BLUETTI MP200 Solar Panel User Guide

BLUETTI logoSolar Panel User Guide
Model: MP200

What is in the box

BLUETTI MP200 Solar Panel - the box

How to use

  1. UnfoldBLUETTI MP200 Solar Panel - Unfold
  2. Adjust the kickstandBLUETTI MP200 Solar Panel - Adjust the kickstand
  3.  How to use the kickstand
    Open the kickstand, adjust the angle, stabilize the panel, fold the kickstand.BLUETTI MP200 Solar Panel - kickstand
  4.  Connect to power stationBLUETTI MP200 Solar Panel - power station

Note:
Use ONLY ONE MP200 solar panel with EB3A/EB55.
Whether connected in series or parallel, make sure the total voltage of solar panels is under the power station’s input voltage limit.

Attention

Regular inspection and maintenance are required to prolong the lifespan of solar panels.

BLUETTI MP200 Solar Panel - panels

Warning:
Do not use solar panels in extreme weather conditions like thunderstorms, floods, typhoons, etc.
Always use solar panels within the specified temperature range (14-149°F/-10-65°C).

Technical details

MP200
Maximum Power(Pm) 200W*
Open circuit voltage 22.9V
Short circuit current 11.0A
Cell efficiency 24%
Cell lamination ETFE
Cell type Monocrystalline silicon
Operating temperature 14-149°F/-10-65°C
General
Weight 19.1Ibs / 8.7Kg
Dimensions Unfolded 81.6*26.8*1.3in / 2075*681*35mm
Folded 26.8*21.7*2.5in / 681*553*65mm
Warranty
12 Months

* STC: Irradiation 1000W/m2, cell temperature 25°C, atmospheric mass number AM 1.5, measurement tolerance ±3 % (Pm).

Frequently asked questions

Are the foldable solar modules waterproof?

Yes, the product meet IP67 water proof, which maximize the lifespan of the module, it should not get wet.

What will affect the final conversion efficiency of solar panels ?

The actual solar panel efficiency may be affected by several factors, like weather, sun intensity, shading, panel orientation, temperature, location, dust and dirt. For example, if you live in a place without much sunlight or your panels are covered by shade, you'll get a very low output or none at all.

Is the BLUETTI' s solar panel compatible with the third party' s power station ?

Yes. Make sure BLUETTI solar panels' voltage is compatible with your power stations' voltage limit, while you're using the same connector. Please feel free to contact us for compatibility with other power stations.

FlinQ FQC8241 Portable Air Compressor - Icon 5
Company: POWEROAK GmbH
Address: Lindwurmstr. 114, 80337
München Germany
Mail: logi@bluetti.de
BLUETTI MP200 Solar Panel - icon2
Company: POWEROAK ENERGY UK CO.,LTD
Address: Unit 2, North Gate, Bolsover Business Park,
Woodhouse Lane Chesterfield England S44 6BD
Mail: poweroak.eu@bluetti.com

BLUETTI MP200 Solar Panel - icon

BLUETTI logoContact Us: www.bluettipower.com
service@bluettipower.com

Documents / Resources

PDF thumbnailMP200 Solar Panel
User Guide · MP200 Solar Panel, MP200, Solar Panel, Panel
PDF thumbnailMP200 Solar Panel
User Guide · MP200, EB3A, EB55, MP200 Solar Panel, MP200, Solar Panel, Panel

Ask a Question

Use this section to ask about setup, compatibility, troubleshooting, or anything missing from this manual.

Ask a Question

Ask about setup, compatibility, troubleshooting, or anything missing from this manual. Name and email are optional.