It is used to download and analyze recorded information, such as vehicle speed, location, and driver behavior.

Product Usage Instructions

1. Ensure that the MDR-641 Mobile Data Recorder is installed in the vehicle and recording data.
2. Connect the MDR-641 Mobile Caddy Unit Reader to a computer using the provided USB cable.
3. Visit the Brigade Electronics website at www.brigade-electronics.com/product-support or scan the QR code on the device to access installation instructions in your preferred language.
4. Follow the installation instructions to install the necessary software on your computer.
5. Launch the software and connect the MDR-641 Mobile Caddy Unit Reader to the computer using the USB cable.
6. The software will automatically detect the device and prompt you to download the recorded data.
7. Follow the on-screen instructions to download and analyze the recorded data.
8. When finished, disconnect the MDR-641 Mobile Caddy Unit Reader from the computer and store it in a safe place.

For further assistance, please refer to the product support section of the Brigade Electronics website or contact their customer support team.

Scan

MDR-MCU-R-01

Please follow this link or scan the QR code for installation instructions: www.brigade-electronics.com/product-support

www.brigade-electronics.com

Documents / Resources

BRiGADE MDR-641 Mobile Caddy Unit Reader [pdf] Instruction Manual MDR-MCU-R-01, MDR-641 Mobile Caddy Unit Reader, MDR-641, Mobile Caddy Unit Reader, Caddy Unit Reader, Unit Reader, Reader

References

• User Manual