PET24-7-913 UltraVision Self Empty Robot Vacuum and Mop
“
Specifications:
- Model: [Insert Model Number]
- Power Supply: [Insert Power Supply Information]
- Compatibility: iOS, Android
Product Usage Instructions:
Safety Instructions:
It is important to follow these safety instructions to ensure
safe operation of the product:
- Do not charge damaged or leaking battery.
- Keep the bot away from high temperatures and liquid
exposure. - Avoid unintended removal of the bot, which may cause
hazards. - Do not immerse any part of the bot into water or other
liquids.
Usage Guidelines:
Follow these guidelines for proper usage of the product:
- Do not allow the bot to come in contact with property, pets, or
persons. - Avoid using the bot near stairs or balconies.
- Keep the bot away from space heaters, humidifiers, or other
equipment that it can push. - Avoid using the bot with a voltage converter or
transformer.
Maintenance Instructions:
Proper maintenance is essential for the longevity of the
product:
- Clean the bot regularly and ensure it is free from
obstructions. - Avoid pulling the power cord forcefully or around sharp
edges. - Unplug the bot when not in use and before conducting
maintenance.
FAQ:
Q: How do I claim the warranty for the product?
A: To claim your warranty, register your bot at www.bobsweep.com/warranties.
Q: Where can I find additional troubleshooting
information?
A: Additional troubleshooting information and how-to guides can
be found on the bObsweep app and at www.bobsweep.com/ultravision-support.
“`
App Store Google Play
Important Safety Instructions
· UltraVision is not intended for use by persons (including · Periodically inspect the battery pack for any sign of damage
children) with reduced physical or mental capabilities, or or leakage. Do not charge damaged or leaking battery
lack of experience and knowledge, unless under the close packs. Leaks from the battery cells can occur under extreme
supervision of a person responsible for their safety.
usage or temperature conditions. If the liquid gets on the
· The bot is composed of electronic components that in rare skin, wash quickly with water. If the liquid gets into the eyes,
and unintended cases can cause hazards of heating, fire, flush them immediately with clean water for a minimum of
and other malfunctions. And, because the bot is capable of 10 minutes, and seek immediate medical attention.
autonomous movement, his use poses the risk of collision · Do not mutilate or incinerate the battery, as it will explode at
with property, pets, and persons. Unintended removal high temperatures.
of articles — such as small valuables, jewelry, or hair of · Do not short-circuit the battery by allowing metal objects
persons or pets lying on the floor — may also occur.
to contact battery terminals or immerse in liquid. Do not
· UltraVision is not a toy. Small children and pets should be subject batteries to mechanical shock.
supervised when the bot is operating.
· Do not dispose of your battery in fire. Old batteries should
· Be aware that the bot moves on its own. Take care when be recycled safely through your local recycler.
walking in the area that it is operating in to avoid stepping · If the floor contains stairs, place physical barriers to block
on it or tripping over it.
off UltraVision and prevent access to the stairs and ensure
· If UltraVision or his charging station has been damaged in safe operation.
any way, do not operate them. Contact our support team for · If the floor contains a balcony, place physical barriers to
further assistance.
block off the bot and prevent access to the balcony and
· Do not let the bot drop. The impact from a drop can damage ensure safe operation.
the SLAM LiDAR.
· If the floor contains equipment, such as a stove, fan,
· Do not use the bot outdoors. And , do not store it in a car.
space heater, or humidifier, remove the equipment before
· Do not expose the bot or his charging station to temperatures operation. There is a risk of injury, accident or malfunction if
higher than 113° F (45° C), moisture, or humidity.
the bot comes in contact and pushes the equipment.
· Store and operate in room temperature environments only. · If the bot passes over a power cord and drags it, there is a
· Only use UltraVision with a 110-120v electric plug. Do not chance an object could be pulled off a table or shelf. Before
use with a voltage converter or transformer. Note: Using using this device, pick up objects like clothing, loose papers,
the bot with a power converter will immediately void the pull cords for blinds or curtains, power cords, and any fragile
warranty. Use of the bot outside of the country where it was objects. Extinguish candles. Shut off space heaters.
initially purchased voids the warranty.
· Do not use the bot to pick up sharp objects, glass, or anything
· UltraVision comes with a North American region approved that is burning or smoking such as cigarettes, matches, or
power supply cord and is designed to be plugged into a hot ashes.
standard household AC power outlet only. Do not use any · Do not operate UltraVision in areas with exposed electrical
other power supply cord or power strip.
outlets on the floor.
· Do not use unauthorized cords or chargers. Use of an · With the exception of the wet mop attachment, do not
unauthorized charger could cause the battery to generate immerse any part of the bot into water or other liquids. Do
heat, smoke, catch fire, or explode.
not use the bot to pick up spills. Do not allow UltraVision or
· Risk of electric shock, use indoors in dry location only. Do his station to become wet.
not handle the bot or his charging station with wet hands; · Do not look directly into the rotating transmitting part (laser)
use only on dry surfaces. Do not use a broken or damaged of the SLAM LiDAR.
power inlet/wire.
· For your safety, do not insert tools, fingers, or other items
· The charging station may be protected with a surge into the rotating part of the SLAM LiDAR.
protector in the event of electrical storms or fluctuations. · Do not use without dust bag and/or filters in place.
· Do not pull or carry the charging station by the cord, close · Do not attempt to disassemble or open the charging station
a door on the cord, or pull the cord around sharp edges other than instructed in this Owner’s Manual. Repairs
or corners. Keep the cord away from heated surfaces. To on the station should only be carried out by our qualified
unplug the cord, grasp the plug, not the cord.
technicians.
· Power the bot OFF and remove him from a power source · Do not expose UltraVision’s SLAM LiDAR to direct sunlight
when you are not using him and before conducting or infrared light.
maintenance.
· Perform the required maintenance per the Owner’s Manual
· Do not open or handle the bot’s charging station when to ensure safe operation of the robot and dock.
plugged into the wall. Unplug first.
Declaration of Conformity
This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications or changes to this equipment. Such modifications or changes could void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
· Reorient or relocate the receiving antenna. · Increase the separation between the equipment and receiver. · Connect the equipment to an outlet on a circuit different from that to which the receiver is connected. · Consult the dealer or an experienced radio/TV technician for help.
Warranty
Every UltraVision purchased from an authorized seller comes with our warranty coverage: · 2-Year Standard Warranty · 5-Year Subsidized Repair Plan · Lifetime of Customer Service
To claim your warranty, register your bot at www.bobsweep.com/warranties.
Contact Us
If you have any questions or concerns, please contact our helpful support team at support@bobsweep.com or 1-888-549-8847. Hours: Monday Friday, 9 a.m. 5 p.m. Pacific Time.
Additional troubleshooting information and how-to guides can be found on the bObsweep app and at
www.bobsweep.com/ultravision-support.
2
3
4
5
6
7
8
Navigating Difficult Obstacles
10
12
Light Status Off Solid Blue
Solid Red
Station Status Powered OFF Ready
Dust Bag not detected / Dust Bag’s opening is closed.
What to do
Plug into the outlet.
Send UltraVision to charge / self-empty.
Insert Dust Bag into the slide and push the tab all the way down to open and line up with the air pathway.
· Remove and open the dustbin to clean and remove heavy congestion.
· Clean the Disposal Vent Aperture on the back of the dustbin. Check the flap for free movement.
· Place UltraVision on the station and press `Charge’ to initiate a self-empty.
If the airpathway does not clear: · Unplug the station, turn the station around to
open the Air Pathway Access Window and remove any congestion from the air pathway. · Place UltraVision on the station again and press `Charge’ to initiate a self-empty.
13
14
Quick Tip:
15
16
Lifting & Moving
17
Part
Charging Station Dustbin Filter Brushes Sensors Front Wheel Battery
Maintenance Frequency
Monthly Monthly Monthly Weekly Weekly Weekly
Replacement Frequency
Every 6 months Every 12 months
Every 24 to 36 months
18
19
20
21
23
24
25
26
Trouble Battery Left/Right Wheel Main/Side Brush Camera Dustbin
Mop Attachment
Edge Sensors Bumper LiDAR Bumper LiDAR Charging Station
User Interface
Electronic Stuck Navigation Localization Settings
Solution Low or disconnected battery. Check connection. Reset, and charge UltraVision.
Left/Right wheel is jammed. Check for obstruction and clean.
Main/side brush is jammed. Remove and clean.
Camera component error. Reset UltraVision (Power OFF and back ON). Dustbin is disconnected or contact points are dirty. Clean contact points and reinsert. Or, the vacuum Motor is jammed. Check for obstruction and clean. UltraVision is trying to mop but the mop attachment is disconnected or contact points are dirty. Check for obstruction and clean. UltraVision is stuck near a cliff, is off ground, or the edge sensors are dirty. Move UltraVision to safety, and clean the edge sensors. Bumper is dirty or jammed. Wipe around the bumper; remove any obstruction. SLAM LiDAR’s bumper is jammed. Check for obstruction and clean. SLAM LiDAR is not clean/lost visibility. Clean the SLAM LiDAR and move UltraVision away from mirrors/metallic surfaces/walls and to the center of the room. Can’t locate the charging station. Replug the charging station and charge UltraVision. UltraVision’s UI/USB port is not responding. Reset UltraVision & ensure the USB port is empty. Electronic component error. Reset UltraVision (Power OFF and back ON).
UltraVision is stuck. Clear away obstacles/clutter/wires & reset UltraVision. UltraVision is not able to navigate. Clear away any clutter/wires & reset UltraVision.
UltraVision can’t self locate on map. Check map accuracy/erase map for remapping. Current room settings don’t match UltraVision’s. Change map settings/schedules.
Step 1 2 3 4 5
6 7
Part(s) Tested
Battery Edge Sensors
Charging Station
Bumpers, Wi-Fi, and Camera Motors (wheels, brushes, vacuum, mop) SLAM LiDAR, Charging and Self-empty Hard Resetting UltraVision
Description
After a full charge, test UltraVision’s battery. Test edge sensors individually. Test charging sensors individually. Test the Wi-Fi module, touch sensors, and camera. Test each of UltraVision’s motors individually. Test UltraVision’s SLAM LiDAR, charging contact points, and self-empty function. Factory reset UltraVision and erase all data.
28
67
38
39
41
42
43
44
46
48
État de LED
État de la station
Ce qu’il faut faire
Désactivé Eteint
Brancher dans la prise de courant.
Bleu
Prés
Envoyer UltraVision pour charger/s’auto-vider.
Rouge uni
Le sac à poussière n’est pas dé- Insérer le sac à poussière dans la glissière et pousser
tecté/l’ouverture du sac à poussière la languette vers le bas pour l’ouvrir et l’aligner avec le
est fermée
passage d’air.
Quick Tip:
49
-Retirez et ouvrez le poubelle afin de le nettoyer et de le débarrasser des encombrements importants. -Nettoyez l’orifice d’évacuation situé à l’arrière du dustbin. Vérifiez que le clapet se déplace librement. -Débranchez la station puis ouvrez la fenêtre d’accès au passage d’air pour éliminer les encombrements du passage d’air. – Placez UltraVision sur la station et appuyez « Charge » pour lancer un auto-vide. Si cela ne résout pas le problème: – Débranchez la station, retournez la station pour ouvrir la voie d’accès à air. Accédez à la fenêtre et supprimez tout congestion. – Placez UltraVision sur la station et appuyez « Charge » pour lancer une auto-vide.
Quick Tip:
51
52
Partie
Poubelle et Station Filtre Brosses Capteurs Roue avant Batterie
Maintenance recommandé
Au mois Au mois Chaque semaine Chaque semaine Chaque semaine
Replacement Frequency Tous les 6 mois Tous les 12 mois
Tous les 24 à 36 mois
53
54
55
56
57
59
60
61
62
Trouble Battery
Solution
Batterie faible ou déconnectée. Vérifier la connexion. Réinitialisez et chargez UltraVision.
Left/Right Wheel La roue gauche/droite est bloquée. Vérifier qu’il n’y a pas d’obstruction et nettoyer.
Main/Side Brush La brosse principale / latérale est obstruée. Retirer et nettoyer.
Camera
Erreur de composant de la caméra. Réinitialisez UltraVision (Éteignez et allumez UltraVision).
Dustbin Mop Attachment Edge Sensors
Poubelle est déconnectée ou les points de contact sont sales. Nettoyez les points de contact et remettez-les en place. Ou le moteur d’aspiration est bloqué. Vérifier qu’il n’y a pas d’obstruction et nettoyer.
UltraVision essaie de nettoyé mais l’accessoire est déconnecté ou les points de contact sont sales. Vérifier qu’il n’y a pas d’obstruction et nettoyer. UltraVision est coincé près d’un bord, ou n’est pas en contact avec le sol ou les capteurs de bord sont sales. Mettez UltraVision en sécurité et nettoyez les capteurs de bord.
Bumper
Le Bumper est sale ou bloqué. Essuyez autour du bumper ; éliminez toute obstruction.
LiDAR Bumper LiDAR Charging Station
Le bumper du SLAM LiDAR est bloqué. Vérifiez qu’il n’y a pas d’obstruction et nettoyez-le. Le SLAM LiDAR n’est pas propre/perte de visibilité. Nettoyez le SLAM LiDAR et éloignez UltraVision des miroirs/des surfaces métalliques/des murs et placez-le au centre de la pièce. Impossible de localiser la station de recharge. Rebranchez la station de charge et chargez.
User Interface Electronic
L’interface utilisateur de UltraVision/le port USB ne répond pas. Réinitialisez UltraVision et assurezvous que le port USB est vide.
Erreur de composant électronique. Réinitialisez UltraVision (Éteignez et allumez UltraVision).
Stuck Navigation Localization Settings
UltraVision est coincé. Éliminez les obstacles,et les fils et réinitialisez UltraVision. UltraVision ne peut pas naviguer. Éliminez les encombrements et les fils et réinitialisez UltraVision.
UltraVision ne peut pas se repérer sur la carte. Vérifier l’exactitude de la carte/effacer la carte pour la refaire. Les paramètres actuels de la chambre ne correspondent pas à ceux de UltraVision. Modifier les paramètres/horaires de la carte.
Etape 1 2 3 4 5
6
7
Partie (s) Tésté
Battery Edge Sensors Charging Station
Bumpers, Wi-Fi, and Camera Motors (wheels, brushes, vacuum, mop) SLAM LiDAR, Charging and Self-empty
Hard Resetting UltraVision
Description
Après une charge complète, testez la batterie de UltraVision.
Testez les capteurs de bord.
Tester les capteurs de charge.
Testez le module Wi-Fi, capteurs tactiles et caméra
Test chacun des moteurs de UltraVision individuellement.
Testez le SLAM LiDAR de UltraVision, les points de contact de charge et la fonction d’auto-vidage. Réinitialisez UltraVision aux paramètres d’usine et effacez toutes les données.
64
70
Documents / Resources
 |
bObsweep PET24-7-913 UltraVision Self Empty Robot Vacuum and Mop [pdf] Owner's Manual PET24-7-913 UltraVision Self Empty Robot Vacuum and Mop, PET24-7-913, UltraVision Self Empty Robot Vacuum and Mop, Self Empty Robot Vacuum and Mop, Robot Vacuum and Mop, Mop |