BIXOLON SRP-380 Thermal POS Printer Command
Specifications
- Brand: BIXOLON
- Product Type: Thermal POS Printer
- Supported Models:
- 180dpi Models: SRP-380, SRP-380II, SRP-F310II, SRP-350plusIII, SRP-350plusV, SRP-350III, SRP-350V, SRP-330II, SRP-330III, SRP-E300, SRP-Q300, SRP-QE300
- 203dpi Models: SRP-382, SRP-382II, SRP-F312II, SRP-352plusIII, SRP-352plusV, SRP-352III, SRP-352V, SRP-332II, SRP-332III
- SRP-E302, SRP-B300, SRP-Q302, SRP-Q300II, SRP-QE302, SRP-Q200, SRP-S300, SRP-S320, SRP-S200, SRP-S3000
Control Commands List
Here is a list of control commands in alphanumeric order along with their functions:
| No. | Command | Function |
|---|
Printing Instructions
Follow these steps to print using the thermal POS printer:
- Ensure the printer is connected to a power source and turned on.
- Load the appropriate paper roll into the printer.
- Send the print command from your device to the printer using the supported commands.
- The printer will process the command and print the desired content on the paper.
Frequently Asked Questions
Q: Can I use any type of paper with the thermal POS printer?
A: It is recommended to use thermal paper rolls specifically designed for thermal printers to ensure optimal print quality and performance.
Q: How do I check the status of the printer?
A: You can use the control commands listed in the manual to transmit real-time status and check the printer’s condition.
Documents / Resources
 |
BIXOLON SRP-380 Thermal POS Printer Command [pdf] User Manual SRP-380 Thermal POS Printer Command, SRP-380, Thermal POS Printer Command, POS Printer Command, Printer Command, Command |