BOSE AM894538 ArenaMatch Utility AMU Pole Adapter
Product Specifications
- M8 bolts
- M8 hex nuts
- M5 thumbscrew
- 77 mm (3 in)
What In Box
Dimension
- WARNING: Make sure the stand is placed on a stable, level surface.
- WARNING: Refer to all relevant documentation for the pole or stand before attaching the loudspeaker. Make sure the pole or stand can support the weight of the loudspeaker. Once the pole or stand is assembled and the loudspeaker is attached, make sure the whole assembly is stable and does not present a tipping or falling hazard.
- WARNING: Do not attempt to move the whole assembly. Remove the loudspeaker from the pole before moving the stand.
Installation
The AMU Pole Adapter is compatible with all ArenaMatch Utility loudspeakers. To ensure safe product installation, it is the installer’s responsibility to refer to all relevant documentation for this product and all other installation components before installing the product.
Note: The AMU Pole Adapter has not been assessed to EN 54-24.
Note: If using a rear input panel cover, refer to the ArenaMatch Utility loudspeaker installation guide at BoseProfessional.com before continuing.
- Attach the base of the Pole Adapter to the loudspeaker using the included M8 bolts. Tighten all bolts with a 13-millimeter socket tool using a torque not to exceed 13.6 to 20.3 newton·meters (10 to 15 pound·feet).
- Place the top of the Pole Adapter over the base, lacing the screws through the holes. Attach and tighten the included hexnuts onto the screws to secure the bracket in place.
- To mount the loudspeaker to a pole, attach the thumbscrew to the Pole Adapter and place the adapter over the pole. Tighten the thumbscrew to secure.
Note: The AMU Pole Adapter is compatible with 36 mm (1 ⅜ in) poles.
WARNINGS/CAUTIONS
Please read and keep all safety and use instructions. Contains small parts which may be a choking hazard. Not suitable for children under age 3.
- This product is intended for installation by professional installers only! This document is intended to provide professional installers with basic installation and safety guidelines for this product in typical fixed-installation systems. Please read this document and all safety warnings before attempting installation.
- Unsafe mounting or overhead suspension of any heavy load can result in serious injury or death, and property damage. It is the installer’s responsibility to evaluate the reliability of any mounting method used for their application. Only professional installers with knowledge of proper hardware and safe mounting techniques should attempt to install any loudspeaker overhead.
- All Bose Professional products must be installed in accordance with local, state, federal and industry regulations. It is the installer’s responsibility to ensure the installation of the loudspeakers and mounting system is performed in accordance with all applicable codes, including local building codes and regulations. Consult the local authority having jurisdiction before installing this product.
- Use only the hardware and accessories included or specified by Bose Professional.
- Do not mount on surfaces that are not sturdy, or that have hazards concealed behind them, such as electrical wiring or plumbing.
- Do not make unauthorized alterations to this product.
- Do not expose loudspeaker or mounting components to any chemical substances that are not specified by Bose Professional, including but not limited to lubricants, cleaning agents, contact sprays, or other hydrocarbon-based solvents. Exposure to such substances can lead to degradation of the plastic material, resulting in cracking and creating a falling hazard.
- Do not place or install the bracket or product near any heat sources, such as fireplaces, radiators, heat registers or other apparatus (including amplifiers) that produce heat.
EU Importer: Transom Post Netherlands B.V., Keizersgracht 391A, 1016 EJ, Amsterdam | UK Importer: Transom Post Netherlands UK, Squires House 205a High Street, West Wickham, BR4 0PH | Japan Importer: Transom Post International Japan KK Co., Ltd. PMO Tamachi IV Shiba5-29-19, Minato-ku, Tokyo | Australia Importer: Transom Post Australia Pty. Ltd., Level 14, 60 Margaret Street, Sydney, NSW 2000 | China Importer: Transom Post (Shanghai) Audio Co. Ltd Room 2209, Building 1, 175 Longyao Road, Xuhui District, Shanghai | Mexico Importer: POST INTL MEXICO, S. DE R.L. DE C.V. Insurgentes Sur No. 1079, 1st floor, Colonia Noche Buena, Benito Juárez, C.P. 03270, Mexico City | UAE Importer: 102 A, Sama Tower Sheikh Zayed Road, Dubai UAE Bose Professional, 117 South St, Hopkinton, MA 01748 USA Bose is a trademark of Bose Corporation. ArenaMatch is a trademark of Transom Post OpCo LLC. ©2024 Transom Post OpCo LLC. No part of this work may be reproduced, modified, distributed or otherwise used without prior written permission.
Warranty Information
This product is covered by a limited warranty. For warranty details, visit BoseProfessional.com/warranty
©2024 Transom Post OpCo LLC. All rights reserved.
BoseProfessional.com
AM894538 Rev. 00 | June 2024
FAQ
- Q: Is the AMU Pole Adapter compatible with all ArenaMatch Utility loudspeakers?
- A: Yes, the AMU Pole Adapter is compatible with all ArenaMatch Utility loudspeakers.
- Q: What is the torque range recommended for tightening the M8 bolts?
- A: The torque range for tightening the M8 bolts is between 13.6 to 20.3 newton meters.
- Q: Can the AMU Pole Adapter be used with 36mm speaker stands?
- A: Yes, the AMU Pole Adapter is compatible with 36mm speaker stands.
Documents / Resources
 |
BOSE AM894538 ArenaMatch Utility AMU Pole Adapter [pdf] Instruction Manual AM894538, AMUPOLEAT, AM894538 ArenaMatch Utility AMU Pole Adapter, AM894538, ArenaMatch Utility AMU Pole Adapter, Utility AMU Pole Adapter, Pole Adapter, Adapter |