Bigzzia logoBigzzia HB-866-5j Treadmill Radio Frequency Replacement Clone Remote Control433M remote control instruction manual

HB-866-5j Treadmill Radio Frequency Replacement Clone Remote Control

Pictures of objects:

Bigzzia HB-866-5j Treadmill Radio Frequency Replacement Clone Remote Control - assembly

Parameters:

Product Model: HB-866-5j
Operating voltage: DC3V (one 2032 button battery)
Operating current: less than 20MA when transmitting
Operating frequency: 433.92MHZ
Modulation mode: OOK
Standby current: less than 5UA
Size: 98*40.5*11mm
Product quality: 24.5g

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

  1. this device may not cause harmful interference, and
  2. this device must accept any interference received, including interference that may cause undesired operation

Instructions for operation:

  1. Press the PLAY button, send signal, open the machine, release to stop sending.
  2. Press the+key, send signal,speed+, release to stop sending.
  3. Press the-key, send signal,speed-, release to stop sending.

Application production scene:

  1. The treadmill remote control
  2. remote control toys.
  3. Smart furniture. , etc.
  4. Wireless remote control

Warning:
This device has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This device generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this device does cause harmful interference to radio or television reception, which can be determined by turning the device off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
–Reorient or relocate the receiving antenna.
–Increase the separation between the device and receiver.
–Connect the device into an outlet on a circuit different from that to which the receiver is connected.
–Consult the dealer or an experienced radio/TV technician for help
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.Bigzzia logo

Documents / Resources

Bigzzia HB-866-5j Treadmill Radio Frequency Replacement Clone Remote Control [pdf] Instruction Manual
HB-866-5j Treadmill Radio Frequency Replacement Clone Remote Control, HB-866-5j, Treadmill Radio Frequency Replacement Clone Remote Control, Radio Frequency Replacement Clone Remote Control, Frequency Replacement Clone Remote Control, Replacement Clone Remote Control, Clone Remote Control, Remote Control, Control

References

Leave a comment

Your email address will not be published. Required fields are marked *