BOXUXING K62 Smartwatch User Manual

BOXUXING K62 Smartwatch

How to wear it

Please wear the device correctly on your wrist, about one finger away from your wrist, and adjust it to a comfortable position. The following diagram serves as a reference.

Tip: When monitoring heart rate, please wear the device tightly.

How to download and connect the app

1. Press and hold the power button to turn on the device. After entering the main interface, click on “Settings – Download App” and scan the QR code with your phone to download and install the “FitCloudPro” app. You can also scan the “FitCloudPro” QR code below to download and install the “FitCloudPro” app
2. Open the “FitCloudPro” application, select “Search for Devices” on the device page, and then follow the on-screen instructions.
3. How to connect to the BT call function:
   1. For most Android phones, after the watch is correctly connected to the app, a “pairing” pop-up reminder will appear, selecting to pair to K62, and then completing the connection.
      For all IOS phones and some Android phones, after the watch is correctly connected to the app, you should enter the phone settings page, search for and select K62 in the Wireless list, and then click on pairing. After pairing, you can use the BT calling function.

Tips:

1. Please upgrade the application to the latest version for a better experience.
2. It is recommended to use Android 5.0 or iOS 9.0 or higher mobile operating systems.
3. When connecting to an iPhone for the first time, a “pairing” reminder will pop up. Click on pairing andthen push incoming calls and instant messages.
4. When connecting to an Android phone for the first time, a “permission” reminder will pop up. Please follow the instructions and authorize to ensure that all  functions work properly
5. To successfully connect, please turn on your phone’s Wireless, GPS, and network.
6. If the device cannot be searched or connected during use, please reset or turn off the watch and try again.

Operating Instructions

• a. Shortcut page: Swipe down from the homepage to go to the shortcut settings page.
• b. Open the information component interface: slide from the bottom to the top of the main page.
• c. Open the main menu interface: click the button
• d. Open the shortcut page: Slide the watch’s main page from right to left.
• e. Quick access to dial change: Long-press the dial interface for 3 seconds to enter the dial selection interface. Swipe left and right to switch dials, click confirm to switch dials
• F. Power on/off: Press and hold the button for 3 seconds, then click to turn off

DIMENSION

Function

• 100+sports modes: You can choose from 50 sports modes and view detailed sports data in the watch’s sports records.
• Daily activity status: Record the daily steps, distance, and calories. More detailed information analysis and data recording can be viewed in the APP.

Telephone

• Dial pad: You can enter a phone number and make a call.
• Heart rate monitor: measures the current heart rate value. The app can set up scheduled heart rate measurements, and both scheduled heart rate data and real-time test data can be viewed on the app’s heart rate interface

• Sleep Monitor: Test the total sleep time throughout the day. The app can set the sleep time period for the entire day, during which sleep data will be collected and uploaded together with the end time.
• Blood oxygen monitor: detects blood oxygen levels. You can view more detailed information, analysis, and data records in the app. (This value is for reference only and cannot be used as a medical basis
• Weather: Display weather conditions and the weather for the next 5 days. Weather information needs to be connected to the app to obtain data. If the connection is disconnected for a long time, weather information will not be updated.

• Music control: After connecting the phone, the watch can control the playback/pause/previous/next song on the phone, and adjust the volume.
• Message: Instant message reminder, displaying 8 latest messages.
• Alarm clock: You can set 5 alarms, and the watch will vibrate, ring, and display
• Al voice assistant: Click on the Al voice function button, say the wake-up “word” to wake up the Al voice assistant (for example, the wake-up word for Xiaomi phones is “Xiao Ai). Please ensure that the Wireless function connection is successful

Settings: Menu style/Screen display/Battery/Vibration and ringing/Language/QR code/Time settings/System

Other functions:
sedentary reminder, low battery reminder, incoming call reminder, remote photo taking, looking for watch, dial/customized dial, 12/24-hour timing system, unit setting, wrist rotation screen, physiological cycle reminder, goal achievement reminder

Charging

1. Connect the charging cable to the watch charging port, ensuring that the metal pins are fully connected
2. Please use the correct charging adapter with a voltage of 5V and above 0.5A

Attention: If the smartwatch cannot be powered on after being idle for a long time, please clean the charging metal pins to ensure a good connection.

WARNING: Please be aware of potential fire risk, And strictly follow the instructions for charging and storage. For disposal, please check your local authority’ s website to learn more, and in accordance with applicable legal requirements, safely dispose of lithium-ion batteries.