BORMANN-LOGO

BORMANN Elite BDS2000 064589 Security Key Case

BORMANN-Elite-BDS2000-064589-Security-Key-Case-PRODUCT

IMPORTANT INFORMATION

  • Keep the cover closed to protect the key box from moisture and water.
  • It is recommended that the dials be rotated weekly to keep them in good working order.

TECHNICAL DATA

Dimensions: L8.7 x D4 x HI 2.2 cm

OPENING THE KEY BOX

  1. Slide the cover to reveal the dials.
  2. Set the dials to the current combination (factory combination: 0-0-0-0).
  3. Open the key box by pushing down button 1 near the dials. (Pic. 1)
  4. After closing the cover, make sure to protect the current combination by setting the dials to a random combination.
  5. Close the cover.

SETTING A COMBINATION

  1. Open the key box, set the dials to the current combination (factory combination: 0-0-0-0).
  2. Push the RESET button from position A to position B (Pic. 2)BORMANN-Elite-BDS2000-064589-Security-Key-Case-FIG-1
  3. Set the dials to your desired combination.
  4. Push the RESET button back to position A. The new combination is now set.
  5. Close the cover.

MOUNTING

  1. Open the key box. Inside, there are 5 holes in the back of the key box (Pic. 3)BORMANN-Elite-BDS2000-064589-Security-Key-Case-FIG-2
  2. Hold the box against a wall and mark the position of the holes with a pencil. (Fig. 1 – Step 1)
  3. Drill holes into the wall using a masonry drill. (The diameter of every hole should be 6 mm) (Fig. 1 – Step 2)
  4. Place plastic wall plugs into the drilled holes. (Fig. 1 – Step 3)
  5. Fix the key box on the wall with screws. (Fig. 1 – Step 4)BORMANN-Elite-BDS2000-064589-Security-Key-Case-FIG-3
  • The manufacturer reserves the right to make minor changes to product design and technical specifications without prior notice unless these changes significantly affect the performance and safety of the products. The parts described/illustrated in the pages of the manual that you hold in your hands may also concern other models of the manufacturer’s product line with similar features and may not be included in the product you just acquired.
  • To ensure the safety and reliability of the product and the warranty validity, all repair, inspection, or replacement work, including maintenance and special adjustments, must only be carried out by technicians of the authorized service department of the manufacturer.
  • Always use the product with the supplied equipment. Operation of the product with non-provided equipment may cause malfunctions or even serious injury or death. The manufacturer and the importer shall not be liable for injuries and damages resulting from the use of non-conforming equipment.

The instructions manual is also available in digital format on our website www.nikolaoutools.com. Find it by entering the product code in the Search “BORMANN-Elite-BDS2000-064589-Security-Key-Case-FIG-4” field.

FAQ

Where can I find the digital version of the user manual?
The digital version of the user manual is available on our website www.nikolaoutools.com. You can find it by entering the product code in the Search field.

Documents / Resources

BORMANN Elite BDS2000 064589 Security Key Case [pdf] Instruction Manual
BDS2000 064589, BDS2000 064589 Security Key Case, Security Key Case, Key Case, Case

References

Leave a comment

Your email address will not be published. Required fields are marked *