BINZHOU-LOGO

BINZHOU PW30 Multi Functional Wireless Charging Case

BINZHOU-PW30-Multi-Functional-Wireless-Charging-Case-PRODUCT

FAQ

Q: What devices are compatible with wireless charging on the PW30?

A: The PW30 supports wireless charging for iPhone, Huawei, Xiaomi, Samsung phones, TWS earphones, I-Watch, and more.

Q: How do I know when the device is fully charged?

A: The LED indicators on the PW30 will show different patterns based on the charging status. Refer to the manual for specific indications.

Product Introduction

PW30 is a multifunctional wireless charging dock. Using TYPE-C 65W power supply and 15W.5W.3W wireless charging, it can simultaneously support various types of wireless charging phones, AriPods, and iWhacth. It can also power laptops, USB-A, and TYPE-C charging ports through the C-port, and can charge 5 devive simultaneously, reducing unnecessary desktop usage and improving space efficiency. 60 ° foldable bracket design, precise magnetic suction function, supports iPhone magnetic suction magsafe protocol, making your work and life more convenient.

BINZHOU-PW30-Multi-Functional-Wireless-Charging-Case-FIG-1

Hardware Spec Standard

Hardware specification
Solution Platform IP6862
LED Power indicator white, ambient light white
Size 81mm*63mm
Bracket angle ~55°
Net weight ~313g

Function operation definition

 

Power on

Insert a 65W charging wire into the TYPE-C IN port (input requires a DC power supply greater than 60W)
 

Led on

 

Touch switch

 

IWatch Changing

Press the side storage compartment to eject and pull it out, then press the storage compartment again to retract it

Wireless charging specification

 

Input power

20V/3.25A(<50W,TYPE-C OUT no-output)
 

Out power

 

15W.5W.3W.TYPE-C 45W.USB-A 5W

 

Sensing distance

5mm(max)
 

Support equipment

Wireless charging supports iPhone, Huawei, Xiaomi, Samsung phones, TWS earphones, I-Watch, etc. The C-port output supports high-power products such as tablets and laptops, while the A-port supports regular product charging
 

Foreign induction

 

Non wireless charging to receive metal items

Standby power <0.7W

LED light indicator LED

 

Power on

 

The power light flashes 3times quickly

 

Scene LED

 

Touch to stay on, touch again to turn off

 

External charging

The power light stays on for a long time, and the ambient light flashes 3 times (observe the status display on the dial when charging the watch)
 

Charging removal

 

The power light flashes quickly twice

 

Device charging

 

The ambient light flashes three times quickly

 

Foreign matter detection

 

The white light flashes rapidly until the foreign object is removed

FCC Statement

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible or compliance could void the user’s authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

Radiation Exposure Statement
This device complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co‐located or operating in conjunction with any other antenna or transmitter. During the operation of device a distance of 15 cm surrounding the device and 20 cm above the top surface of the device must be respected.

Documents / Resources

BINZHOU PW30 Multi Functional Wireless Charging Case [pdf] User Manual
PW30, PW30 Multi Functional Wireless Charging Case, Multi Functional Wireless Charging Case, Wireless Charging Case, Charging Case, Case

References

Leave a comment

Your email address will not be published. Required fields are marked *