AVM FRITZ! Repeater 600 User Manual

ভূমিকা

The FRITZ! Repeater 600 is a compact device designed to extend the range of your existing wireless network. It operates on the 2.4 GHz band, providing WLAN N connectivity at speeds up to 600 Mbps. This repeater supports Mesh WiFi, ensuring stable and seamless connections throughout your home or office network. Its compact design allows for discreet placement in any standard power socket.

প্যাকেজ বিষয়বস্তু

• 1 x FRITZ! Repeater 600
• দ্রুত ইনস্টলেশন গাইড

Image: The FRITZ! Repeater 600 packaging, showing the device and branding.

নিরাপত্তা নির্দেশাবলী

• Ensure the device is plugged into a properly grounded power outlet.
• ডিভাইসটিকে আর্দ্রতা বা চরম তাপমাত্রায় প্রকাশ করবেন না।
• ডিভাইসটি খুলবেন না casinছ; যোগ্য কর্মীদের কাছে পরিষেবা প্রদান করুন।
• সরাসরি সূর্যালোক এবং তাপের উত্স থেকে ডিভাইসটিকে দূরে রাখুন।

সেটআপ

1. প্রাথমিক স্থান নির্ধারণ

Plug the FRITZ! Repeater 600 into a power outlet located between your existing wireless router and the area where you want to improve WiFi coverage. The repeater's LED indicator will help you find an optimal position.

2. WPS Configuration (Recommended for FRITZ!Box and WPS-enabled routers)

1. Plug the FRITZ! Repeater 600 into a power outlet. Wait for the LED to indicate readiness (typically a slow blink or solid light).
2. আপনার ওয়্যারলেস রাউটারের WPS বোতাম টিপুন।
3. Within two minutes, press the 'Connect' button on the FRITZ! Repeater 600.
4. The LED on the repeater will flash rapidly during the connection process and then become solid when successfully connected.

Image: A hand pressing the 'Connect' button on the FRITZ! Repeater 600, which is plugged into a wall socket.

3. Manual Configuration (if WPS is not available or fails)

1. Plug the FRITZ! Repeater 600 into a power outlet.
2. Connect a computer, tablet, or smartphone to the FRITZ! Repeater's default wireless network. The default network key is printed on the bottom of the device.
3. খোলা a web browser and navigate to the repeater's configuration interface (usually http://fritz.repeater or http://192.168.178.2).
4. Follow the on-screen instructions to select your existing wireless network and enter its password.

৭.২. সর্বোত্তম স্থান নির্ধারণ

The LED indicator on the repeater provides feedback on the signal quality. A solid green light typically indicates a good connection. If the light is orange or red, consider moving the repeater closer to your main router until a stable green light is achieved. This ensures the best possible extension of your WiFi signal.

Image: An illustration depicting a multi-story house with FRITZ! Repeaters strategically placed to extend WiFi coverage to different rooms and floors.

অপারেশন

LED সূচক

The LED on the front of the FRITZ! Repeater 600 provides visual status information:

• কঠিন সবুজ: The repeater is successfully connected and providing good signal quality.
• ঝলকানি সবুজ: The repeater is attempting to connect or is in WPS mode.
• ঘন কমলা/লাল: The repeater is connected but the signal quality is poor, or there is an issue. Consider repositioning the device.
• বন্ধ: The device is not powered on or is in a power-saving state.

ছবি: একটি ক্লোজ-আপ ফ্রন্ট view of the FRITZ! Repeater 600, highlighting its compact design and the LED indicator light.

Mesh WiFi Functionality

When used with a FRITZ!Box or another Mesh-enabled router, the FRITZ! Repeater 600 integrates into a Mesh WiFi system. This allows your devices to seamlessly switch between the router and the repeater without losing connection, ensuring optimal performance as you move around your network.

রক্ষণাবেক্ষণ

• পরিষ্কার করা: Disconnect the repeater from the power outlet before cleaning. Use a soft, dry cloth to wipe the exterior. Do not use liquid cleaners or solvents.
• ফার্মওয়্যার আপডেট: Periodically check the AVM website for firmware updates for your FRITZ! Repeater 600. Updates can provide performance improvements, new features, and security enhancements.
• বায়ুচলাচল: Ensure the repeater is not covered and has adequate airflow around it to prevent overheating.

সমস্যা সমাধান

No Connection / Poor Signal

• Reposition the Repeater: If the LED indicator is orange or red, move the repeater closer to your main wireless router.
• শক্তি পরীক্ষা করুন: Ensure the repeater is securely plugged into a working power outlet.
• Verify Router Settings: Confirm that your main wireless router is powered on and broadcasting a WiFi signal.
• সংযোগ পুনঃস্থাপন করুন: Try the WPS configuration process again. If unsuccessful, attempt manual configuration via a web ব্রাউজার
• Default Network Key: If connecting directly to the repeater for manual setup, ensure you are using the correct default network key printed on the device.

ডিভাইস রিসেট করা হচ্ছে

If the repeater is unresponsive or you wish to revert to factory settings, a factory reset may be necessary. Consult the full manual or AVM support website for specific reset instructions, as this typically involves pressing and holding a small reset button for several seconds.

স্পেসিফিকেশন

Image: The FRITZ! Repeater 600 shown with its physical dimensions: 3cm height, 6.4cm width, and 6.4cm depth.

ওয়ারেন্টি তথ্য

Specific warranty details for the FRITZ! Repeater 600 are not provided in the available product data. Please refer to the official AVM website or your purchase documentation for comprehensive warranty terms and conditions.

সমর্থন

Detailed support contact information is not provided in the available product data. For technical assistance, further documentation, or customer service, please visit the official AVM webসাইট বা আপনার খুচরা বিক্রেতার সাথে যোগাযোগ করুন।