F7 ePaper Frame
“
Specifications
- Dimensions: 105.00 mm x 75.00 mm
- Version: V1.1
- Interface: Type-C
- Features: OTA, PPI, WiFi
- Display: F7 7.3 inches, 800 x 480 pixels, 127 PPI
- Battery: 1300mAh
- Connectivity: 2.4GHz
- Brand: Bigme EverFrame
Product Usage Instructions
Setting Up the Device
- Charge the device fully using the provided charger.
- Power on the device by pressing and holding the power button
for a few seconds. - Follow the on-screen instructions to complete the initial setup
process.
Connecting to WiFi
To connect to a WiFi network:
- Go to the settings menu on the device.
- Select WiFi and choose your network from the list of available
networks. - Enter the password for the network if required and
connect.
Using Bigme App
To use the Bigme App:
- Download the Bigme App from Google Play Store or Apple App
Store. - Install the app on your device.
- Open the app and follow the on-screen instructions to set it
up.
FAQ
Q: How do I update the device software?
A: To update the software, go to the settings menu, select
‘System Update,’ and follow the on-screen instructions to download
and install the latest updates.
Q: How can I reset the device to factory settings?
A: To reset the device, go to the settings menu, select ‘Backup
& Reset,’ and choose ‘Factory Data Reset.’ Note that this will
erase all data on the device.
“`
105.00 mm
75.00 mm
V1.1
Type-c
:3; :; :8;
ota
PPI WIFI
F7 7.3 800*480px 127PPI 1300mAh 2.4Ghz
Bigme EverFrame
V1.1
APP: 1Android”Bigme”APP “Bigme”APP;iosAppStore “Bigme”APP;
2APP;
:
1″”WIFI(:2.4GHzWIFI); 23; 3APP”””” Bigme
:
1APP””” “; 2; 3
:
160120:
1; 2( ); 3Bigme(); 4(<5), ; 5; 6( ); 7(:)
(=+ +)
: : : : (SN): :
Problem description
WARRANTY CARD
Certificate QC02
Address: 01,18th Floor,COFCO Group Building, No. 3,Longjing 2nd Road, Longjing Community,Xin’an Street,Bao’an District,Shenzhen,China
105.00 mm
Product Appearance description
Screen Type-C power port
Support rod fixing hole Power button
Indicator light Hidden hook
Power button operation instructions: Network configuration: Press and hold the power button for 3 seconds to enter the network configuration mode; Change picture: Press the power button briefly to refresh the picture; Reboot: Press and hold the power button for 8 seconds to force a reboot.
Indicator light instructions:
The traffic lights in the distribution network mode flash alternately. 2. The green light for network connection flashes, and the green light for successful network connection remains on constantly. 3. The red light for ota upgrade flashes;
Basic information
Product Name Product Model Display size Resolution PPI Battery capacity WIFI
ePaper Frame F7 7.3” 800*480px 127PPI 1300mAh 2.4Ghz
Packaging list
Bigme iFrame QUICK START GUIDE
V1.1
ePaper Frame
Support rod Product Instruction Manual
Usage method
To install the APP:
1. For Android devices, scan the QR code below with your browser to download the “Bigme Photo Frame” APP, or search for “Bigme Photo Frame” in the app store to download the APP. For iOS devices, search for “Bigme Photo Frame” in the App Store to download the APP.
2. After the complete download, open the APP and log in to register an account.
Distribution network 1. On the “Network Setup” interface, select a connectable Wi-Fi (Note: Only Wi-Fi of 2.4GHz is supported).
2. Press and hold the power button of the Bigme photo frame for 3 seconds to enter the network setup mode.
3. On the “Distribution Network” interface of the APP, click “Confirm”, and it will automatically search for and connect to nearby Bigme photo frames.
Upload image
1. On the “Photo Frame” interface of the APP, click ” picture;
” to select a
2. Crop and adjust the picture and confirm the upload;
3. After the upload is complete, press the power button of the photo frame briefly. The picture will be refreshed on the photo frame shortly.
Shutdown:
If there is no operation for 60 seconds in the networked standby state or 120 seconds in the network distribution mode, the device will automatically shut down;
Warranty Exclusions
To protect your legitimate rights and avoid unnecessary losses, Bigme shall not provide free warranty service for the following scenarios. Paid repair options are available. 1. Out of warranty. 2. Failure caused by incorrect installation, operation, or maintenance (e.g., physical damage). 3. Unauthorized Repairs Tampering/modifications by non-Bigme-certified technicians. 4. Screen Pixel Defects Up to <5 dead pixels (within factory standards) not eligible for return/refund. 5. Cosmetic Wear Natural aging, scratches, or dents on the casing. 6. Human/Accidental Damage Including:
Operational errors Incorrect voltage input Drops/liquid spills 7. Force Majeure Natural disasters (floods, fires, earthquakes, etc.).
Paid Repair Services: For out-of-warranty cases, fees include: = Technical Service Charge + Replacement Parts Cost + Shipping Fees
Certificate
QC02
FCC Statement
This equipment has been tested found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications However, there is no guarantee that interference will not occur in a particular installation. lf this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
-Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help. To assure continued compliance, any changes or modifications not expressly approved by the party. Responsible for compliance could void the user’s authority to operate this equipment. (Example-use only shielded interface cables when connecting to computer or peripheral devices).
This equipment complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)This device may not cause harmful interference, and (2)This device must accept any interference received, including interference that may cause undesired operation.
FCC Radiation Exposure Statement: The equipment complies with FCC Radiation exposure limits set forth for uncontrolled enviroment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body.
WARRANTY CARD
User Name: Contact Number: Detailed Address: Product Model: Serial Number(SN): Problem description:
Address: 01,18th Floor,COFCO Group Building, No. 3,Longjing 2nd Road, Longjing Community,Xin’an Street,Bao’an District,Shenzhen,China
75.00 mm
Documents / Resources
 |
Bigme F7 ePaper Frame [pdf] Instruction Manual F7, F7 ePaper Frame, ePaper Frame, Frame |