Botland THP10-B-V2 Smart Bluetooth Gateway Pro User Manual
Product Description
Smart Bluetooth Gateway Pro is the control center of smart home. Bluetooth and Bluetooth Mesh devices can be interconnected with devices on the TUYA platform through the gateway, and use mobile phones to remotely view or control devices, and it can diverse scene automation and provide users with convenient intelligent experience.
Indicator Description
| Product status | Indicator status |
| Wait for distribution network | Red indicator flashing |
| Distribution network successfully | Red indicator off |
| Distribution network fails | Red indicator on |
| Add Sub-device | Blue indicator flashing |
Preparation
- Connect your mobile phone to the Wi-Fi network.
Connect your mobile phone and the gateway to the same network to ensure effective connectivity between them.
- Download and open the App
Search for “Smart Life” in the App store or scan the QR code in the manual to download and install the App. Press the “Register” button register an account if this is your first time use; if you already have an account, press the “Login” button.
【Smart Life】App
Add Device
- Power on the gateway and connect it to the router through the network cable or 2.4G WiFi（The wireless 2.4G WiFi connection mode suggests that the distance between the gateway and the router should be within 6 meters, and there should be no obstacles around).
- Ensure that red indicators of the gateway are flashing. (If reset is required, press and hold the reset button for more than 5s before releasing).
- On the App’s Home page，Click the “+” in the upper right corner to add a device
- Add Manually：Choose “Add Manually”->“Gateway Control”-> “Gateway”->“Wired＆wireless Gateway(BLE)”，add the device to the App as prompted.
- Discovering devices：When gateway icon appears in the “Discovering devices” list，click“Add”button，add the device to the App as prompted.
Instructions
- Add Sub-device
The sub-device can be added after the gateway is successfully added.
Please refer to the instructions on the APP to add the sub-device. - Rest network
Press and hold the gateway button for more than 5 seconds to reset the device. After the initialisation of the device is completed, the device will on distribution network state again, and repeat the steps of [Add Device] - Note:
- Please ensure that your phone is connected to the 2.4GHz Wi-Fi network before adding a gateway.
- In order to make the connection more smooth, please try to keep the phone close to the gateway and ensure that the phone and the gateway are in the same Wi-Fi network.
- If the device fails to be added or is not in the distribution network state after power on, please press and hold the gateway button for more than 5 seconds to reset the device and add it again
Hereby, Ningbo Lingzhu Technology CO., Ltd. declares that this product is in compliance with essential requirements and other relevant provisions of Directive 2014/53/EU,2011/65/EU.
This product must not be disposed of as normal household waste, in accordance with EU directive for waste electrical and electronic equipment (WEEE- 2012/19/EU). Instead，it should be disposed of by returning it to the point of sale, or to a municipal recycling collection point.
FCC Notice:
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
The users manual or instruction manual for an intentional or unintentional radiator shall caution the user that changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. In cases where the manual is provided only in a form other than paper, such as on a computer disk or over the Internet, the information required by this section may be included in the manual in that alternative form, provided the user can reasonably be expected to have the capability to access information in that form.
(b) For a Class B digital device or peripheral, the instructions furnished the user shall include the following or similar statement, placed in a prominent location in the text of the manual:
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
RF exposure warning
This equipment must be installed and operated in accordance with provided instructions and the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provide with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.
Product Specifications
| Product Name | Smart Bluetooth Gateway Pro |
| Product Model | THP10-B-V2 |
| Power input | 5 V 1 AGeneral 5V Direct Current 1A.symbol means direct current |
| Working Temperature | -10℃～+40℃ |
| Working Humidity | 10% to 90% RH (non-condensing) |
| Internet Port | 10/100Mbps Ethernet |
| Wireless Protocol | WiFi、Bluetooth |
| Product Size | 90.0 mm x 90.0 mm x 23.0 mm |
| Net Weight | About 74.5 g |
| Frequency band of radio equipment operation | 2400MHZ-2483.5MHZ |
| Maximum output power | WiFi: ≤19dBm (EIRP). Bluetooth: ≤19dBm (EIRP) |
Packing List
- Smart Bluetooth Gateway Pro x 1
- Power cable x 1
- Net cable x 1
- Instruction manual x 1
Please read the instruction manual carefully before using the product
Documents / Resources
 |
Botland THP10-B-V2 Smart Bluetooth Gateway Pro [pdf] User Manual 2A789THP10-B-V2, 2A789THP10BV2, THP10-B-V2 Smart Bluetooth Gateway Pro, THP10-B-V2, Smart Bluetooth Gateway Pro, Bluetooth Gateway Pro, Gateway Pro, Pro |