0803 Square Hanging Light Box Display
“
Product Specifications:
- Dimensions: 96″ W x 36″ H x 96″ D (2438.4mm x 914mm x
2438.4mm) - Approximate Weight: 179 lbs / 81kg
- Graphic Material: Backlit Textile (dye-sublimated fabric)
Product Features and Benefits:
- 6” aluminum silver frame
- Perimeter LED light bars with internal power supply
- Easy-to-change double-sided SEG push-fit graphics
- Hanging cables included
- UL Certified & ADA compliant sizing for public spaces
- 5-year LED warranty with a long life span of 43,800 hours if
powered 24/7 - Ships in a box or case
Product Usage Instructions:
Installation of SEG Graphics:
- Push the SEG bead into each corner of the frame with your
thumb. - Continue pushing the SEG bead into the middle of the run.
- Work your way around the perimeter of the frame until all
beading is secure. - If needed, go around the perimeter again to ensure proper
installation.
Graphic Removal:
Use the pull tab located on the graphic and gently pull it from
the frame, going around the perimeter.
Graphics Storage & Care:
- Fold graphics with the graphic facing inward and store in a zip
lock/plastic bag. - Spot clean by wiping with a damp white cloth. For washing, use
a commercial size front-loading washing machine with cool water.
Line dry flat. - Avoid dry cleaning to prevent shrinkage.
FAQ:
Q: What tools are required for assembly?
A: You will need a MULTI HEX KEY (INCLUDED), PHILLIPS SCREW
DRIVER (NOT INCLUDED), and 1/2 WRENCH (NOT INCLUDED).
Q: What are the available graphic material options?
A: Two options are available – Backlit Textile (dye-sublimation
printed) and Intensity (UV/LED printed).
“`
Blaze Square Light Box 0803 – Hanging
The BlazeTM Hanging Square 0803is an eye-catching and commanding hanging structure that transforms interior environments such as retail stores, restaurants, workplace offices, tradeshows, and more. This display is suspended from the ceiling and beams from above. The size of this structure is 8′ wide by 8′ long and 3′ tall; each side has fullperimeter light bars. Easily push-fit the double-sided SEG fabric graphic into each side of the frame for a seamless look.
Two backlit graphic material options are available to choose from, Backlit Textile (dye-sublimation printed) and Intensity (UV/LED printed)
features and benefits:
– 6” aluminum silver frame – Perimeter LED light bars attached to the frame feature an internal power supply – Easy-to-change double-sided SEG push-fit graphics – Hanging cables included – UL Certified & ADA compliant sizing; approved for public spaces – 5 year LED warranty on lights; long life span – 43,800 hours for 5 years if powered 24/7 – Comes in a box or case
We are continually improving and modifying our product range and reserve the right to vary the specifi cations without prior notice. All dimensions and weights quoted are approximate and we accept no responsibility for variance. E&OE. See Graphic Templates for graphic bleed specifications 1/22/2025
dimensions:
Hardware Assembled unit:
96″w x 36″h x 96″d 2438.4mm(w) x 914mm(h) x 2438.4mm(d) Approximate Weight: 179 lbs / 81kg
Graphics Graphic material: Backlit Textile (dye-sublimated fabric) See graphic templates for graphic sizes.
Shipping Packing – 5 Boxes: Shipping dimensions: 4 x BOX: 54″L x 9″H x 8″D (1372mm x 229mm x 203mm) 1 x BOX: 48″L x 10″H x 12″D (1220mm x 254mm x 305mm) Approximate shipping weight: 199 lbs / 90.2 kg Packed in optional OCE2 Case: Shipping dimensions: 3 x BOX – 17″L x 63″H x 17″D 431.8mm(l) x 1600mm(h) x 431.8mm(d) Approximate shipping weight: 284 lbs / 128.8 kg
additional information:
Refer to related graphic templates for more information Visit:
https://www.theexhibitorshandbook.com/ downloads/download-graphic-templates or click here
Silver finish only
Tools Required
MULTI HEX KEY (INCLUDED)
PHILLIPS SCREW DRIVER (NOT INCLUDED)
1/2″ WRENCH (NOT INCLUDED)
How to Apply & Remove Graphics
Installation and removal of SEG graphics is easy! Installation: Push the SEG bead into each corner of the frame (1- 4) with your thumb, then push the SEG bead into the middle of the run (5-8) and work your way around the perimeter of the frame until all beading is pushed in properly; if necessary, go around the perimeter again to ensure beading is secure in the extrusion profile.
Note: Keep the set up area clean by using a drop cloth, washing hands before set-up or by wearing gloves. Removal: Use the pull tab located on the graphic and gently pull the graphic from the frame, going around the perimeter.
Graphics Storage & Care
Graphics should be folded with the graphic facing inward and stored in a zip lock /sealable plastic bag. Spot clean by wiping with a damp white cloth. If washing is necessary, use a commercial size front-loading washing machine, gentle cycle with cool water. Line dry flat. Dry cleaning is NOT recommended to prevent shrinkage.
Documents / Resources
 |
BLAZE 0803 Square Hanging Light Box Display [pdf] Owner's Manual IS_blz-h-0803-s, 0803, 0803 Square Hanging Light Box Display, 0803, Square Hanging Light Box Display, Hanging Light Box Display, Light Box Display, Box Display |