BOWFLEX Treadmill 22 Instruction Manual

BOWFLEX Treadmill 22

If you need assistance, please contact Customer Service (if purchased in US/Canada) or your local distributor (if purchased outside US/Canada). To find your local distributor, go to: www.nautilusinternational.com

This icon means a potentially hazardous situation which, if not avoided, could result in death or serious injury. Read and understand all Warnings on this machine.
Nautilus, Inc., www.NautilusInc.com, 5415 Centerpoint Parkway, Groveport, OH 43125 U.S.A. – Customer Service: North America (800) 605-3369, csnls@nautilus.com | outside U.S. www.nautilusinternational.com | Printed in China | © 2020 Nautilus, Inc. | Bowflex and the B logo are trademarks owned or licensed by Nautilus, Inc., registered or otherwise protected by common law in the United States and other nations. | ORIGINAL DOCUMENT – ENGLISH VERSION ONLY

ASSEMBLY INSTRUCTION

Refer to the Assembly Manual for complete safety instructions.

Assembly Step 1. Attach the Uprights to the Base Assembly, and then Connect the Cables from the Base Assembly to the Right Upright
Note: Do not crimp cables. Do not fully tighten Hardware until instructed.

Assembly Step 7. Attach the Base Shrouds and Outer Junction Covers to the Frame Assembly
Note: Be sure that the Right Base Shroud hides the Cable Connectors. If necessary, push the Cable further into the Right Upright.

Documents / Resources

BOWFLEX Bowflex Treadmill [pdf] Instruction Manual Bowflex, Treadmill, BOWFLEX, Treadmill 10, Treadmill 22, Treadmill 25, Treadmill 56

References

• Nautilus International
• Nautilus, Inc. – A world leader in health and fitness.

Related Manuals / Resources

Hunting Instruction Manual – Optimized PDF Hunting Instruction Manual -Original PDF

Digital Anemometer Instruction Manual
Digital Anemometer Instruction Manual – Download [optimized]Digital Anemometer Instruction Manual – Download

step2bed mini Instruction Manual
step2bed mini Assembly Instructions www.step2health.com www.facebook.com/step2bed 1. Place all parts on a flat working surface. Remove all plastic…

svenlars Montage Instruction Manual
svenlars Montage Instruction Manual www.svenlars.nl Questions? support@svenlars.nl