BOBOLEE X17 Trackpad Keyboard Case for iPad 10th Generation
Specifications
- Bluetooth standard port 5.2
- Operation Range: within 10 meters
- Modulation Mode: GFSK
- Work Current: <10mA
(During Touch board is working) - Standby Current: <2mA
- Sleep Current: <40uA
- Charge Current: 100mA/200mA (with Backlight)
- Standby Time: >100 days
- Charge Time: 2~3 hours
- Work time: ≥ 30/100hours
(Shut down backlight) - Lithium battery life: 3 years
- Key strength:80+10g
- Key life: 500 million clicks
- Working Temperature: -10℃+55℃
Operations
For the first time use, charge it for 3~4 hours to make sure sufficient power.
Keyboard use:
- Press the switch to power on/off the keyboard.
- Press the buttons “Fn+C” to enter Bluetooth pairing mode, the indicator
will start to flash blue color.
- Open Settings—Bluetooth—My devices. Tap “Bluetooth Keyboard” to connect.
- After paired successfully, the indicator
will be turn Off.
Keyboard Layout
Note: The above is the function reference table, which shall be subject to the actual situation
Features
Home/Esc
Search
Select All
Copy
Paste
Virtual Keyboard On / Off
Touchpad On / Off
Change Language
Previous Track
Play/Pause
Next Track
Lock Screen
Volume –
Volume +
Brightness –
Brightness +
Function key
Backlight adjustment (optional)
Adjust three modes: press once to turn ON the light, press twice to make the light brighter, press three times to turn OFF the light;
Adjusting colorful light colors
Turn ON/OFF colorful breathing backlight
Adjust colorful light speed
Note:
- Operation System: IOS15.0 or above (The device must support Touch feature).
- Tap settings (after successful wireless paired): settings – general – touch pad – tap/double finger auxiliary point (open).
- Sensitivity setup: setting – general – touch pad – tracking speed (adjust to appropriate speed).
- Touch pad (no physical buttons): no “drag” gesture function option.
Indicators Descriptions
![]() |
Press “Caps Lock” on the keyboard, and the indicator turns white. |
![]() |
Press Fn+C to enter Bluetooth pairing mode, the indicator starts to flash blue, after successfully paired, the indicator will be turn OFF. |
![]() |
The indicator is always on during charging, it will turn green or turn off after charging finished. |
![]() |
Flashing blue means “Low Power”. |
Charging precautions
- For the first time use, charge it use only the cable from manufacture.
Charging indicator will turn green or turn off after fully charge.
- When charging, check whether the charging port is powered normally.
Note: Do not charge the keyboard for a long time. Plugging in the keyboard for a long time will deplete its battery life.
Touch pad gestures
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
Features Touch pad gestures Cleaning and maintenance
In order to make your keyboard awesome and easy to use, please keep good use habits and pay attention to protecting the keyboard.
Keyboard and cover care
The keyboard is relatively light and thin. Please be careful not to use it on uneven surfaces to avoid bending the keyboard. Do not apply the liquid directly on the keyboard. Use a lint free cloth dipped in alcohol or mild soapy water to wipe the keyboard and shell for maintenance. Clean your keyboard cover in this way often to make it look great.
Battery maintenance
Operating temperature: the operating temperature of the keyboard is 0 ° C~35 ° C. Lithium battery is very sensitive to high temperature, so keep its surface away from the sun and do not put it in a hot car.
Charging at any time: You can charge the battery at any time even its power is not zero. However, do not charge for a long time, which will reduce the battery life.
Troubleshooting
About Connections
The keyboard only supports Bluetooth connection. Confirm that the keyboard and tablet are paired and connected before use. If the keyboard has the connection delay or input delay:
- Fully charge the keyboard for 3-4 hours.
- Delete all Bluetooth connections on the tablet, eliminate signals interference, turn off the Bluetooth function, and restart the tablet.
- Close and open the keyboard, and press “Fn+C” to reopen the keyboard Bluetooth.
- Open Settings – Devices- My Device, find the “Bluetooth Keyboard” and click to connect.
Use of touch pad
Before using, make sure the touch function is turned on. If the cursor moves randomly, use a lint free cloth dipped in alcohol or mild soapy water to wipe the touch pad. Keep your hands dry during use to avoid incorrect gestures recognized by the touch pad.
Due to the upgrade of the system version or special customization of the APP program, it is normal that some shortcut keys cannot be used due to different functions. Please refer to the product details and function introduction, or consult the merchant customer service
Documents / Resources
![]() |
BOBOLEE X17 Trackpad Keyboard Case for iPad 10th Generation [pdf] Instructions X17, X17 Trackpad Keyboard Case for iPad 10th Generation, Trackpad Keyboard Case for iPad 10th Generation, Keyboard Case for iPad 10th Generation, Case for iPad 10th Generation, iPad 10th Generation, 10th Generation, Generation |