BOSE 402 Series V Loudspeaker Preset Update Procedure
Specifications
- Model: 402 and 802 Series V Loudspeaker Presets
- Compatibility: EX or ESP processor, PowerMatch, PowerShareX, or PowerShare-D amplifier
- ControlSpace Designer Version Compatibility: 5.14.0 or earlier
Product Usage Instructions
Manual Update of Loudspeaker Preset:
- Download the loudspeaker presets 402_802, unzip the folder, and store it in an accessible location on your computer.
- Double-click the SpeakerPEQ block within the Signal Processing view of the processor or amplifier in your system.
- If using an EX or ESP processor for loudspeaker optimization, a SpeakerPEQ from the SP Tool Kit will need to be added to your design.
- In the SpeakerEQ control panel, click on the Load Loudspeaker EQ button and navigate to the location on your computer where you stored the 402_802 loudspeaker presets folder.
- Select the 402_SeriesV.seq or 802_SeriesV.seq file according to what is being used in your system and click the Open.
- Your SpeakerPEQ should now be updated with the correct values.
- If using a PM, PS-D, or PSX amplifier, Bandpass and Limiter settings will also be recalled for the loudspeaker.
Note:
You will not be able to use the front panel of PowerMatch amplifiers to recall the 402_SeriesV or 802_SeriesV preset until its firmware has been updated using ControlSpace Designer 5.14.1 or later.
Overview
This guide provides step-by-step instructions for manually updating your EX or ESP processor, or PowerMatch, PowerShareX, or PowerShare-D amplifier with 402 and 802 Series V loudspeaker presets to ensure optimized performance. These instructions apply when using ControlSpace Designer version 5.14.0 or earlier.
Note: The 402 and 802 Series V loudspeaker presets are automatically included with ControlSpace Designer version 5.14.1 or later.
Presets are available for download at:
- https://www.boseprofessional.com/en-us/products/software/signal-processing/controlspace-design er.html#v=controlspace-designer
Instructions for Manual Update of Loudspeaker Preset
- Download the loudspeaker presets 402_802, unzip the folder, and store it in an accessible location on your computer.
- Double-click the SpeakerPEQ block within the Signal Processing view of the processor or amplifier in your system.
- If using an EX or ESP processor for loudspeaker optimization, a SpeakerPEQ from the SP Tool Kit will need to be added to your design.
- In the SpeakerEQ control panel, click on Load Loudspeaker EQ button and navigate to the location on your computer where you stored the 402_802 loudspeaker presets folder.
- Select the 402_SeriesV.seq or 802_SeriesV.seq file according to what is being used in your system and click the Open.
- Your SpeakerPEQ should now be updated with the correct values.
- If using a PM, PS-D, or PSX amplifier, Bandpass and Limiter settings will also be recalled for the loudspeaker.
- Note: You will not be able to use the front panel of PowerMatch amplifiers to recall the 402_SeriesV or 802_SeriesV preset until its firmware has been update using ControlSpace Designer 5.14.1 or later.
Date: December 2024
Classified as Public
FAQs
Q: Where can I download the loudspeaker presets?
A: The presets are available for download at:
https://www.boseprofessional.com/en_us/products/software/signal_processing/controlspace_designer.html#v=controlspace_designer
Q: What version of ControlSpace Designer is required for automatic inclusion of the presets?
A: ControlSpace Designer version 5.14.1 or later automatically includes the 402 and 802 Series V loudspeaker presets.
Documents / Resources
 |
BOSE 402 Series V Loudspeaker Preset Update Procedure [pdf] User Guide 402 Series V, 802 Series V, 402 Series V Loudspeaker Preset Update Procedure, 402 Series V, Loudspeaker Preset Update Procedure, Preset Update Procedure, Update Procedure, Procedure |