Bromech LOGO

Bromech JE21 Digital Price Computing Scale

Bromech JE21 Digital Price Computing Scale

Instruction manual

Warning indicators

  • ” EEr” means system parameter fault, please contact after-sales service station
  • When total amount exceeds 9999.99, display amount as “——“
  • When scale is overloaded, display weight reading as “——“
  • Low power indicator light or ff] flash, means battery power is low. The scale can be used for a short period of time. Please charge as soon as possible.
  • Display ” LO” when switching on, means battery power is too low to work. Please charge as soon as possible.

How to charge

  • Low power indicator “Lo” or” ffi • flash, means battery power is low and need to charge. Connect the adaptor plug to power source and the other end connect DC socket of the scale.
  • Charging when scale power off.
  • Display weight flash as”—-” during charging, when it stop flash and display”—-” stably means the battery will be full after 2 hours.
  • Charging when scale power on. (For JC models only) Status icon” rn • • – • flash during charging, when it stop flash means the battery will be full after 2 hours.
  • Please make sure the scale switched on when charging.

Care and maintenance

  • Keep the scale away from rain and avoid water getting inside the scale.
  • DO NOT store the scale in high temperature or high humidity area.
  • DO NOT strike, shock or overload the scale.
  • DO NOT reverse polarity of the storage battery (Connect red wire to red port, and blue wire to blue port). Manufacturer Service Line: 626-515-7909

Technical Specifications

  • Power supply: CD AC 11 o-22ov / 50Hz
  • DC 4V/4Ah (with built-in rechargeable storage battery) ® 3 X D size batteries (For G models only)
  • Auto zero when switch on, auto-trail zero point
  • 1-99 add on result memories
  • Five different unit price memories (Only 4 unit price keys for product with LCD)
  • Working temperature: o·c – +40°C
  • Relative humidity: ,;;;as% RH
    • ?.Capacity: 6kg\15kg\30kg
    • Division: 2g\5g\10g
  • Tolerance grade

Operation

Place the scale on a flat and solid platform; adjust the 4 feet screws to make sure the scale is horizontal; place on specialized plate (if necessary) and switch on the scale. Do not use under TARE mode, for long time or the scale can not trail zero point automatically. e Key illustration

  • [ON/OFF] Switch on/off. Start weighing when “Zero”, ” stable ” symbols appear. Press this key to switch off the scale after use.
  • [Zero] Reset weighing reading to zero (applicable when weight reading 4% full capacity)
  • [Tare] Reset weighing reading to zero (“Tare” symbol appears)
  • [Key 0-9] Input digit. If no operation for 3 seconds, pressing these keys can clear the current digit and input new digit
  • [.] Input decimal of the unit price
  • [CJ Clear the unit price or amount
  • (M+]
  • During weighing, press this key to add on the amount. “add on the symbol ” appears, the weight reading display window shows “Add”, unit price display window shows add on times, and the amount display window shows the total amount. If the amount is zero, this key is not applicable.
  • Press any digit key to exit the current add-on operation (but the add-on result will be memorized) and back to weighing mode.
  • If no weighing, press this key to see the add-on amount. The weight reading display window shows “tot”, the unit price display window shows total add-on times, amount display window shows the total amount. Press any digit key to exit the current add-on operation (but the add on the result will be memorized) and back to weighing mode.
  • (MC] Clear memorized add-on result. Exit add-on mode, “add-on symbol ” disappears.
  • ( change ] Activate money change function. Weight reading display kg-lb window shows “-CHA-“, amount display window shows”——“.
  • Press digit keys to input the amount of received money (press (C] to clear input), and the amount display window will show the amount
  • Give of change. Press the ( change ] key again to exit the Change function kg-lb and back to weighing mode.
  • Under weighing mode, press this button for 3 seconds. The scale will beep, meaning unit conversion is activated. LCD shows the current weight unit.
  • (Light] Turn on/off the LCD backlight. (Only applicable for products with backlight)
  • (M 1] ~ (M 5] Display pre-set unit price. (Only 4 unit price keys for product with backlight)

To set unit price memory

After switching on, press (Enter] key, Weight reading display window shows “SET”, unit price display window shows”——“. Press one of the unit price key (M X] , weight reading display window shows “SET-X”, unit price display window shows the unit price already set before. Then press digit keys to input unit price needed, and press (Enter] to finish setting.

FAQS

How long does a charge last?

After a full charge, it could last 30 days if you use it three times a day.

What can be done if the scale cannot be charged?

Please kindly note, that to charge this scale:
1. Please use the original USB-C charging cable or other USB-C cables (must be USB-C)
2. Please do not use any fast-charging brick.

How high and wide are the numbers in the display?

The photo in the ad, shows that. EASY to read for sure. YOU won’t be disappointed with this product. The plate you have to put your items on to weigh, sits where you can see the numbers very clearly. Buy with confidence.

Is the 300mAh rechargeable battery replacable should it wear out?

It is not replaceable.
Our products have strict quality control. The scale’s lifespan would not be too short under proper maintenance. For example, please do not use it somewhere pretty humid(it is IPX6 waterproof. This suggestion is just for better maintenance. There is no need to worry about its ability in waterproofness) or dusty. Any issue occurs within the 2-year warranty, just feel free to contact us. We would absolutely give you a satisfactory solution.

Where can I buy a replacement charging cord?

Is the 300mAh rechargeable battery replaceable should it wear out?

what is size of scale area, not including display?

It easily accommodates a 6″ plate without obstructing the display. Anything bigger and I just offset the dish a bit to view the display

Can the scale be used while it is plugged in for charging?

The answer is No. When the scale is being charged, it could not work and would only show a battery icon on the display.

What is the purpose of measuring liquids when recipes state volume measurements and not weight of liquids?

When recipes state volume measurements, you could switch the unit to fl’oz.
Fluid ounces are a unit used to measure volume, or how much space something takes up. This measurement is used for liquid ingredients, like water or milk.

Is this scale good for soap making?

This scale could weigh objects as heavy as 22lb/10kg and as light as 0.1oz/2g in increments of 0.05oz/1g.
We hope it could help you make the most suitable choice.

The customer review photos do not match the product description photos? completely different scale

The customer is me. Descriptions said item is like new. When received, the stainless steel bowl is missing.

Is the rechargeable battery replaceable?

It is not replaceable.
Our products have strict quality control. The scale’s lifespan would not be too short under proper maintenance. For example, please do not use it somewhere pretty humid(it is IPX6 waterproof. This suggestion is just for better maintenance. There is no need to worry about its ability in waterproofness) or dusty. Any issue occurs within the 2-year warranty, just feel free to contact us. We would absolutely give you a satisfactory solution. 

VIDEO

References

Leave a comment

Your email address will not be published. Required fields are marked *