Bluetooth Headset User Manual
Bluetooth Headset
BH-M97

Product Overview

Product Overview

Package Contents:

  • A. Bluetooth Headset BH-M97 x 1
    Bluetooth Headset
  • B. Charge Base x 1
    Charge Base
  • C. Micro USB charging
    Micro USB charging cable
  • D. User manual x 1
    User manual

Basic Operation

Button

Function

Operation

MFB

Power On

In off status,Long press 1-3 seconds MFB to power on.

Power Off

In on status,Long press 5 seconds to power off

Enter into Pairing Mode

In off status,Long press 5-8 seconds to enter into pairing mode. Or under unconnected standby mode, double press the MFB to enter into pairing mode.

Play / Pause

Short press when play music.

Redial a call

Double press MFB to dial the last call.

Reconnect

When there is a pairing record, power on and enter into reconnect state or short press MFB to reconnect under pairing mode.

Voice Dialing

Long press 1 second MFB then release

Audio Switch

Long press 1 second MFB to switch the audio between phone and Bluetooth headset.

Answer a call

Short press (when call coming)

Hang up a call

Short press ( during a call )

Reject a call

Long press 1 second (when call coming)

Volume +

Volume Up

Short press

Next Song

Long press for 1 seconds

Volume –

Volume Down

Short press

Previous Song

Long press for 1 seconds

Bluetooth Pairing and Connection

  1. In off status,Long press 5-8 seconds to enter into pairing mode with LED Blue & Red flash alternately.
  2. Search and click to connect “ BH-M97” on your phone Bluetooth lists, LED change to LED Blue flash after connected, now you can play music from phone to headphone.
  3. You can press MFB/ volume+ / volume- on the Bluetooth headset to control the answer/hang up a call and play/pause of the music, next and previous songs, volume up and down.
Pairing

Pairing Instructions

Pairing: In off status,Long press MFB 5-8 seconds to enter into pairing mode with LED Blue & Red alternately flash.

Connection

Connection Instructions

Connection: Search and click to connect “ BH-M97” on your phone Bluetooth lists

Connection with Two devices

  1. Follow part 3 to connect with first phone, then turn off the Bluetooth function of first phone.
  2. Double press MFB to pairing mode again with Red & Blue LED flash alternately.
  3. Search and click to connect “BH-M97” on your second phone Bluetooth lists, LED change to Blue LED low flash after connected.
  4. Turn on Bluetooth function of first phone, click to reconnect “BH-M97”on Bluetooth lists. Headset connected with two phones now.

Connection with Two devices

Notes:
Music only can be played from one phone under two connections, when you want to play music from another phone, you need to pause or close the music of the previous phone. The same operation during talking status

LED Indicator

Mode

LED Indicator

Power on

LED Blue flashes 1 second

Power off

LED Red flashes 1 second

Pairing mode

LED Red & Blue flashes alternately

Unconnected standby mode

LED Blue flashes once every 2 seconds

Connected standby mode

LED Blue flashes once every 5 seconds

Playing Music

LED Blue flashes once every 5 seconds。
Talking

LED Blue flashes once every 5 seconds

Delete paired record

Blue and Red LED flashes once at the same time

Charging

Solid LED Red
Full charged

Solid LED Blue

Low battery

Red LED flash

Please charge the BH-M97 at once when the Red LED flash. Charging time about 2 hours. Solid LED Red change to Solid LED Blue when full charged.

Charging

Charge Connections
Please connect to the BH-M97 charging port through the Micro USB charging cable, the charger can be used as car charger, travel charger, computer USB, etc.

Charge Connections

Use of charge Base
Please place the BH-M97 on the charging base, then connect the charging base to USB charger through the Micro USB port for charging.

Use of charge Base

Notes:

  1. Please charge the BH-M97 at least one time every 2 months when don’t use it.

Product Specification

Bluetooth Version

Bluetooth V5.0

Bluetooth Chipset

CSR 8615

Operation Range

10M
Bluetooth Protocols

HSP HFP A2DP AVRCP

CODEC Code

SBC

Battery Capacity

180maH/3.7V
Charging Time

2H

Stand-by Time

200H
Working Time

About 17H (50% Volume)

Headset Net Weight

About 51g
Charge Base Net Weight

About 242g

Headset Dimension

163.21*142.27*48.5mm
Charge Base Dimension

79*73*31mm

Note: *Actual use time will differ from environment and music

Attentions and Q & A

  1. How to reconnect and operation when failed to reconnect ?
    When BH-M97 connected with your mobile phone successfully at the first time, it will search and reconnect the paired device automatically when power on, If failed, please pair and connect again.
  2. How to Delete paired records?
    In Power on state, long press the volume+ and the volumebutton for 5 seconds to clear the pairing record. The indicator Blue and Red LED flashes once at the same time that means the pairing record has been cleared, and the BH-M97 will not connect back to the connected device. When there are various connection problem, try clearing the pairing record firstly.
  3. What’s the password for pairing?
    Some connection devices require password for pairing, pls try 0000 or 8888 or 1111 or 1234.
  4. What devices could charge for the headphone?
    Any car charger, power bank, PC etc which meet DC 5V , charging current more than 500mA could be charge for this item.
  5. Three-way calling function operation
    Call coming during call, short press the MFB to answer the new call and hang up the current call;
    Call coming during the call, double press the MFB to answer the new call and keep the current call;
    Call with a new call coming, long press the MFB for 1 second rejecting a new call.
    When you are on a three-party call, double press the MFB to switch audio between the current call and the keep call.

 

File Downloads

Bluetooth Headset, BH-M97Bluetooth Headset User Manual
Bluetooth Headset, BH-M97
Download [optimized]
Download

Ask a question

Your email address will not be published.