BINTEC COMMUNICATIONS Software Reference Owner’s Manual

Software Reference

A detailed technical guide to the technologies and configuration of BinTec products.

Introduction	Telephony Services	X.25
The BinTec Router Features	CAPI Information Values	Frame Relay
The SNMP Shell	Ethernet Framing	IP Sec
ISDN	ISDN Error Codes	H.323 (English, German)
System Administration	Syslog Messages	Glossary of Networking Terms
IP	OSPF
Bridging	RADIUS
IPX	TAF
CAPI Server	Virtual Private Networking

Copyright © 2002 BinTec Communications AG
Version 2.9, Document #71040A, October 2002
Purpose
This manual provides a description of the system software for all BinTec routers.

Liability

While every effort has been made to ensure the accuracy of all information in this manual, BinTec Communications AG cannot assume liability to any party for any loss or damage caused by errors or omissions or by statements of any kind in this document and is only liable within the scope of its terms of sale and delivery.
The information in this manual is subject to change without notice. For additional information, including changes to this document, please refer to the most recent version of this document and/or separate Release Notes which can be found at www.bintec.net.
As a multiprotocol router, the BinTec router sets up WAN connections in accordance with the system configuration. To prevent unintentional charges accumulating, the operation of the product should be carefully monitored. BinTec Communications AG accepts no liability for loss of data, unintentional connection costs and damages resulting from unsupervised operation of the product.
Trademarks
BinTec and the BinTec logo are registered trademarks of BinTec Communications AG.
All other product names and trademarks mentioned are the property of the respective companies and manufacturers.
Copyright
All rights are reserved. No part of this publication may be reproduced or transmitted in any form or by any means-graphic, electronic, or mechanical-including photocopying, recording in any medium, taping, or storage in information retrieval systems, without the prior written permission of BinTec Communications AG. Adaptation and especially translation of the document is inadmissible without the prior consent of BinTec Communications AG.

How to reach BinTec