BLUEBOT APP
User Guide

BLUEBOT APPLICATION

1. Fully charge robot
2. Download Bluebot app
3. Steps for registration
4. Connect robot with app (steps)

INSTALLATION BLUEBOT APP

1. Place the robot in the charging station to charge and make sure it’s fully charged before use.
   
2. Remove the robot from the charging station.
3. Make sure the Robot is on, by holding in the ‘On button’ for a few seconds on top of the robot. Wait until the robot has started fully
   
4.  Download the Bleubot app. The app can be found in the Appstore and Google Play.
   
   
5. Register a new account if you are not yet an existing user.
   
6. Open the Bluebot app and press the ‘+ icon’ to add your device.
   
7.  Select the BLUEBOT PRECISION
8. Select your wifi network, enter the password and press confirm.

   
9. After your registration, make sure the robot is removed from it’s charging station.Turn on your Robot by pressing the ‘On button’ . After that is done, press both the ‘Home button’ and ‘On button’ simultaneously for more than 3 seconds untill the robot mentions that it lost it’s wifi connection.
10. Tick ‘Make sure the purple light blinks slowly’ when applicable and press ‘Next
    
11. Press on the ‘Go to connect’ button in the bottom of your screen.
    
12. Select the ‘Smart Life xxx’ network from the list and return to the Bluebot app. Your robot will now connect to the App.
    

Documents / Resources

Bluebot BLUEBOT APP [pdf] User Guide BLUEBOT APP, BLUEBOT, APP

References

• User Manual