Biolab-LOGO

Biolab BPIP-403 Manual Pipette Controller

Biolab-BPIP-403-Manual-Pipette-Controller-PRODUCT

Product Information

  • The Manual Pipette Controller BPIP-403 offers precise control of pipetting speeds, ranging from drop by drop to fast liquid displacement.
  • It is designed to provide comfortable and straightforward pipetting experiences, even during extended sessions.
  • This lightweight device is ideal for use in laboratories and research settings across various industries such as Liquid Handling, Institutes, Pharmaceutical, Industrial, Microbiology, Chemistry, Biology, Medical, and Research.
  • The BPIP-403 is also known by alternative names such as Pipetaid, Pipet Gun, and Laboratory Pipette Controller.
  • It features chemical resistance, human-engineered design, lightweight construction, and a strong structure.
  • The unit is both lightweight and dexterous for easy operation and offers a wide volume range for precise liquid control.

Product Usage Instructions

Preparation

  • Before using the Manual Pipette Controller BPIP-403, ensure that it is clean and free from any obstructions that may affect its performance.
  • Attach the appropriate pipette tip securely to the controller.

Pipetting

  • Hold the pipette controller comfortably in your hand and immerse the tip into the liquid to be dispensed.
  • Squeeze the controller’s bulb gently to draw in the liquid. Release the bulb slowly to dispense the desired amount of liquid.

Speed Adjustment

  • To adjust the speed of pipetting, control the pressure applied to the bulb.
  • For slower dispensing speeds, exert gentle pressure on the bulb, while for faster speeds, apply firmer pressure.

Maintenance

  • After each use, clean the pipette controller following the manufacturer’s guidelines to ensure optimal performance and longevity.
  • Store the device in a clean and dry environment when not in use.

Introduction

MANUAL PIPETTE CONTROLLER BPIP-403

  • Pipette Controller offers an unmatched control of pipetting speeds from drop by drop or gravity dispense to fast liquid displacement.
  • Designed for comfortable and uncomplicated pipetting even during long-lasting sessions. It is lightweight and easy to use in a laboratory and for research purposes.
  • Used in Liquid Handling Task, Institutes, Pharmaceutical, Industrial, Microbiology, Chemistry, Biology, Medical, Laboratory, Research.
  • Also known as Pipetaid, Pipet Gun, Laboratory Pipette Controller.

BPIP-403 MANUAL PIPETTE CONTROLLER

  • Chemical resistance
  • Human engineering design
  • Lightweight and structurally strong
  • Lightweight and dexterous for operation
  • A wide range of volume for liquid controlling

Biolab-BPIP-403-Manual-Pipette-Controller-FIG-1

SPECIFICATIONS

Model BPIP-403
Volume 0.1ml-100 ml
Colour Red parts + Gray ball
Unit 20

CONTACT

FAQ

Q: What is the recommended way to clean the Manual Pipette Controller BPIP-403?

A: It is recommended to clean the pipette controller by rinsing it with a mild detergent solution and then thoroughly rinsing with distilled water. Allow it to air dry before storing or using it again.

Q: Can the BPIP-403 be used with corrosive chemicals?

A: The BPIP 403 is designed with chemical resistance however it is always advisable to refer to the product manual or contact the manufacturer for specific compatibility with corrosive chemicals.

Documents / Resources

Biolab BPIP-403 Manual Pipette Controller [pdf] User Guide
BPIP-403, BPIP-403 Manual Pipette Controller, BPIP-403, Manual Pipette Controller, Controller

References

Leave a comment

Your email address will not be published. Required fields are marked *