BLAUBERG Primo 355 Inline Mixed Flow Fans
Specifications
| Unit of measurement |
Primo 355 |
|||
| Connected air duct size | mm | 355 | ||
| Speed | – | 3 | ||
| Phases | – | 1 | ||
| Minimum supply voltage | V | 230 | ||
| Maximum supply voltage | V | 230 | ||
| Power supply frequency | Hz | 50 | ||
| Rated power | W | 126 | 131 | 150 |
| Unit current | A | 0.60 | 0.58 | 0.66 |
| Maximum airflow | m3/h | 2090 | 2296 | 2485 |
| Rotation speed at 50hz | – | 1350 | 1400 | 1470 |
| Sound pressure level LpA at 3 m | dB(A) | 47 | 47 | 49 |
| Transported air temperature (max) | °С | 55 | ||
| Transported air temperature (min) | °С | -25 | ||
| Ingress protection rating | – | IPX4 | ||
| Ingress protection rating of the drive | – | IP20 | ||
Dimensions
| Ø D | Ø D1 | B | L |
| 350 | 390 | 450 | 388 |
Product Usage Instructions
Installation
- Ensure the unit is disconnected from the power supply before installation.
- Position the Primo 355 in a suitable location where it can efficiently ventilate the area.
- Connect the air duct size of 355mm to the appropriate ventilation system or outlet.
- Secure the unit in place according to the manufacturer’s instructions.
Operation
- Ensure the power supply voltage is within the specified range of 230V.
- Select the desired speed setting using the control panel of the Primo 355.
- Monitor the airflow and adjust as needed to achieve optimal ventilation.
Primo 355
Inline mixed flow fans
- Sound pressure level LpA at 3 m: 49
- Motor type: AC
- Control: Speed controller
- Impeller type: Mixed-flow
- Casing material: Plastik
- Installation in any position
Maintenance
- Regularly clean the air ducts to prevent blockages and maintain airflow efficiency.
- Check for any unusual sounds or vibrations during operation and address them promptly.
- Follow the manufacturer’s guidelines for periodic maintenance tasks to ensure longevity of the product.
FAQs
Q: What is the maximum transported air temperature for the Primo 355?
A: The maximum transported air temperature for the Primo 355 is 55°C.
Q: What is the Ingress protection rating of the drive?
A: The Ingress protection rating of the drive for the Primo 355 is IP20.
Documents / Resources
 |
BLAUBERG Primo 355 Inline Mixed Flow Fans [pdf] Owner's Manual 355, Primo 355 Inline Mixed Flow Fans, Primo 355, Inline Mixed Flow Fans, Mixed Flow Fans, Flow Fans, Fans |