BLAUBERG Turbo 200 G Mixed-Flow Inline Fans Owner’s Manual

Turbo 200 G Mixed-Flow Inline Fans

Specifications:

  • Model: Turbo 200 G
  • Connected air duct size: 200 mm
  • Speed: 2 Phases
  • Minimum supply voltage: 230V
  • Maximum supply voltage: 230V
  • Power supply frequency: 50/60 Hz
  • Rated power: 108 W
  • Unit current: 0.48 A
  • Maximum airflow: 1040 m3/h
  • Rotation speed at 50Hz: 830 rpm
  • Sound pressure level LpA at 3 m: 39 dB
  • Weight: 3.95 kg
  • Transported air temperature (max): 60°C
  • Ambient air temperature min: 0°C
  • Ambient air temperature max: 0°C
  • Ingress protection rating: IPX4
  • Ingress protection rating of the drive: IPX4

Product Usage Instructions:

Installation:

  1. Choose a suitable location for installation ensuring proper
    ventilation.
  2. Connect the air duct to the unit following the specified size
    of 200mm.
  3. Ensure the unit is securely mounted to avoid vibration and
    noise.
  4. Connect the unit to the power supply within the voltage range
    of 230V.

Operation:

  1. Turn on the unit using the provided power switch.
  2. Select the desired speed setting based on your ventilation
    needs.
  3. Monitor the airflow and adjust settings as necessary.
  4. Maintain proper maintenance by cleaning filters regularly.

Safety Precautions:

  • Avoid blocking the air duct to prevent overheating.
  • Do not operate the unit in extreme temperatures outside the
    specified range.
  • Ensure the unit is disconnected from power before any
    maintenance tasks.

Frequently Asked Questions (FAQ):

Q: What should I do if the unit makes excessive noise?

A: Check if the unit is securely mounted and the air duct is not
blocked. Clean the unit and ensure proper installation.

Q: Can I adjust the rotation speed of the unit?

A: Yes, you can adjust the speed settings based on your
ventilation requirements.

“`

blaubergventilation.com.au
Turbo 200 G
Mixed-flow inline fans · Sound pressure level LpA at 3 m: 45 · Motor type: AC · Control: Speed controller · Impeller type: Mixed-flow · Casing material: Plastik · Installation in any position · Cable with mains plug · Temperature sensor

Connected air duct size Speed Phases Minimum supply voltage Maximum supply voltage Power supply frequency Rated power Unit current Maximum airflow Rotation speed at 50hz Sound pressure level LpA at 3 m Weight Transported air temperature (max) Ambient air temperature min Ambient air temperature max Ingress protection rating Ingress protection rating of the drive

Unit of measurement
mm V V Hz W A
m3/h –
dB(A) kg ° ° ° –

76 0.34 830

Turbo 200 G
200 2 1
230 230 50/60

108 0.48 1040

39

45

3.95

60

0

0

IPX4

IPX4

blaubergventilation.com.au

Dimensions

ØD

ØD1

B

H

L

199

209

239

261

295.5

blaubergventilation.com.au

Documents / Resources

BLAUBERG Turbo 200 G Mixed-Flow Inline Fans [pdf] Owner's Manual
200, Turbo 200 G Mixed-Flow Inline Fans, Turbo 200 G, Mixed-Flow Inline Fans, Inline Fans, Fans

References

Leave a comment

Your email address will not be published. Required fields are marked *