Blauberg-logo

Blauberg Turbo 150 Mixed Flow Inline Fans

Blauberg-Turbo-150-Mixed-Flow-Inline-Fan-product

Mixed-flow inline fans

  • Sound pressure level LpA at 3 m: 44
  • Motor type: AC
  • Control: Speed switch
  • Impeller type: Mixed-flow
  • Casing material: Plastik
  • Installation in any position
  • Cable with mains plug

Specifications

  Unit of measurement  

Turbo 150

Connected air duct size mm 150
Speed 2
Phases 1
Minimum supply voltage V 230
Maximum supply voltage V 230
Power supply frequency Hz 50/60
Rated power W 42 50
Unit current A 0.19 0.22
Maximum airflow m3/h 415 565
Rotation speed at 50Hz  
Sound pressure level LpA at 3 m dB(A) 32 44
Weight kg 2.95
Transported air temperature (max) °С 60
Ambient air temperature min °С 0
Ambient air temperature max °С 0
Ingress protection rating IPX4
Ingress protection rating of the drive IPX4

Blauberg-Turbo-150-Mixed-Flow-Inline-Fan-fig- (1)Blauberg-Turbo-150-Mixed-Flow-Inline-Fan-fig- (2)

Installation

  1. Ensure the connected air duct size matches the unit size (150mm).
  2. Connect the unit to a single-phase power supply with a voltage of 230V.
  3. Securely mount the unit in a suitable location with proper ventilation.

Ecodesign

Trademark Blauberg
Model Turbo 150
 

Specific energy consumption (SEC) (kWh/(m2/a))

Cold Average Warm
53.8 A+ 26.7 B 11.2 E
Type of ventilation unit Unidirectional
Type of drive installed Variable speed
Type of heat recovery system None
Maximum flow rate (m3/h) 500
Electric power input (W) 50
Reference flow rate (m3/s) 0.097
Reference pressure difference (Pa) 50
Specific power input (SPI) (W/(m3/h)) 0.12
Control typology Local demand control
Maximum external leakage rates (%) 2.7
Sound power level (dB(A)) 66
Declared typology RVU UVU
 

The annual electricity consumption (AEC) (kWh/a)

Cold Average Warm
64 64 64
 

The annual heating saved (AHS) (kWh/a)

Cold Average Warm
5536 2830 1280

Dimensions

ØD ØD1 B H L
148 187 220 251 289

Blauberg-Turbo-150-Mixed-Flow-Inline-Fan-fig-3

Operation

  1. Turn on the unit and select the desired speed setting (2 available).
  2. Monitor the airflow and adjust settings as needed to maintain desired ventilation.
  3. Check and clean the unit regularly to ensure optimal performance.

FAQs

What is the maximum airflow of the Turbo 150 unit?

The maximum airflow of the Turbo 150 unit is 565m3-h.

What is the sound pressure level of the unit at a distance of 3 meters?

The sound pressure level (LpA) at 3 meters for the Turbo 150 unit is 44dB.

Documents / Resources

Blauberg Turbo 150 Mixed Flow Inline Fans [pdf] User Guide
Turbo 150, Turbo 150 Mixed Flow Inline Fans, Turbo 150, Mixed Flow Inline Fans, Inline Fans, Fans

References

Leave a comment

Your email address will not be published. Required fields are marked *