PowerXcel SOU-12/6000

PowerXcel 6-Outlet Wall-Mounted Power Center User Manual

Model: SOU-12/6000

পণ্য ওভারview

The PowerXcel 6-Outlet Wall-Mounted Power Center is designed to expand your electrical and charging capabilities from a single wall outlet. It provides six standard AC outlets and two USB charging ports, along with a convenient device holder. This unit plugs directly into an existing wall outlet, offering an organized solution for powering and charging multiple electronic devices.

PowerXcel 6-Outlet Wall-Mounted Power Center with side outlets and front USB ports

Image: The PowerXcel 6-Outlet Wall-Mounted Power Center, showing its compact design with three AC outlets on each side and two USB ports on the front, along with a device holder.

সেটআপ নির্দেশাবলী

ইনস্টলেশন

  1. Identify a suitable wall outlet: Ensure the outlet is a standard 3-prong grounded receptacle.
  2. Plug in the Power Center: Align the prongs of the PowerXcel unit with the wall outlet and firmly push it in until it is flush with the wall.
  3. Optional Stability Screw Installation: For enhanced stability, especially in high-traffic areas or with heavier devices, you can utilize the included stability screw.
    • Locate the screw hole in the center of the Power Center, typically below the USB ports.
    • Remove the existing screw from the wall outlet's faceplate (if present).
    • Insert the provided stability screw through the Power Center's designated hole and into the wall outlet's screw receptacle.
    • Tighten the screw gently with a screwdriver until the Power Center is securely fastened to the wall. Do not overtighten.
Back of PowerXcel Power Center packaging showing the stability screw and prongs

Image: The back of the product packaging, illustrating the included optional stability screw and the unit's electrical prongs for wall mounting.

অপারেটিং নির্দেশাবলী

Using the Outlets and Ports

সামনে view of PowerXcel Power Center showing USB ports and device holder

ছবি: একটি সরাসরি সম্মুখভাগ view of the PowerXcel unit, highlighting the two USB charging ports and the pull-out device holder.

রক্ষণাবেক্ষণ

To ensure optimal performance and longevity of your PowerXcel Power Center, follow these simple maintenance guidelines:

সমস্যা সমাধান

If you encounter issues with your PowerXcel Power Center, refer to the following common troubleshooting steps:

সমস্যাসম্ভাব্য কারণসমাধান
No power from AC outlets or USB ports.
  • Unit not fully plugged into wall outlet.
  • ওয়াল আউটলেট কাজ করছে না।
  • Overload on the Power Center.
  • Ensure the Power Center is firmly seated in the wall outlet.
  • Test the wall outlet with another device to confirm it is live.
  • লোড কমাতে কিছু ডিভাইস আনপ্লাগ করুন।
USB devices not charging or charging slowly.
  • USB কেবলটি ত্রুটিপূর্ণ।
  • Device requires more power than 2.1A.
  • ডিভাইসটি সামঞ্জস্যপূর্ণ নয়।
  • একটি ভিন্ন USB তারের চেষ্টা করুন.
  • Verify device charging requirements.
  • নিশ্চিত করুন যে ডিভাইসটি স্ট্যান্ডার্ড USB চার্জিংয়ের সাথে সামঞ্জস্যপূর্ণ।
Device holder does not support my device.
  • Device is too large or too thick (e.g., with a bulky case).
  • The device holder is designed for standard-sized smartphones and smaller tablets. Larger devices or those with thick cases may not fit.

স্পেসিফিকেশন

বৈশিষ্ট্যবিস্তারিত
মডেল নম্বরSOU-12/6000
মোট এসি আউটলেট6
মোট ইউএসবি পোর্ট2
ইউএসবি আউটপুট2.1A Rapid Charge
ভলিউমtage240 ভোল্ট
পণ্যের মাত্রা6.6 x 2.3 x 6.2 ইঞ্চি
আইটেম ওজন8.8 আউন্স
প্রস্তুতকারকA2Z Products, Inc
বিশেষ বৈশিষ্ট্যUSB Slot, Device Holder

ওয়ারেন্টি তথ্য

Specific warranty details for the PowerXcel 6-Outlet Wall-Mounted Power Center are typically provided with the product packaging or can be obtained directly from the manufacturer. Please refer to the documentation included with your purchase for comprehensive warranty terms and conditions. Generally, products are covered by a limited manufacturer's warranty against defects in materials and workmanship.

কাস্টমার সাপোর্ট

For technical assistance, product inquiries, or warranty claims, please contact the manufacturer, A2Z Products, Inc. Refer to the product packaging or the manufacturer's official webসর্বশেষ যোগাযোগের তথ্যের জন্য সাইট।

সম্পর্কিত নথি - SOU-12/6000

প্রিview Legrand Incara™ Pop Up: Technical Data Sheet & Installation Guide
Discover the Legrand Incara™ Pop Up, a versatile and aesthetic solution for integrating power and data into workstations and meeting rooms. This document provides detailed specifications, dimensions, and installation instructions for the Incara™ Pop Up system.
প্রিview রকেটফিশ RF-HTS3520 দ্রুত সেটআপ গাইড
এই নির্দেশিকাটি রকেটফিশ RF-HTS3520 12-আউটলেট পাওয়ার সেন্টারের জন্য একটি দ্রুত সেটআপ প্রদান করে, এর বৈশিষ্ট্য, প্যাকেজের বিষয়বস্তু এবং সর্বোত্তম কর্মক্ষমতা এবং সুরক্ষার জন্য ব্যবহারের নির্দেশাবলীর বিশদ বিবরণ দেয়।
প্রিview লেগ্র্যান্ড ইনকারা পপ আপ রিট্র্যাক্টেবল পাওয়ার আউটলেট - প্রযুক্তিগত তথ্য এবং ইনস্টলেশন
লেগ্র্যান্ড ইনকারা পপ আপ সিস্টেম, একটি প্রত্যাহারযোগ্য ডেস্ক পাওয়ার এবং ডেটা সমাধানের জন্য বিস্তৃত প্রযুক্তিগত বৈশিষ্ট্য, মাত্রিক তথ্য, ইনস্টলেশন নির্দেশিকা এবং সম্মতি মান।
প্রিview ELKO EP মডুলার ইলেকট্রনিক ডিভাইসের টেকনিক্যাল ক্যাটালগ
টাইম রিলে, ডিমার, পাওয়ার সাপ্লাই, মনিটরিং রিলে এবং আরও অনেক কিছু সহ মডুলার ইলেকট্রনিক ডিভাইসের বিস্তৃত ELKO EP ক্যাটালগটি অন্বেষণ করুন। আবাসিক, বাণিজ্যিক এবং শিল্প অ্যাপ্লিকেশনগুলিতে আধুনিক বৈদ্যুতিক ইনস্টলেশনের জন্য প্রয়োজনীয় উপাদান।
প্রিview Belkin Surge Protector User Manuals and Specifications | 6, 8, and 12-Outlet Models
User manual and detailed specifications for Belkin surge protectors, including 6-outlet (1,080 Joules), 8-outlet (2,500 Joules), and the 12-outlet PivotPlug Surge Protector (BE112230-08) with phone/coax protection and advanced features.
প্রিview পুল ডাউন ক্লোসেট রড সিস্টেমের জন্য ওয়াল মাউন্টেড নির্দেশনা
দেয়ালে লাগানো পুল-ডাউন ক্লোজেট রড সিস্টেমের জন্য বিস্তারিত ইনস্টলেশন নির্দেশাবলী। নিরাপদ সমাবেশের জন্য যন্ত্রাংশের তালিকা, চিত্র এবং নোট অন্তর্ভুক্ত। ৬০ পাউন্ড লোড ক্ষমতা, স্টেইনলেস স্টিল, ৩৫-৪৬.৫ ইঞ্চি সামঞ্জস্যযোগ্য, সফট-ক্লোজ এবং দ্বি-মুখী বাফারিং বৈশিষ্ট্য।